Google 會運用 AI 技術將內容翻譯成你偏好的語言，但可能會出錯。

功能與 API 總覽

Android 15 為開發人員推出了強大的功能和 API。以下各節將摘要說明這些功能，協助您開始使用相關 API。

如需新增、修改及移除 API 的詳細清單，請參閱 API 差異比較表。如要進一步瞭解新增的 API，請參閱 Android API 參考資料。如果是 Android 15，請尋找 API 級別 35 中新增的 API。如要瞭解平台變更可能對應用程式造成的影響，請務必查看指定 Android 15 的應用程式和所有應用程式的 Android 15 行為變更。

相機與媒體

Android 15 包含多項功能，可改善相機和媒體體驗，並提供工具和硬體，協助創作者在 Android 上實現創意。

如要進一步瞭解 Android 媒體和相機的最新功能和開發人員解決方案，請參閱 Google I/O 的「打造現代 Android 媒體和相機體驗」演講。

低光源增強

Android 15 introduces Low Light Boost, an auto-exposure mode available to both Camera 2 and the night mode camera extension. Low Light Boost adjusts the exposure of the Preview stream in low-light conditions. This is different from how the night mode camera extension creates still images, because night mode combines a burst of photos to create a single, enhanced image. While night mode works very well for creating a still image, it can't create a continuous stream of frames, but Low Light Boost can. Thus, Low Light Boost enables camera capabilities, such as:

Providing an enhanced image preview, so users are better able to frame their low-light pictures
Scanning QR codes in low light

If you enable Low Light Boost, it automatically turns on when there's a low light level, and turns off when there's more light.

Apps can record off the Preview stream in low-light conditions to save a brightened video.

For more information, see Low Light Boost.

應用程式內相機控制項

Android 15 adds an extension for more control over the camera hardware and its algorithms on supported devices:

Advanced flash strength adjustments enabling precise control of flash intensity in both SINGLE and TORCH modes while capturing images.

HDR 餘裕控制

Android 15 chooses HDR headroom that is appropriate for the underlying device capabilities and bit-depth of the panel. For pages that have lots of SDR content, such as a messaging app displaying a single HDR thumbnail, this behavior can end up adversely influencing the perceived brightness of the SDR content. Android 15 lets you control the HDR headroom with setDesiredHdrHeadroom to strike a balance between SDR and HDR content.

The brightness of SDR UI elements on the left screen appears to be more uniform than the brightness on the right screen, which simulates possible headroom issues when HDR and SDR content are mixed. By adjusting the HDR headroom, you can achieve a better balance between the SDR and HDR content.

音量控制

Android 15 introduces support for the CTA-2075 loudness standard to help you avoid audio loudness inconsistencies and ensure users don't have to constantly adjust volume when switching between content. The system leverages known characteristics of the output devices (headphones and speaker) along with loudness metadata available in AAC audio content to intelligently adjust the audio loudness and dynamic range compression levels.

To enable this feature, you need to ensure loudness metadata is available in your AAC content and enable the platform feature in your app. For this, you instantiate a LoudnessCodecController object by calling its create factory method with the audio session ID from the associated AudioTrack; this automatically starts applying audio updates. You can pass an OnLoudnessCodecUpdateListener to modify or filter loudness parameters before they are applied on the MediaCodec.

// Media contains metadata of type MPEG_4 OR MPEG_D
val mediaCodec = …
val audioTrack = AudioTrack.Builder()
                                .setSessionId(sessionId)
                                .build()
...
// Create new loudness controller that applies the parameters to the MediaCodec
try {
   val lcController = LoudnessCodecController.create(mSessionId)
   // Starts applying audio updates for each added MediaCodec
}

AndroidX media3 ExoPlayer will also be updated to use the LoudnessCodecController APIs for a seamless app integration.

虛擬 MIDI 2.0 裝置

Android 13 添加了对使用 USB 连接 MIDI 2.0 设备的支持，这些设备使用通用 MIDI 数据包 (UMP) 进行通信。Android 15 将 UMP 支持扩展到了虚拟 MIDI 应用，使作曲应用能够像使用 USB MIDI 2.0 设备一样，将虚拟 MIDI 2.0 设备用作控制合成器应用的设备。

更有效率的 AV1 軟體解碼

dav1d 標誌

dav1d 是 VideoLAN 推出的熱門 AV1 軟體解碼器，適用於不支援硬體 AV1 解碼功能的 Android 裝置。dav1d 的效能比舊版 AV1 軟體解碼器高出 3 倍，可讓更多使用者 (包括部分低階和中階裝置) 播放 HD AV1 影片。

您的應用程式必須透過名稱 "c2.android.av1-dav1d.decoder" 呼叫 dav1d，才能選擇使用 dav1d。在後續更新中，dav1d 將成為預設的 AV1 軟體解碼器。這項支援功能已標準化，並向後移植至接收 Google Play 系統更新的 Android 11 裝置。

開發人員工作效率和工具

雖然我們為了提高您的工作效率，大部分的工作都集中在 Android Studio、Jetpack Compose 和 Android Jetpack 程式庫等工具上，但我們也一直在尋找平台上的方法，協助您更輕鬆地實現願景。

OpenJDK 17 更新

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

The following key features and improvements are included:

Quality-of-life improvements around NIO buffers
Streams
Additional math and strictmath methods
util package updates including sequenced collection, map, and set
ByteBuffer support in Deflater
Security updates such as X500PrivateCredential and security key updates

These APIs are updated on over a billion devices running Android 12 (API level 31) and higher through Google Play System updates, so you can target the latest programming features.

