CamcorderProfile

QUALITY_1080P

static val QUALITY_1080P: Int

Quality level corresponding to the 1080p (1920 x 1080) resolution. Note that the vertical resolution for 1080p can also be 1088, instead of 1080 (used by some vendors to avoid cropping during video playback).

Value: 6

QUALITY_2160P

static val QUALITY_2160P: Int

Quality level corresponding to the 2160p (3840x2160) resolution.

Value: 8

QUALITY_2K

static val QUALITY_2K: Int

Quality level corresponding to 2K (2048 x 1080) resolution

Value: 12

QUALITY_480P

static val QUALITY_480P: Int

Quality level corresponding to the 480p (720 x 480) resolution. Note that the horizontal resolution for 480p can also be other values, such as 640 or 704, instead of 720.

Value: 4

QUALITY_4KDCI

static val QUALITY_4KDCI: Int

Quality level corresponding to 4k-DCI (4096 x 2160) resolution.

Value: 10

QUALITY_720P

static val QUALITY_720P: Int

Quality level corresponding to the 720p (1280 x 720) resolution.

Value: 5

QUALITY_8KUHD

static val QUALITY_8KUHD: Int

Quality level corresponding to 8K UHD (7680 x 4320) resolution

Value: 13

QUALITY_CIF

static val QUALITY_CIF: Int

Quality level corresponding to the cif (352 x 288) resolution.

Value: 3

QUALITY_HIGH

static val QUALITY_HIGH: Int

Quality level corresponding to the highest available resolution.

Value: 1

QUALITY_HIGH_SPEED_1080P

static val QUALITY_HIGH_SPEED_1080P: Int

High speed ( >= 100fps) quality level corresponding to the 1080p (1920 x 1080 or 1920x1088) resolution.

Value: 2004

QUALITY_HIGH_SPEED_2160P

static val QUALITY_HIGH_SPEED_2160P: Int

High speed ( >= 100fps) quality level corresponding to the 2160p (3840 x 2160) resolution.

Value: 2005

QUALITY_HIGH_SPEED_480P

static val QUALITY_HIGH_SPEED_480P: Int

High speed ( >= 100fps) quality level corresponding to the 480p (720 x 480) resolution. Note that the horizontal resolution for 480p can also be other values, such as 640 or 704, instead of 720.

Value: 2002

QUALITY_HIGH_SPEED_4KDCI

static val QUALITY_HIGH_SPEED_4KDCI: Int

High speed ( >= 100fps) quality level corresponding to the 4K-DCI (4096 x 2160)

Value: 2008

QUALITY_HIGH_SPEED_720P

static val QUALITY_HIGH_SPEED_720P: Int

High speed ( >= 100fps) quality level corresponding to the 720p (1280 x 720) resolution.

Value: 2003

QUALITY_HIGH_SPEED_CIF

static val QUALITY_HIGH_SPEED_CIF: Int

High speed ( >= 100fps) quality level corresponding to the CIF (352 x 288)

Value: 2006

QUALITY_HIGH_SPEED_HIGH

static val QUALITY_HIGH_SPEED_HIGH: Int

High speed ( >= 100fps) quality level corresponding to the highest available resolution.

Value: 2001

QUALITY_HIGH_SPEED_LOW

static val QUALITY_HIGH_SPEED_LOW: Int

High speed ( >= 100fps) quality level corresponding to the lowest available resolution.

For all the high speed profiles defined below ((from QUALITY_HIGH_SPEED_LOW to QUALITY_HIGH_SPEED_2160P), they are similar as normal recording profiles, with just higher output frame rate and bit rate. Therefore, setting these profiles with MediaRecorder.setProfile without specifying any other encoding parameters will produce high speed videos rather than slow motion videos that have different capture and output (playback) frame rates. To record slow motion videos, the application must set video output (playback) frame rate and bit rate appropriately via MediaRecorder.setVideoFrameRate and MediaRecorder.setVideoEncodingBitRate based on the slow motion factor. If the application intends to do the video recording with MediaCodec encoder, it must set each individual field of MediaFormat similarly according to this CamcorderProfile.

