Added in API level 1

TextUtils


open class TextUtils
kotlin.Any
   ↳ android.text.TextUtils

Summary

Nested classes
abstract

open

A simple string splitter.

abstract

An interface for splitting strings according to rules that are opaque to the user of this interface.

Constants
static Int

Capitalization mode for getCapsMode: capitalize all characters.

static Int

Capitalization mode for getCapsMode: capitalize the first character of each sentence.

static Int

Capitalization mode for getCapsMode: capitalize the first character of all words.

static Int

Return only first line of text (truncate at first newline).

static Int

Force entire string into single line of text (no newlines).

static Int

Remove whitespace and non-breaking spaces from the edges of the label.

Public methods
open static CharSequence!
commaEllipsize(text: CharSequence!, p: TextPaint!, avail: Float, oneMore: String!, more: String!)

Converts a CharSequence of the comma-separated form "Andy, Bob, Charles, David" that is too wide to fit into the specified width into one like "Andy, Bob, 2 more".

open static CharSequence!
concat(vararg text: CharSequence!)

Returns a CharSequence concatenating the specified CharSequences, retaining their spans if any.

open static Unit
copySpansFrom(source: Spanned!, start: Int, end: Int, kind: Class<Any!>!, dest: Spannable!, destoff: Int)

Copies the spans from the region start...end in source to the region destoff...destoff+end-start in dest.

open static Unit
dumpSpans(cs: CharSequence!, printer: Printer!, prefix: String!)

Debugging tool to print the spans in a CharSequence.

open static CharSequence!
ellipsize(text: CharSequence!, p: TextPaint!, avail: Float, where: TextUtils.TruncateAt!)

Returns the original text if it fits in the specified width given the properties of the specified Paint, or, if it does not fit, a truncated copy with ellipsis character added at the specified edge or center.

open static CharSequence!
ellipsize(text: CharSequence!, paint: TextPaint!, avail: Float, where: TextUtils.TruncateAt!, preserveLength: Boolean, callback: TextUtils.EllipsizeCallback?)

Returns the original text if it fits in the specified width given the properties of the specified Paint, or, if it does not fit, a copy with ellipsis character added at the specified edge or center.

open static Boolean

Returns true if a and b are equal, including if they are both null.

open static CharSequence!
expandTemplate(template: CharSequence!, vararg values: CharSequence!)

Replace instances of "^1", "^2", etc.

open static Int
getCapsMode(cs: CharSequence!, off: Int, reqModes: Int)

Determine what caps mode should be in effect at the current offset in the text.

open static Unit
getChars(s: CharSequence!, start: Int, end: Int, dest: CharArray!, destoff: Int)

open static Int

Return the layout direction for a given Locale

open static Int
getOffsetAfter(text: CharSequence!, offset: Int)

open static Int
getOffsetBefore(text: CharSequence!, offset: Int)

open static CharSequence!
getReverse(source: CharSequence!, start: Int, end: Int)

This function only reverses individual chars and not their associated spans.

open static Int

Returns the length that the specified CharSequence would have if spaces and ASCII control characters were trimmed from the start and end, as by String#trim.

open static String!

Html-encode the string.

open static Int

open static Int
indexOf(s: CharSequence!, ch: Char, start: Int)

open static Int
indexOf(s: CharSequence!, ch: Char, start: Int, end: Int)

open static Int

open static Int
indexOf(s: CharSequence!, needle: CharSequence!, start: Int)

open static Int
indexOf(s: CharSequence!, needle: CharSequence!, start: Int, end: Int)

open static Boolean

Returns whether the given CharSequence contains only digits.

open static Boolean

Returns true if the string is null or 0-length.

open static Boolean

Returns whether the given CharSequence contains any printable characters.

open static Boolean

Returns whether this character is a printable character.

open static String!
join(delimiter: CharSequence, tokens: Array<Any!>)

Returns a string containing the tokens joined by delimiters.

open static String!
join(delimiter: CharSequence, tokens: MutableIterable<Any?>)

Returns a string containing the tokens joined by delimiters.

open static Int

open static Int
lastIndexOf(s: CharSequence!, ch: Char, last: Int)

open static Int
lastIndexOf(s: CharSequence!, ch: Char, start: Int, last: Int)

open static CharSequence!
listEllipsize(context: Context?, elements: MutableList<CharSequence!>?, separator: String, paint: TextPaint, avail: Float, moreId: Int)

Formats a list of CharSequences by repeatedly inserting the separator between them, but stopping when the resulting sequence is too wide for the specified width.

open static CharSequence
makeSafeForPresentation(unclean: String, maxCharactersToConsider: Int, ellipsizeDip: Float, flags: Int)

Remove html, remove bad characters, and truncate string.

open static Boolean
regionMatches(one: CharSequence!, toffset: Int, two: CharSequence!, ooffset: Int, len: Int)

open static CharSequence!
replace(template: CharSequence!, sources: Array<String!>!, destinations: Array<CharSequence!>!)