PDF 改善項目

Android 15 对 PdfRenderer API 进行了重大改进。应用可以整合呈现等高级功能受密码保护的文件、注释、表单编辑、 searching，而 selection 则包含副本。支持线性化 PDF 优化，此功能可加快本地 PDF 查看速度并减少资源使用量。Jetpack PDF 库使用这些 API 来简化 PDF 的添加查看功能。

PdfRenderer 已移至一个可使用 Google Play 系统更新独立于平台版本，并且我们支持将这些变更还原到 Android 11（API 级别 30），方法是创建兼容的 Android 15 之前版本的 API Surface，称为 PdfRendererPreV。

自動切換語言功能更臻完善

Android 14 在音訊中新增了裝置端多語言辨識功能，可自動切換語言，但這可能會導致字詞遺漏，尤其是在兩次發音之間的暫停時間較短時。Android 15 新增了額外控制項，協助應用程式根據用途調整此切換功能。EXTRA_LANGUAGE_SWITCH_INITIAL_ACTIVE_DURATION_TIME_MILLIS 會將自動切換限制在音訊工作階段的開頭，而 EXTRA_LANGUAGE_SWITCH_MATCH_SWITCHES 會在指定次數的切換後停用語言切換功能。如果您預期在工作階段中會使用單一語言，且該語言應自動偵測，這些選項就特別實用。

改良 OpenType Variable Font API

Android 15 提高了 OpenType 可变字体的易用性。您可以创建来自可变字体的 FontFamily 实例，而不指定粗细轴使用 buildVariableFamily API。文本渲染程序会替换 wght 轴的值，以匹配显示的文本。

使用该 API 可以大大简化创建 Typeface 的代码：

Kotlin

val newTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build()

Java

Typeface newTypeface = Typeface.CustomFallbackBuilder(
            new FontFamily.Builder(
                new Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build();

以前，如需创建相同的 Typeface，您需要更多代码：

Kotlin

val oldTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf")
                    .setFontVariationSettings("'wght' 400")
                    .setWeight(400)
                    .build())
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 100")
                        .setWeight(100)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 200")
                        .setWeight(200)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 300")
                        .setWeight(300)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 500")
                        .setWeight(500)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 600")
                        .setWeight(600)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 700")
                        .setWeight(700)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 800")
                        .setWeight(800)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 900")
                        .setWeight(900)
                        .build()
                ).build()
        ).build()

Java

Typeface oldTypeface = new Typeface.CustomFallbackBuilder(
    new FontFamily.Builder(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 400")
            .setWeight(400)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 100")
            .setWeight(100)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 200")
            .setWeight(200)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 300")
            .setWeight(300)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 500")
            .setWeight(500)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 600")
            .setWeight(600)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 700")
            .setWeight(700)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 800")
            .setWeight(800)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 900")
            .setWeight(900)
            .build()
    )
    .build()
).build();

以下示例展示了同时使用旧版和新版 API 创建的 Typeface 的呈现方式：

使用新旧 API 渲染字体时出现差异的示例

在此示例中，使用旧 API 创建的 Typeface 不包含为 350、450、550 和 650 创建准确的字体粗细 Font 实例，因此渲染程序会回退到最接近的权重。在在此示例中，系统会渲染 300 而不是 350，渲染 400 而不是 450，依此类推。相比之下，使用新 API 创建的 Typeface 会为给定重量动态创建 Font 实例，因此系统也会为 350、450、550 和 650 呈现准确的重量。

精細的換行控制項

从 Android 15 开始，TextView 和底层行断开符可以将给定部分文本保留在同一行中，以提高可读性。您可以通过在字符串资源或 createNoBreakSpan 中使用 <nobreak> 标记来充分利用此换行符自定义功能。同样，您可以使用 <nohyphen> 标记或 createNoHyphenationSpan 来防止对字词进行分词。

例如，以下字符串资源不包含换行符，在呈现时，文本“Pixel 8 Pro”会在不合适的位置换行：

<resources>
    <string name="pixel8pro">The power and brains behind Pixel 8 Pro.</string>
</resources>

相比之下，此字符串资源包含 <nobreak> 标记，该标记会将字词“Pixel 8 Pro”换行，并防止换行：

<resources>
    <string name="pixel8pro">The power and brains behind <nobreak>Pixel 8 Pro.</nobreak></string>
</resources>