Value: 2000

QUALITY_HIGH_SPEED_VGA

static val QUALITY_HIGH_SPEED_VGA: Int

High speed ( >= 100fps) quality level corresponding to the VGA (640 x 480)

Value: 2007

QUALITY_LOW

static val QUALITY_LOW: Int

Quality level corresponding to the lowest available resolution.

Value: 0

QUALITY_QCIF

static val QUALITY_QCIF: Int

Quality level corresponding to the qcif (176 x 144) resolution.

Value: 2

QUALITY_QHD

static val QUALITY_QHD: Int

Quality level corresponding to QHD (2560 x 1440) resolution

Value: 11

QUALITY_QVGA

static val QUALITY_QVGA: Int

Quality level corresponding to the QVGA (320x240) resolution.

Value: 7

QUALITY_TIME_LAPSE_1080P

static val QUALITY_TIME_LAPSE_1080P: Int

Time lapse quality level corresponding to the 1080p (1920 x 1088) resolution.

Value: 1006

QUALITY_TIME_LAPSE_2160P

static val QUALITY_TIME_LAPSE_2160P: Int

Time lapse quality level corresponding to the 2160p (3840 x 2160) resolution.

Value: 1008

QUALITY_TIME_LAPSE_2K

static val QUALITY_TIME_LAPSE_2K: Int

Time lapse quality level corresponding to the 2K (2048 x 1080) resolution.

Value: 1012

QUALITY_TIME_LAPSE_480P

static val QUALITY_TIME_LAPSE_480P: Int

Time lapse quality level corresponding to the 480p (720 x 480) resolution.

Value: 1004

QUALITY_TIME_LAPSE_4KDCI

static val QUALITY_TIME_LAPSE_4KDCI: Int

Time lapse quality level corresponding to the 4k-DCI (4096 x 2160) resolution.

Value: 1010

QUALITY_TIME_LAPSE_720P

static val QUALITY_TIME_LAPSE_720P: Int

Time lapse quality level corresponding to the 720p (1280 x 720) resolution.

Value: 1005

QUALITY_TIME_LAPSE_8KUHD

static val QUALITY_TIME_LAPSE_8KUHD: Int

Time lapse quality level corresponding to the 8K UHD (7680 x 4320) resolution.

Value: 1013

QUALITY_TIME_LAPSE_CIF

static val QUALITY_TIME_LAPSE_CIF: Int

Time lapse quality level corresponding to the cif (352 x 288) resolution.

Value: 1003

QUALITY_TIME_LAPSE_HIGH

static val QUALITY_TIME_LAPSE_HIGH: Int

Time lapse quality level corresponding to the highest available resolution.

Value: 1001

QUALITY_TIME_LAPSE_LOW

static val QUALITY_TIME_LAPSE_LOW: Int

Time lapse quality level corresponding to the lowest available resolution.

Value: 1000

QUALITY_TIME_LAPSE_QCIF

static val QUALITY_TIME_LAPSE_QCIF: Int

Time lapse quality level corresponding to the qcif (176 x 144) resolution.

Value: 1002

QUALITY_TIME_LAPSE_QHD

static val QUALITY_TIME_LAPSE_QHD: Int

Time lapse quality level corresponding to the QHD (2560 x 1440) resolution.

Value: 1011

QUALITY_TIME_LAPSE_QVGA

static val QUALITY_TIME_LAPSE_QVGA: Int

Time lapse quality level corresponding to the QVGA (320 x 240) resolution.

Value: 1007

QUALITY_TIME_LAPSE_VGA

static val QUALITY_TIME_LAPSE_VGA: Int

Time lapse quality level corresponding to the VGA (640 x 480) resolution.

Value: 1009

QUALITY_VGA

static val QUALITY_VGA: Int

Quality level corresponding to the VGA (640 x 480) resolution.

