Modifications de comportement : applications ciblant Android 14 ou version ultérieure

Comme les versions précédentes, Android 14 apporte des modifications de comportement pouvant affecter votre application. Les modifications de comportement suivantes s'appliquent exclusivement aux applications qui ciblent Android 14 (niveau d'API 34) ou version ultérieure. Si votre application cible Android 14 ou une version ultérieure, vous devez la modifier pour qu'elle prenne en charge ces comportements, le cas échéant.

Veillez également à consulter la liste des modifications de comportement qui affectent toutes les applications exécutées sur Android 14, peu importe la targetSdkVersion de l'application.

Fonctionnalité de base

Le type de service au premier plan doit être indiqué

如果您的应用以 Android 14（API 级别 34）或更高版本为目标平台，则必须为应用中的每个前台服务至少指定一项前台服务类型。您应选择一个能代表应用用例的前台服务类型。系统需要特定类型的前台服务满足特定用例。

如果应用中的用例与这些类型均不相关，强烈建议您迁移逻辑以使用 WorkManager 或用户发起的数据传输作业。

Application de l'autorisation BLUETOOTH_CONNECT dans BluetoothAdapter

Android 14 enforces the BLUETOOTH_CONNECT permission when calling the BluetoothAdapter getProfileConnectionState() method for apps targeting Android 14 (API level 34) or higher.

This method already required the BLUETOOTH_CONNECT permission, but it was not enforced. Make sure your app declares BLUETOOTH_CONNECT in your app's AndroidManifest.xml file as shown in the following snippet and check that a user has granted the permission before calling getProfileConnectionState.

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

Mises à jour OpenJDK 17

Android 14 将继续更新 Android 的核心库，以与最新 OpenJDK LTS 版本中的功能保持一致，包括适合应用和平台开发者的库更新和 Java 17 语言支持。

以下变更可能会影响应用兼容性：

  • 对正则表达式的更改：现在，为了更严格地遵循 OpenJDK 的语义，不允许无效的组引用。您可能会看到 java.util.regex.Matcher 类抛出 IllegalArgumentException 的新情况，因此请务必测试应用中使用正则表达式的情形。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 DISALLOW_INVALID_GROUP_REFERENCE 标志。
  • UUID 处理：现在，验证输入参数时，java.util.UUID.fromString() 方法会执行更严格的检查，因此您可能会在反序列化期间看到 IllegalArgumentException。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 ENABLE_STRICT_VALIDATION 标志。
  • ProGuard 问题：有时，在您尝试使用 ProGuard 缩减、混淆和优化应用时，添加 java.lang.ClassValue 类会导致问题。问题源自 Kotlin 库，该库会根据 Class.forName("java.lang.ClassValue") 是否会返回类更改运行时行为。如果您的应用是根据没有 java.lang.ClassValue 类的旧版运行时开发的，则这些优化可能会将 computeValue 方法从派生自 java.lang.ClassValue 的类中移除。

JobScheduler renforce le comportement des rappels et du réseau

Since its introduction, JobScheduler expects your app to return from onStartJob or onStopJob within a few seconds. Prior to Android 14, if a job runs too long, the job is stopped and fails silently. If your app targets Android 14 (API level 34) or higher and exceeds the granted time on the main thread, the app triggers an ANR with the error message "No response to onStartJob" or "No response to onStopJob".

This ANR may be a result of 2 scenarios: 1. There is work blocking the main thread, preventing the callbacks onStartJob or onStopJob from executing and completing within the expected time limit. 2. The developer is running blocking work within the JobScheduler callback onStartJob or onStopJob, preventing the callback from completing within the expected time limit.

To address #1, you will need to further debug what is blocking the main thread when the ANR occurs, you can do this using ApplicationExitInfo#getTraceInputStream() to get the tombstone trace when the ANR occurs. If you're able to manually reproduce the ANR, you can record a system trace and inspect the trace using either Android Studio or Perfetto to better understand what is running on the main thread when the ANR occurs. Note that this can happen when using JobScheduler API directly or using the androidx library WorkManager.

To address #2, consider migrating to WorkManager, which provides support for wrapping any processing in onStartJob or onStopJob in an asynchronous thread.

JobScheduler also introduces a requirement to declare the ACCESS_NETWORK_STATE permission if using setRequiredNetworkType or setRequiredNetwork constraint. If your app does not declare the ACCESS_NETWORK_STATE permission when scheduling the job and is targeting Android 14 or higher, it will result in a SecurityException.

API de lancement des tuiles

对于以 Android 14 及更高版本为目标平台的应用， TileService#startActivityAndCollapse(Intent) 已弃用，现在会抛出 调用时抛出异常。如果您的应用从功能块启动 activity，请使用 TileService#startActivityAndCollapse(PendingIntent)。

Confidentialité

Accès limité aux photos et aux vidéos

Android 14 introduces Selected Photos Access, which allows users to grant apps access to specific images and videos in their library, rather than granting access to all media of a given type.

This change is only enabled if your app targets Android 14 (API level 34) or higher. If you don't use the photo picker yet, we recommend implementing it in your app to provide a consistent experience for selecting images and videos that also enhances user privacy without having to request any storage permissions.