以下图片展示了这些字符串呈现方式的差异：

一行文本的布局，其中显示短语“Pixel 8 Pro.”未使用 <nobreak> 标记换行。

使用 <nobreak> 标记封装“Pixel 8 Pro.”短语的同一行文本的布局。

應用程式封存

Android 和 Google Play 去年宣布支援應用程式封存功能，使用者可以在 Google Play 上使用 Android App Bundle 發布的應用程式，從裝置上部分移除不常使用的應用程式，藉此釋出空間。Android 15 提供應用程式封存和解封存的作業系統層級支援功能，讓所有應用程式商店更輕鬆地實作這項功能。

具有 REQUEST_DELETE_PACKAGES 權限的應用程式可以呼叫 PackageInstaller requestArchive 方法，要求封存已安裝的應用程式套件，會移除 APK 和任何快取檔案，但會保留使用者資料。系統會透過 LauncherApps API；使用者會看到 UI 樣式，藉此突顯這些個應用程式已封存。使用者輕觸封存的應用程式時，負責的安裝程式會收到取消封存的要求，而且還原程序可以由 ACTION_PACKAGE_ADDED 廣播監控。

使用開發人員選項在裝置上啟用 16 KB 模式

切換「以 16KB 頁面大小啟動」開發人員選項，即可在 16 KB 模式下啟動裝置。

在 Android 15 的 QPR 版本中，您可以使用特定裝置上的開發人員選項，以 16 KB 模式啟動裝置，並執行裝置端測試。使用開發人員選項前，請依序前往「設定」>「系統」>「軟體更新」，並套用所有可用的更新。

下列裝置提供這項開發人員選項：

Pixel 8 和 8 Pro (搭載 Android 15 QPR1 以上版本)
Pixel 8a (搭載 Android 15 QPR1 以上版本)
Pixel 9、Pixel 9 Pro 和 Pixel 9 Pro XL (搭載 Android 15 QPR2 以上版本)
Pixel 9a (搭載 Android 16 以上版本)

圖形

Android 15 帶來最新的圖像改善項目，包括 ANGLE 和 Canvas 圖像系統的新增功能。

現代化 Android 的 GPU 存取權

Vulkan logo

Android hardware has evolved quite a bit from the early days where the core OS would run on a single CPU and GPUs were accessed using APIs based on fixed-function pipelines. The Vulkan® graphics API has been available in the NDK since Android 7.0 (API level 24) with a lower-level abstraction that better reflects modern GPU hardware, scales better to support multiple CPU cores, and offers reduced CPU driver overhead — leading to improved app performance. Vulkan is supported by all modern game engines.

Vulkan is Android's preferred interface to the GPU. Therefore, Android 15 includes ANGLE as an optional layer for running OpenGL® ES on top of Vulkan. Moving to ANGLE will standardize the Android OpenGL implementation for improved compatibility, and, in some cases, improved performance. You can test out your OpenGL ES app stability and performance with ANGLE by enabling the developer option in Settings -> System -> Developer Options -> Experimental: Enable ANGLE on Android 15.

The Android ANGLE on Vulkan roadmap

Roadmap of upcoming changes to the Android GPU APIs.

As part of streamlining our GPU stack, going forward we will be shipping ANGLE as the GL system driver on more new devices, with the future expectation that OpenGL/ES will be only available through ANGLE. That being said, we plan to continue support for OpenGL ES on all devices.

Recommended next steps

Use the developer options to select the ANGLE driver for OpenGL ES and test your app. For new projects, we strongly encourage using Vulkan for C/C++.

Canvas 改善項目

Android 15 continues our modernization of Android's Canvas graphics system with additional capabilities:

Matrix44 provides a 4x4 matrix for transforming coordinates that should be used when you want to manipulate the canvas in 3D.
clipShader intersects the current clip with the specified shader, while clipOutShader sets the clip to the difference of the current clip and the shader, each treating the shader as an alpha mask. This supports the drawing of complex shapes efficiently.

效能和電池

Android 持續致力於協助您提升應用程式的效能和品質。Android 15 導入的 API 可協助您更有效率地執行應用程式中的工作、最佳化應用程式效能，以及收集應用程式的深入分析資料。

如要瞭解電池效率最佳做法、偵錯網路和用電量，以及我們如何提升 Android 15 和近期 Android 版本中背景工作的電池效率，請參閱 Google I/O 大會的「提升 Android 背景工作的電池效率」演講。

ApplicationStartInfo API

在以前的 Android 版本中，应用启动一直是个谜。在应用中确定应用是从冷启动、温启动还是热启动状态启动很困难。您还很难了解应用在各种启动阶段（分叉进程、调用 onCreate、绘制第一个帧等）所花的时间。在 Application 类被实例化时，您无法知道应用是通过广播、content provider、作业、备份、启动完成、闹钟还是 Activity 启动的。

Android 15 上的 ApplicationStartInfo API 提供了所有这些功能，以及更多功能。您甚至可以选择在流程中添加自己的时间戳，以便在一个位置收集时间数据。除了收集指标之外，您还可以使用 ApplicationStartInfo 直接优化应用启动；例如，您可以消除在应用因广播而启动时在 Application 类中实例化与界面相关的库所带来的高昂开销。

詳細的應用程式大小資訊

Since Android 8.0 (API level 26), Android has included the StorageStats.getAppBytes API that summarizes the installed size of an app as a single number of bytes, which is a sum of the APK size, the size of files extracted from the APK, and files that were generated on the device such as ahead-of-time (AOT) compiled code. This number is not very insightful in terms of how your app is using storage.