Return a new CharSequence in which each of the source strings is replaced by the corresponding element of the destinations.

open static Array<String!>!
split(text: String!, expression: String!)

This method yields the same result as text.split(expression, -1) except that if text.isEmpty() then this method returns an empty array whereas "".split(expression, -1) would have returned an array with a single "".

open static Array<String!>!
split(text: String!, pattern: Pattern!)

Splits a string on a pattern.

open static CharSequence!

open static String!
substring(source: CharSequence!, start: Int, end: Int)

Create a new String object containing the given range of characters from the source string.

open static Unit
writeToParcel(cs: CharSequence?, p: Parcel, parcelableFlags: Int)

Flatten a CharSequence and whatever styles can be copied across processes into the parcel.

Properties
static Parcelable.Creator<CharSequence!>!

Constants

CAP_MODE_CHARACTERS

Added in API level 3
static val CAP_MODE_CHARACTERS: Int

Capitalization mode for getCapsMode: capitalize all characters. This value is explicitly defined to be the same as InputType#TYPE_TEXT_FLAG_CAP_CHARACTERS.

Value: 4096

CAP_MODE_SENTENCES

Added in API level 3
static val CAP_MODE_SENTENCES: Int

Capitalization mode for getCapsMode: capitalize the first character of each sentence. This value is explicitly defined to be the same as InputType#TYPE_TEXT_FLAG_CAP_SENTENCES.

Value: 16384

CAP_MODE_WORDS

Added in API level 3
static val CAP_MODE_WORDS: Int

Capitalization mode for getCapsMode: capitalize the first character of all words. This value is explicitly defined to be the same as InputType#TYPE_TEXT_FLAG_CAP_WORDS.

Value: 8192

SAFE_STRING_FLAG_FIRST_LINE

Added in API level 29
static val SAFE_STRING_FLAG_FIRST_LINE: Int

Return only first line of text (truncate at first newline). Cannot be set at the same time as SAFE_STRING_FLAG_SINGLE_LINE.

Value: 4

SAFE_STRING_FLAG_SINGLE_LINE

Added in API level 29
static val SAFE_STRING_FLAG_SINGLE_LINE: Int

Force entire string into single line of text (no newlines). Cannot be set at the same time as SAFE_STRING_FLAG_FIRST_LINE.

Value: 2

SAFE_STRING_FLAG_TRIM

Added in API level 29
static val SAFE_STRING_FLAG_TRIM: Int

Remove whitespace and non-breaking spaces from the edges of the label.

Value: 1

Public methods

commaEllipsize

Added in API level 1
Deprecated in API level 26
open static fun commaEllipsize(
    text: CharSequence!,
    p: TextPaint!,
    avail: Float,
    oneMore: String!,
    more: String!
): CharSequence!

Deprecated: Do not use. This is not internationalized, and has known issues with right-to-left text, languages that have more than one plural form, languages that use a different character as a comma-like separator, etc. Use listEllipsize instead.

Converts a CharSequence of the comma-separated form "Andy, Bob, Charles, David" that is too wide to fit into the specified width into one like "Andy, Bob, 2 more".

Parameters
text CharSequence!: the text to truncate
p TextPaint!: the Paint with which to measure the text
avail Float: the horizontal width available for the text (in pixels)
oneMore String!: the string for "1 more" in the current locale
more String!: the string for "%d more" in the current locale

concat

Added in API level 1
open static fun concat(vararg text: CharSequence!): CharSequence!

Returns a CharSequence concatenating the specified CharSequences, retaining their spans if any. If there are no parameters, an empty string will be returned. If the number of parameters is exactly one, that parameter is returned as output, even if it is null. If the number of parameters is at least two, any null CharSequence among the parameters is treated as if it was the string "null". If there are paragraph spans in the source CharSequences that satisfy paragraph boundary requirements in the sources but would no longer satisfy them in the concatenated CharSequence, they may get extended in the resulting CharSequence or not retained.

copySpansFrom

Added in API level 1
open static fun copySpansFrom(
    source: Spanned!,
    start: Int,
    end: Int,
    kind: Class<Any!>!,
    dest: Spannable!,
    destoff: Int
): Unit

Copies the spans from the region start...end in source to the region destoff...destoff+end-start in dest. Spans in source that begin before start or end after end but overlap this range are trimmed as if they began at start or ended at end.

Exceptions
java.lang.IndexOutOfBoundsException if any of the copied spans are out of range in dest.

dumpSpans

Added in API level 3
open static fun dumpSpans(
    cs: CharSequence!,
    printer: Printer!,
    prefix: String!
): Unit

Debugging tool to print the spans in a CharSequence. The output will be printed one span per line. If the CharSequence is not a Spanned, then the entire string will be printed on a single line.

ellipsize

Added in API level 1
open static fun ellipsize(
    text: CharSequence!,
    p: TextPaint!,
    avail: Float,
    where: TextUtils.TruncateAt!
): CharSequence!