Value: 9

get

open static fun get(quality: Int): CamcorderProfile!

Deprecated: Use getAll instead

Returns the default camcorder profile at the given quality level for the first back-facing camera on the device. If the device has no back-facing camera, this returns null.

get

open static fun get(
    cameraId: Int, 
    quality: Int
): CamcorderProfile!

Deprecated: Use getAll instead

Returns the default camcorder profile for the given camera at the given quality level. Quality levels QUALITY_LOW, QUALITY_HIGH are guaranteed to be supported, while other levels may or may not be supported. The supported levels can be checked using hasProfile(int,int). QUALITY_LOW refers to the lowest quality available, while QUALITY_HIGH refers to the highest quality available. QUALITY_LOW/QUALITY_HIGH have to match one of qcif, cif, 480p, 720p, 1080p or 2160p. E.g. if the device supports 480p, 720p, 1080p and 2160p, then low is 480p and high is 2160p. The same is true for time lapse quality levels, i.e. QUALITY_TIME_LAPSE_LOW, QUALITY_TIME_LAPSE_HIGH are guaranteed to be supported and have to match one of qcif, cif, 480p, 720p, 1080p, or 2160p. For high speed quality levels, they may or may not be supported. If a subset of the levels are supported, QUALITY_HIGH_SPEED_LOW and QUALITY_HIGH_SPEED_HIGH are guaranteed to be supported and have to match one of 480p, 720p, or 1080p. A camcorder recording session with higher quality level usually has higher output bit rate, better video and/or audio recording quality, larger video frame resolution and higher audio sampling rate, etc, than those with lower quality level.

getAll

open static fun getAll(
    cameraId: String, 
    quality: Int
): EncoderProfiles?

Returns all encoder profiles of a camcorder profile for the given camera at the given quality level.

Quality levels QUALITY_LOW, QUALITY_HIGH are guaranteed to be supported, while other levels may or may not be supported. The supported levels can be checked using hasProfile(int,int). QUALITY_LOW refers to the lowest quality available, while QUALITY_HIGH refers to the highest quality available. QUALITY_LOW/QUALITY_HIGH have to match one of qcif, cif, 480p, 720p, 1080p or 2160p. E.g. if the device supports 480p, 720p, 1080p and 2160p, then low is 480p and high is 2160p.

The same is true for time lapse quality levels, i.e. QUALITY_TIME_LAPSE_LOW, QUALITY_TIME_LAPSE_HIGH are guaranteed to be supported and have to match one of qcif, cif, 480p, 720p, 1080p, or 2160p.

For high speed quality levels, they may or may not be supported. If a subset of the levels are supported, QUALITY_HIGH_SPEED_LOW and QUALITY_HIGH_SPEED_HIGH are guaranteed to be supported and have to match one of 480p, 720p, or 1080p.

A camcorder recording session with higher quality level usually has higher output bit rate, better video and/or audio recording quality, larger video frame resolution and higher audio sampling rate, etc, than those with lower quality level.

Note: as of Android TIRAMISU, this method can return advanced encoder profiles.

Apps targeting Build.VERSION_CODES.S_V2 or before will only receive basic video encoder profiles that use output YUV 4:2:0 8-bit content. Apps targeting Build.VERSION_CODES.TIRAMISU or above will also receive advanced video encoder profiles that may output 10-bit, YUV 4:2:2/4:4:4 or HDR content.

hasProfile

open static fun hasProfile(quality: Int): Boolean

Returns true if a camcorder profile exists for the first back-facing camera at the given quality level.

When using the Camera 2 API in LEGACY mode (i.e. when android.hardware.camera2.CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL is set to android.hardware.camera2.CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY), #hasProfile may return true for unsupported resolutions. To ensure a a given resolution is supported in LEGACY mode, the configuration given in android.hardware.camera2.CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP must contain the the resolution in the supported output sizes. The recommended way to check this is with android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes(Class) with the class of the desired recording endpoint, and check that the desired resolution is contained in the list returned.

hasProfile

open static fun hasProfile(
    cameraId: Int, 
    quality: Int
): Boolean

Returns true if a camcorder profile exists for the given camera at the given quality level.