Android 15 adds the StorageStats.getAppBytesByDataType([type]) API, which lets you get insight into how your app is using up all that space, including APK file splits, AOT and speedup related code, dex metadata, libraries, and guided profiles.

應用程式管理的分析

Android 15 includes the ProfilingManager class, which lets you collect profiling information from within your app such as heap dumps, heap profiles, stack sampling, and more. It provides a callback to your app with a supplied tag to identify the output file, which is delivered to your app's files directory. The API does rate limiting to minimize the performance impact.

To simplify constructing profiling requests in your app, we recommend using the corresponding Profiling AndroidX API, available in Core 1.15.0-rc01 or higher.

SQLite 資料庫改善項目

Android 15 introduces SQLite APIs that expose advanced features from the underlying SQLite engine that target specific performance issues that can manifest in apps. These APIs are included with the update of SQLite to version 3.44.3.

Developers should consult best practices for SQLite performance to get the most out of their SQLite database, especially when working with large databases or when running latency-sensitive queries.

Read-only deferred transactions: when issuing transactions that are read-only (don't include write statements), use beginTransactionReadOnly() and beginTransactionWithListenerReadOnly(SQLiteTransactionListener) to issue read-only DEFERRED transactions. Such transactions can run concurrently with each other, and if the database is in WAL mode, they can run concurrently with IMMEDIATE or EXCLUSIVE transactions.
Row counts and IDs: APIs were added to retrieve the count of changed rows or the last inserted row ID without issuing an additional query. getLastChangedRowCount() returns the number of rows that were inserted, updated, or deleted by the most recent SQL statement within the current transaction, while getTotalChangedRowCount() returns the count on the current connection. getLastInsertRowId() returns the rowid of the last row to be inserted on the current connection.
Raw statements: issue a raw SQlite statement, bypassing convenience wrappers and any additional processing overhead that they may incur.

Android 動態效能框架更新

Android 15 继续投资于 Android 动态性能框架 (ADPF)，这是一组 API，可让游戏和性能密集型应用更为直接地与 Android 设备的电源和散热系统进行互动。在受支持的设备上，Android 15 添加了 ADPF 功能：

针对提示会话的节能模式，用于指明其关联的线程应优先节能而非性能，非常适合长时间运行的后台工作负载。
系统可以在提示会话中报告 GPU 和 CPU 工作时长，以便同时调整 CPU 和 GPU 频率，以最佳方式满足工作负载需求。
热余量阈值，用于根据余量预测来解读可能的热节流状态。

如需详细了解如何在应用和游戏中使用 ADPF，请参阅相关文档。

隱私權

Android 15 包含多項功能，可協助應用程式開發人員保護使用者隱私。

螢幕錄影偵測

Android 15 adds support for apps to detect that they are being recorded. A callback is invoked whenever the app transitions between being visible or invisible within a screen recording. An app is considered visible if activities owned by the registering process's UID are being recorded. This way, if your app is performing a sensitive operation, you can inform the user that they're being recorded.

val mCallback = Consumer<Int> { state ->
  if (state == SCREEN_RECORDING_STATE_VISIBLE) {
    // We're being recorded
  } else {
    // We're not being recorded
  }
}

override fun onStart() {
   super.onStart()
   val initialState =
      windowManager.addScreenRecordingCallback(mainExecutor, mCallback)
   mCallback.accept(initialState)
}

override fun onStop() {
    super.onStop()
    windowManager.removeScreenRecordingCallback(mCallback)
}

擴充 IntentFilter 功能

Android 15 builds in support for more precise Intent resolution through UriRelativeFilterGroup, which contains a set of UriRelativeFilter objects that form a set of Intent matching rules that must each be satisfied, including URL query parameters, URL fragments, and blocking or exclusion rules.

These rules can be defined in the AndroidManifest XML file with the <uri-relative-filter-group> tag, which can optionally include an android:allow tag. These tags can contain <data> tags that use existing data tag attributes as well as the android:query and android:fragment attributes.

Here's an example of the AndroidManifest syntax:

<intent-filter android:autoVerify="true">
  <action android:name="android.intent.action.VIEW" />
  <category android:name="android.intent.category.BROWSABLE" />
  <category android:name="android.intent.category.DEFAULT" />
  <data android:scheme="http" />
  <data android:scheme="https" />
  <data android:host="astore.com" />
  <uri-relative-filter-group>
    <data android:pathPrefix="/auth" />
    <data android:query="region=na" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:query="mobileoptout=true" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:fragmentPrefix="faq" />
  </uri-relative-filter-group>
</intent-filter>

私人空間

The private space can be unlocked and locked to show or hide sensitive apps on a device.

Private space lets users create a separate space on their device where they can keep sensitive apps away from prying eyes, under an additional layer of authentication. The private space uses a separate user profile. The user can choose to use the device lock or a separate lock factor for the private space.