If you maintain your own gallery picker using storage permissions and need to maintain full control over your implementation, adapt your implementation to use the new READ_MEDIA_VISUAL_USER_SELECTED permission. If your app doesn't use the new permission, the system runs your app in a compatibility mode.

Expérience utilisateur

Notifications d'intent plein écran sécurisées

With Android 11 (API level 30), it was possible for any app to use Notification.Builder.setFullScreenIntent to send full-screen intents while the phone is locked. You could auto-grant this on app install by declaring USE_FULL_SCREEN_INTENT permission in the AndroidManifest.

Full-screen intent notifications are designed for extremely high-priority notifications demanding the user's immediate attention, such as an incoming phone call or alarm clock settings configured by the user. For apps targeting Android 14 (API level 34) or higher, apps that are allowed to use this permission are limited to those that provide calling and alarms only. The Google Play Store revokes default USE_FULL_SCREEN_INTENT permissions for any apps that don't fit this profile. The deadline for these policy changes is May 31, 2024.

This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.

You can use the new API NotificationManager.canUseFullScreenIntent to check if your app has the permission; if not, your app can use the new intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT to launch the settings page where users can grant the permission.

Sécurité

Restrictions concernant les intents implicites et en attente

For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:

  • Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
  • If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.

These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.

For example, here is an intent filter that could be declared in your app's manifest file:

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

If your app tried to launch this activity using an implicit intent, an ActivityNotFoundException exception would be thrown:

Kotlin

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

To launch the non-exported activity, your app should use an explicit intent instead:

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

Les broadcasts receivers enregistrés lors de l'exécution doivent spécifier le comportement d'exportation

Apps and services that target Android 14 (API level 34) or higher and use context-registered receivers are required to specify a flag to indicate whether or not the receiver should be exported to all other apps on the device: either RECEIVER_EXPORTED or RECEIVER_NOT_EXPORTED, respectively. This requirement helps protect apps from security vulnerabilities by leveraging the features for these receivers introduced in Android 13.

Exception for receivers that receive only system broadcasts

If your app is registering a receiver only for system broadcasts through Context#registerReceiver methods, such as Context#registerReceiver(), then it shouldn't specify a flag when registering the receiver.

Chargement de code dynamique plus sécurisé

If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.

If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

Handle dynamically-loaded files that already exist

To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.

Restrictions supplémentaires concernant le démarrage d'activités en arrière-plan

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，系统会进一步限制允许应用在后台启动 activity 的时间：

这些更改扩大了一组现有限制条件的范围，目的是防止恶意应用滥用 API 以在后台启动干扰性活动，从而保护用户。

Traversée de répertoire ZIP

For apps targeting Android 14 (API level 34) or higher, Android prevents the Zip Path Traversal Vulnerability in the following way: ZipFile(String) and ZipInputStream.getNextEntry() throws a ZipException if zip file entry names contain ".." or start with "/".

Apps can opt-out from this validation by calling dalvik.system.ZipPathValidator.clearCallback().

For apps targeting Android 14 (API level 34) or higher, a SecurityException is thrown by MediaProjection#createVirtualDisplay in either of the following scenarios:

Your app must ask the user to give consent before each capture session. A single capture session is a single invocation on MediaProjection#createVirtualDisplay, and each MediaProjection instance must be used only once.

Handle configuration changes

If your app needs to invoke MediaProjection#createVirtualDisplay to handle configuration changes (such as the screen orientation or screen size changing), you can follow these steps to update the VirtualDisplay for the existing MediaProjection instance:

  1. Invoke VirtualDisplay#resize with the new width and height.
  2. Provide a new Surface with the new width and height to VirtualDisplay#setSurface.

Register a callback

Your app should register a callback to handle cases where the user doesn't grant consent to continue a capture session. To do this, implement Callback#onStop and have your app release any related resources (such as the VirtualDisplay and Surface).

If your app doesn't register this callback, MediaProjection#createVirtualDisplay throws an IllegalStateException when your app invokes it.

Mise à jour des restrictions non SDK

Android 14 inclut des listes à jour d'interfaces non SDK limitées grâce à la collaboration avec les développeurs Android et aux derniers tests internes. Dans la mesure du possible, nous nous assurons que des alternatives publiques sont disponibles avant de limiter les interfaces non SDK.

Si votre application ne cible pas Android 14, certaines de ces modifications ne vous affecteront peut-être pas immédiatement. Cependant, bien que vous puissiez actuellement utiliser certaines interfaces non SDK (en fonction du niveau d'API cible de votre application), l'utilisation d'un champ ou d'une méthode non SDK présente toujours un risque élevé d'endommager votre application.

Si vous n'êtes pas sûr que votre application utilise des interfaces non SDK, vous pouvez tester votre application pour le savoir. Si votre application repose sur des interfaces non SDK, vous devriez commencer à planifier une migration vers des alternatives SDK. Nous comprenons néanmoins que certaines applications ont des cas d'utilisation valides pour utiliser des interfaces non SDK. Si vous ne trouvez pas d'alternative à l'utilisation d'une interface non SDK pour une fonctionnalité de votre application, vous devriez demander une nouvelle API publique.

如需详细了解此 Android 版本中的变更，请参阅 Android 14 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息，请参阅对非 SDK 接口的限制。