When using the Camera 2 API in LEGACY mode (i.e. when android.hardware.camera2.CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL is set to android.hardware.camera2.CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY), #hasProfile may return true for unsupported resolutions. To ensure a a given resolution is supported in LEGACY mode, the configuration given in android.hardware.camera2.CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP must contain the the resolution in the supported output sizes. The recommended way to check this is with android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes(Class) with the class of the desired recording endpoint, and check that the desired resolution is contained in the list returned.

audioBitRate

var audioBitRate: Int

The target audio output bit rate in bits per second

audioChannels

var audioChannels: Int

The number of audio channels used for the audio track

audioCodec

var audioCodec: Int

The audio encoder being used for the audio track.

audioSampleRate

var audioSampleRate: Int

The audio sampling rate used for the audio track

duration

var duration: Int

Default recording duration in seconds before the session is terminated. This is useful for applications like MMS has limited file size requirement.

fileFormat

var fileFormat: Int

The file output format of the camcorder profile

quality

var quality: Int

The quality level of the camcorder profile

videoBitRate

var videoBitRate: Int

The target video output bit rate in bits per second

This is the target recorded video output bit rate if the application configures the video recording via MediaRecorder.setProfile without specifying any other MediaRecorder encoding parameters. For example, for high speed quality profiles (from QUALITY_HIGH_SPEED_LOW to QUALITY_HIGH_SPEED_2160P), this is the bit rate where the video is recorded with. If the application intends to record slow motion videos with the high speed quality profiles, it must set a different video bit rate that is corresponding to the desired recording output bit rate (i.e., the encoded video bit rate during normal playback) via MediaRecorder.setVideoEncodingBitRate. For example, if QUALITY_HIGH_SPEED_720P advertises 240fps videoFrameRate and 64Mbps videoBitRate in the high speed CamcorderProfile, and the application intends to record 1/8 factor slow motion recording videos, the application must set 30fps via MediaRecorder.setVideoFrameRate and 8Mbps ( videoBitRate * slow motion factor) via MediaRecorder.setVideoEncodingBitRate. Failing to do so will result in videos with unexpected frame rate and bit rate, or MediaRecorder error if the output bit rate exceeds the encoder limit. If the application intends to do the video recording with MediaCodec encoder, it must set each individual field of MediaFormat similarly according to this CamcorderProfile.

videoCodec

var videoCodec: Int

The video encoder being used for the video track

videoFrameHeight

var videoFrameHeight: Int

The target video frame height in pixels

videoFrameRate

var videoFrameRate: Int

The target video frame rate in frames per second.

This is the target recorded video output frame rate per second if the application configures the video recording via MediaRecorder.setProfile without specifying any other MediaRecorder encoding parameters. For example, for high speed quality profiles (from QUALITY_HIGH_SPEED_LOW to QUALITY_HIGH_SPEED_2160P), this is the frame rate where the video is recorded and played back with. If the application intends to create slow motion use case with the high speed quality profiles, it must set a different video frame rate that is corresponding to the desired output (playback) frame rate via MediaRecorder.setVideoFrameRate. For example, if QUALITY_HIGH_SPEED_720P advertises 240fps videoFrameRate in the CamcorderProfile, and the application intends to create 1/8 factor slow motion recording videos, the application must set 30fps via MediaRecorder.setVideoFrameRate. Failing to do so will result in high speed videos with normal speed playback frame rate (240fps for above example). If the application intends to do the video recording with MediaCodec encoder, it must set each individual field of MediaFormat similarly according to this CamcorderProfile.

videoFrameWidth

var videoFrameWidth: Int

The target video frame width in pixels