Apps in the private space show up in a separate container in the launcher, and are hidden from the recents view, notifications, settings, and from other apps when the private space is locked. User-generated and downloaded content (such as media or files) and accounts are separated between the private space and the main space. The system sharesheet and the photo picker can be used to give apps access to content across spaces when the private space is unlocked.

Users can't move existing apps and their data into the private space. Instead, users select an install option in the private space to install an app using whichever app store they prefer. Apps in the private space are installed as separate copies from any apps in the main space (new copies of the same app).

When a user locks the private space, the profile is stopped. While the profile is stopped, apps in the private space are no longer active and can't perform foreground or background activities, including showing notifications.

We recommend that you test your app with private space to make sure your app works as expected, especially if your app falls into one of the following categories:

Apps with logic for work profiles that assumes that any installed copies of their app that aren't in the main profile are in the work profile.
Medical apps
Launcher apps
App store apps

查詢使用者最近選取的相片存取權

現在應用程式只能醒目顯示最近選取的相片和影片授予媒體的部分存取權。這項功能可改善經常要求存取相片和影片存取權的應用程式使用者體驗。如要在應用程式中使用這項功能，請啟用查詢 MediaStore 時有 QUERY_ARG_LATEST_SELECTION_ONLY 引數透過 ContentResolver 關閉通知。

Kotlin

val externalContentUri = MediaStore.Files.getContentUri("external")

val mediaColumns = arrayOf(
   FileColumns._ID,
   FileColumns.DISPLAY_NAME,
   FileColumns.MIME_TYPE,
)

val queryArgs = bundleOf(
   // Return only items from the last selection (selected photos access)
   QUERY_ARG_LATEST_SELECTION_ONLY to true,
   // Sort returned items chronologically based on when they were added to the device's storage
   QUERY_ARG_SQL_SORT_ORDER to "${FileColumns.DATE_ADDED} DESC",
   QUERY_ARG_SQL_SELECTION to "${FileColumns.MEDIA_TYPE} = ? OR ${FileColumns.MEDIA_TYPE} = ?",
   QUERY_ARG_SQL_SELECTION_ARGS to arrayOf(
       FileColumns.MEDIA_TYPE_IMAGE.toString(),
       FileColumns.MEDIA_TYPE_VIDEO.toString()
   )
)

Java

Uri externalContentUri = MediaStore.Files.getContentUri("external");

String[] mediaColumns = {
    FileColumns._ID,
    FileColumns.DISPLAY_NAME,
    FileColumns.MIME_TYPE
};

Bundle queryArgs = new Bundle();
queryArgs.putBoolean(MediaStore.QUERY_ARG_LATEST_SELECTION_ONLY, true);
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SORT_ORDER, FileColumns.DATE_ADDED + " DESC");
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SELECTION, FileColumns.MEDIA_TYPE + " = ? OR " + FileColumns.MEDIA_TYPE + " = ?");
queryArgs.putStringArray(MediaStore.QUERY_ARG_SQL_SELECTION_ARGS, new String[] {
    String.valueOf(FileColumns.MEDIA_TYPE_IMAGE),
    String.valueOf(FileColumns.MEDIA_TYPE_VIDEO)
});

Android 版 Privacy Sandbox

Android 15 包含最新的 Android 广告服务扩展，其中包含最新版本的 Privacy Sandbox on Android。我们一直致力于开发可更好地保护用户隐私，并为移动应用打造高效的个性化广告体验的技术，此次添加新功能就是其中的一项举措。我们的 Privacy Sandbox 页面详细介绍了 Privacy Sandbox on Android 开发者预览版和 Beta 版计划，可帮助您上手使用。

健康資料同步

Android 15 integrates the latest extensions around Health Connect by Android, a secure and centralized platform to manage and share app-collected health and fitness data. This update adds support for additional data types across fitness, nutrition, skin temperature, training plans, and more.

Skin temperature tracking allows users to store and share more accurate temperature data from a wearable or other tracking device.

Training plans are structured workout plans to help a user achieve their fitness goals. Training plans support includes a variety of completion and performance goals:

Completion goals around calories burned, distance, duration, repetition, and steps.
Performance goals around as many repetitions as possible (AMRAP), cadence, heart rate, power, perceived rate of exertion, and speed.

Learn more about the latest updates to Health Connect in Android in the Building adaptable experiences with Android Health talk from Google I/O.

Android 15 supports app screen sharing so users can share or record just an app window rather than the entire device screen. This feature, first enabled in Android 14 QPR2, includes MediaProjection callbacks that allow your app to customize the app screen sharing experience. Note that for apps targeting Android 14 (API level 34) or higher, user consent is required for each MediaProjection capture session.

使用者體驗和系統 UI

Android 15 讓應用程式開發人員和使用者能更靈活地控管裝置設定，滿足自身需求。

如要進一步瞭解如何運用 Android 15 的最新改良功能，提升應用程式的使用者體驗，請觀看 Google I/O 講座「改善 Android 應用程式的使用者體驗」。

使用 Generated Previews API 建立更豐富的小工具預覽畫面

Before Android 15, the only way to provide widget picker previews was to specify a static image or layout resource. These previews often differ significantly from the look of the actual widget when it is placed on the home screen. Also, static resources can't be created with Jetpack Glance, so a Glance developer had to screenshot their widget or create an XML layout to have a widget preview.

Android 15 adds support for generated previews. This means that app widget providers can generate RemoteViews to use as the picker preview, instead of a static resource.

Apps can provide Remote Views to the Widget Picker, so they can update the content in the picker to be more representative of what the user will see.

Push API

Apps can provide generated previews through a push API. Apps can provide previews at any point in their lifecycle, and don't receive an explicit request from the host to provide previews. Previews are persisted in AppWidgetService, and hosts can request them on-demand. The following example loads an XML widget layout resource and sets it as the preview:

AppWidgetManager.getInstance(appContext).setWidgetPreview(
   ComponentName(
       appContext,
       SociaLiteAppWidgetReceiver::class.java
   ),
   AppWidgetProviderInfo.WIDGET_CATEGORY_HOME_SCREEN,
   RemoteViews("com.example", R.layout.widget_preview)
)

The expected flow is:

At any time, the widget provider calls setWidgetPreview. The provided previews are persisted in AppWidgetService with other provider info.
setWidgetPreview notifies hosts of an updated preview through the AppWidgetHost.onProvidersChanged callback. In response, the widget host reloads all of its provider information.
When displaying a widget preview, the host checks AppWidgetProviderInfo.generatedPreviewCategories, and if the chosen category is available, calls AppWidgetManager.getWidgetPreview to return the saved preview for this provider.

When to call `setWidgetPreview`

Because there is no callback to provide previews, apps can choose to send previews at any point when they are running. How often to update the preview depends on the widget's use case.

The following list describes the two main categories of preview use cases:

Providers that show real data in their widget previews, such as personalized or recent information. These providers can set the preview once the user has signed in or has done initial configuration in their app. After this, they can set up a periodic task to update the previews at their chosen cadence. Examples of this type of widget could be a photo, calendar, weather or news widget.
Providers that show static information in previews or quick-action widgets that don't display any data. These providers can set previews once, when the app first launches. Examples of this type of widget include a drive quick actions widget or chrome shortcuts widget.

Some providers might show static previews on the hub mode picker, but real information on the homescreen picker. These providers should follow the guidance for both of these use cases to set previews.

子母畫面

Android 15 introduces changes in Picture-in-Picture (PiP) ensuring an even smoother transition when entering into PiP mode. This will be beneficial for apps having UI elements overlaid on top of their main UI, which goes into PiP.

Developers use the onPictureInPictureModeChanged callback to define logic that toggles the visibility of the overlaid UI elements. This callback is triggered when the PiP enter or exit animation is completed. Beginning in Android 15, the PictureInPictureUiState class includes another state.

With this UI state, apps targeting Android 15 (API level 35) will observe the Activity#onPictureInPictureUiStateChanged callback being invoked with isTransitioningToPip() as soon as the PiP animation starts. There are many UI elements that are not relevant for the app when it is in PiP mode, for example views or layout that include information such as suggestions, upcoming video, ratings, and titles. When the app goes to PiP mode, use the onPictureInPictureUiStateChanged callback to hide these UI elements. When the app goes to full screen mode from the PiP window, use onPictureInPictureModeChanged callback to unhide these elements, as shown in the following examples:

override fun onPictureInPictureUiStateChanged(pipState: PictureInPictureUiState) {
        if (pipState.isTransitioningToPip()) {
          // Hide UI elements
        }
    }

override fun onPictureInPictureModeChanged(isInPictureInPictureMode: Boolean) {
        if (isInPictureInPictureMode) {
          // Unhide UI elements
        }
    }

This quick visibility toggle of irrelevant UI elements (for a PiP window) helps ensure a smoother and flicker-free PiP enter animation.

改善「零打擾」規則

AutomaticZenRule 允许应用自定义注意力机制管理（勿扰）规则，并确定何时启用或停用。Android 15 极大地增强了这些规则，旨在提高用户体验。其中包含以下增强功能：

向 AutomaticZenRule 添加类型，让系统能够应用特殊类型对某些规则的处理
向 AutomaticZenRule 添加图标，使模式更加丰富易于识别。
将 triggerDescription 字符串添加到 AutomaticZenRule，用于描述规则应当对用户生效的条件。
已添加 ZenDeviceEffects 更改为AutomaticZenRule，从而允许规则触发灰度等操作显示、夜间模式或调暗壁纸。

為通知管道設定 VibrationEffect

Android 15 supports setting rich vibrations for incoming notifications by channel using NotificationChannel.setVibrationEffect, so your users can distinguish between different types of notifications without having to look at their device.

媒體投影狀態列方塊和自動停止

媒体投放可能会泄露用户的私密信息。一个醒目的新状态栏条状标签可让用户了解任何正在进行的屏幕投影。用户可以点按该条状标签停止投屏、共享或录制屏幕。此外，为了提供更直观的用户体验，当设备屏幕锁定后，所有正在进行的屏幕投影都会自动停止。

大型螢幕和板型規格

Android 15 支援應用程式充分運用 Android 的板型規格，包括大螢幕、折疊式和摺疊式裝置。

改善大螢幕多工處理

Android 15 为用户提供了在大屏设备上更好地进行多任务处理的方式。对于例如，用户可以保存自己喜爱的分屏应用组合，访问并固定屏幕上的任务栏，以便在应用之间快速切换。这意味着让应用具备自适应能力比以往任何时候都更加重要。

Google I/O 大会上有一些关于构建自适应 Android 的会议应用和使用 Material 3 构建界面自适应库我们的文档中提供了更多帮助信息，帮助您针对大型语言。

支援封面螢幕

您的应用可以声明一个属性，Android 15 会使用该属性来允许您的 Application 或 Activity 显示在受支持的可翻转设备的小封面屏幕上。这些屏幕太小，无法被视为适合运行 Android 应用的兼容目标平台，但您的应用可以选择支持它们，从而让您的应用在更多平台上可用。

連線能力

Android 15 更新平台，讓應用程式能使用通訊和無線技術的最新進展。

衛星支援

Android 15 continues to extend platform support for satellite connectivity and includes some UI elements to ensure a consistent user experience across the satellite connectivity landscape.

Apps can use ServiceState.isUsingNonTerrestrialNetwork() to detect when a device is connected to a satellite, giving them more awareness of why full network services might be unavailable. Additionally, Android 15 provides support for SMS and MMS apps as well as preloaded RCS apps to use satellite connectivity for sending and receiving messages.

A notification appears when the device connects to a satellite.

更流暢的 NFC 體驗

Android 15 is working to make the tap to pay experience more seamless and reliable while continuing to support Android's robust NFC app ecosystem. On supported devices, apps can request the NfcAdapter to enter observe mode, where the device listens but doesn't respond to NFC readers, sending the app's NFC service PollingFrame objects to process. The PollingFrame objects can be used to auth ahead of the first communication to the NFC reader, allowing for a one tap transaction in many cases.

In addition, apps can register a filter on supported devices so they can be notified of polling loop activity, which allows for smooth operation with multiple NFC-aware applications.

錢包角色

Android 15 introduces a Wallet role that allows tighter integration with the user's preferred wallet app. This role replaces the NFC default contactless payment setting. Users can manage the Wallet role holder by navigating to Settings > Apps > Default Apps.

The Wallet role is used when routing NFC taps for AIDs registered in the payment category. Taps always go to the Wallet role holder unless another app that is registered for the same AID is running in the foreground.

This role is also used to determine where the Wallet Quick Access tile should go when activated. When the role is set to "None", the Quick Access tile isn't available and payment category NFC taps are only delivered to the foreground app.

安全性

Android 15 可協助您強化應用程式安全性、保護應用程式資料，並讓使用者更清楚瞭解及控管自己的資料。請觀看 Google I/O 的「Safeguarding user security on Android」(保護 Android 使用者安全) 演講，進一步瞭解我們如何改善使用者保護措施，並保護應用程式免受新威脅。

整合 Credential Manager 與自動填入功能

Starting with Android 15, developers can link specific views like username or password fields with Credential Manager requests, making it easier to provide a tailored user experience during the sign-in process. When the user focuses on one of these views, a corresponding request is sent to Credential Manager. The resulting credentials are aggregated across providers and displayed in autofill fallback UIs, such as inline suggestions or drop-down suggestions. The Jetpack androidx.credentials library is the preferred endpoint for developers to use and will soon be available to further enhance this feature in Android 15 and higher.

整合單鍵註冊和登入功能與生物特徵辨識提示

Credential Manager 會將生物特徵辨識提示訊息整合至憑證建立和登入程序，因此提供者不必管理生物特徵辨識提示訊息。因此，憑證提供者只需要專注於建立和取得流量的結果，並透過生物特徵辨識流程結果增強。這個簡化程序可建立更有效率且精簡的憑證建立和擷取程序。

端對端加密的金鑰管理

我們在 Android 15 中推出 E2eeContactKeysManager，這項功能可提供 OS 層級 API 來儲存加密編譯公用金鑰，方便在 Android 應用程式中進行端對端加密 (E2EE)。

E2eeContactKeysManager 旨在整合平台聯絡人應用程式，為使用者提供集中式方式，管理及驗證聯絡人的公開金鑰。

內容 URI 的權限檢查

Android 15 introduces a set of APIs that perform permission checks on content URIs:

Context.checkContentUriPermissionFull: This performs a full permission check on content URIs.
Activity manifest attribute requireContentUriPermissionFromCaller: This enforces specified permissions on the provided content URIs at activity launch.
ComponentCaller class for Activity callers: This represents the app that launched the activity.

無障礙設定

Android 15 新增了多項功能，可提升使用者的無障礙體驗。

更優質的點字體驗

在 Android 15 中，我們讓 TalkBack 支援透過 USB 和安全藍牙使用 HID 標準的點字顯示器。

這個標準與滑鼠和鍵盤使用的標準類似，可協助 Android 隨著時間支援更多種類的點字顯示器。

國際化

Android 15 新增多項功能，可在裝置使用不同語言時，提供更完善的使用者體驗。

CJK 變數字型

从 Android 15 开始，面向中文、日文和韩文 (CJK) 语言的字体文件 NotoSansCJK 现在是可变字体。可变字体为中日韩语言的创意排版提供了更多可能性。设计师可以探索更多样式的排版，并制作出以前难以实现或根本无法实现的视觉效果出色的布局。

字元間距齊行

Starting with Android 15, text can be justified utilizing letter spacing by using JUSTIFICATION_MODE_INTER_CHARACTER. Inter-word justification was first introduced in Android 8.0 (API level 26), and inter-character justification provides similar capabilities for languages that use the whitespace character for segmentation, such as Chinese, Japanese, and others.

Layout for Japanese text using JUSTIFICATION_MODE_NONE.

Layout for English text using JUSTIFICATION_MODE_NONE.

Layout for Japanese text using JUSTIFICATION_MODE_INTER_WORD.

Layout for English text using JUSTIFICATION_MODE_INTER_WORD.

Layout for Japanese text using the JUSTIFICATION_MODE_INTER_CHARACTER.

Layout for English text using the JUSTIFICATION_MODE_INTER_CHARACTER.

自動換行設定

Android started supporting phrase-based line breaks for Japanese and Korean in Android 13 (API level 33). However, while phrase-based line breaks improve the readability of short lines of text, they don't work well for long lines of text. In Android 15, apps can apply phrase-based line breaks only for short lines of text, using the LINE_BREAK_WORD_STYLE_AUTO option. This option selects the best word style option for the text.

For short lines of text, phrase-based line breaks are used, functioning the same as LINE_BREAK_WORD_STYLE_PHRASE, as shown in the following image:

For short lines of text, `LINE_BREAK_WORD_STYLE_AUTO` applies phrase-based line breaks to improve the readability of the text. This is the same as applying `LINE_BREAK_WORD_STYLE_PHRASE`.

For longer lines of text, LINE_BREAK_WORD_STYLE_AUTO uses a no line-break word style, functioning the same as LINE_BREAK_WORD_STYLE_NONE, as shown in the following image:

For long lines of text, `LINE_BREAK_WORD_STYLE_AUTO` applies no line-break word style to improve the readability of the text. This is the same as applying `LINE_BREAK_WORD_STYLE_NONE`.

其他日文變體假名字型

在 Android 15 中，旧版日语平假名（也称为 Hentaigana）字体文件捆绑在一起半形人物的独特形状可以增加风格或设计独特的风格传播和理解古代日本文件的能力。

VideoLAN cone Copyright (c) 1996-2010 VideoLAN. This logo or a modified version may be used or modified by anyone to refer to the VideoLAN project or any product developed by the VideoLAN team, but does not indicate endorsement by the project.

Vulkan and the Vulkan logo are registered trademarks of the Khronos Group Inc.

OpenGL is a registered trademark and the OpenGL ES logo is a trademark of Hewlett Packard Enterprise used by permission by Khronos.

功能與 API 總覽 透過集合功能整理內容 你可以依據偏好儲存及分類內容。

相機與媒體

低光源增強

應用程式內相機控制項

HDR 餘裕控制

音量控制

虛擬 MIDI 2.0 裝置

更有效率的 AV1 軟體解碼

開發人員工作效率和工具

OpenJDK 17 更新

PDF 改善項目

自動切換語言功能更臻完善

改良 OpenType Variable Font API

Kotlin

Java

Kotlin

Java

精細的換行控制項

應用程式封存

使用開發人員選項在裝置上啟用 16 KB 模式

圖形

現代化 Android 的 GPU 存取權

The Android ANGLE on Vulkan roadmap

Recommended next steps

Canvas 改善項目

效能和電池

ApplicationStartInfo API

詳細的應用程式大小資訊

應用程式管理的分析

SQLite 資料庫改善項目

Android 動態效能框架更新

隱私權

螢幕錄影偵測

擴充 IntentFilter 功能

私人空間

查詢使用者最近選取的相片存取權

Kotlin

Java

Android 版 Privacy Sandbox

健康資料同步

應用程式分享螢幕畫面

使用者體驗和系統 UI

使用 Generated Previews API 建立更豐富的小工具預覽畫面

Push API

When to call setWidgetPreview

子母畫面

改善「零打擾」規則

為通知管道設定 VibrationEffect

媒體投影狀態列方塊和自動停止

大型螢幕和板型規格

改善大螢幕多工處理

支援封面螢幕

連線能力

衛星支援

更流暢的 NFC 體驗

錢包角色

安全性

整合 Credential Manager 與自動填入功能

整合單鍵註冊和登入功能與生物特徵辨識提示

端對端加密的金鑰管理

內容 URI 的權限檢查

無障礙設定

更優質的點字體驗

國際化

CJK 變數字型

字元間距齊行

自動換行設定

其他日文變體假名字型

功能與 API 總覽

When to call `setWidgetPreview`