Returns the original text if it fits in the specified width given the properties of the specified Paint, or, if it does not fit, a truncated copy with ellipsis character added at the specified edge or center.

ellipsize

Added in API level 1
open static fun ellipsize(
    text: CharSequence!,
    paint: TextPaint!,
    avail: Float,
    where: TextUtils.TruncateAt!,
    preserveLength: Boolean,
    callback: TextUtils.EllipsizeCallback?
): CharSequence!

Returns the original text if it fits in the specified width given the properties of the specified Paint, or, if it does not fit, a copy with ellipsis character added at the specified edge or center. If preserveLength is specified, the returned copy will be padded with zero-width spaces to preserve the original length and offsets instead of truncating. If callback is non-null, it will be called to report the start and end of the ellipsized range. TextDirection is determined by the first strong directional character.

Parameters
callback TextUtils.EllipsizeCallback?: This value may be null.

equals

Added in API level 1
open static fun equals(
    a: CharSequence!,
    b: CharSequence!
): Boolean

Returns true if a and b are equal, including if they are both null.

Note: In platform versions 1.1 and earlier, this method only worked well if both the arguments were instances of String.

Parameters
a CharSequence!: first CharSequence to check
b CharSequence!: second CharSequence to check
Return
Boolean true if a and b are equal

expandTemplate

Added in API level 1
open static fun expandTemplate(
    template: CharSequence!,
    vararg values: CharSequence!
): CharSequence!

Replace instances of "^1", "^2", etc. in the template CharSequence with the corresponding values. "^^" is used to produce a single caret in the output. Only up to 9 replacement values are supported, "^10" will be produce the first replacement value followed by a '0'.

Parameters
template CharSequence!: the input text containing "^1"-style placeholder values. This object is not modified; a copy is returned.
values CharSequence!: CharSequences substituted into the template. The first is substituted for "^1", the second for "^2", and so on.
Return
CharSequence! the new CharSequence produced by doing the replacement
Exceptions
java.lang.IllegalArgumentException if the template requests a value that was not provided, or if more than 9 values are provided.

getCapsMode

Added in API level 3
open static fun getCapsMode(
    cs: CharSequence!,
    off: Int,
    reqModes: Int
): Int

Determine what caps mode should be in effect at the current offset in the text. Only the mode bits set in reqModes will be checked. Note that the caps mode flags here are explicitly defined to match those in InputType.

Parameters
cs CharSequence!: The text that should be checked for caps modes.
off Int: Location in the text at which to check.
reqModes Int: The modes to be checked: may be any combination of CAP_MODE_CHARACTERS, CAP_MODE_WORDS, and CAP_MODE_SENTENCES.
Return
Int Returns the actual capitalization modes that can be in effect at the current position, which is any combination of CAP_MODE_CHARACTERS, CAP_MODE_WORDS, and CAP_MODE_SENTENCES.

getChars

Added in API level 1
open static fun getChars(
    s: CharSequence!,
    start: Int,
    end: Int,
    dest: CharArray!,
    destoff: Int
): Unit

getLayoutDirectionFromLocale

Added in API level 17
open static fun getLayoutDirectionFromLocale(locale: Locale!): Int

Return the layout direction for a given Locale

Parameters
locale Locale!: the Locale for which we want the layout direction. Can be null.
Return
Int the layout direction. This may be one of: android.view.View#LAYOUT_DIRECTION_LTR or android.view.View#LAYOUT_DIRECTION_RTL. Be careful: this code will need to be updated when vertical scripts will be supported

getOffsetAfter

Added in API level 1
open static fun getOffsetAfter(
    text: CharSequence!,
    offset: Int
): Int

getOffsetBefore

Added in API level 1
open static fun getOffsetBefore(
    text: CharSequence!,
    offset: Int
): Int

getReverse

Added in API level 1
Deprecated in API level 24
open static fun getReverse(
    source: CharSequence!,
    start: Int,
    end: Int
): CharSequence!

Deprecated: Do not use.

This function only reverses individual chars and not their associated spans. It doesn't support surrogate pairs (that correspond to non-BMP code points), combining sequences or conjuncts either.

getTrimmedLength

Added in API level 1
open static fun getTrimmedLength(s: CharSequence!): Int

Returns the length that the specified CharSequence would have if spaces and ASCII control characters were trimmed from the start and end, as by String#trim.

htmlEncode

Added in API level 1
open static fun htmlEncode(s: String!): String!

Html-encode the string.

Parameters
s String!: the string to be encoded
Return
String! the encoded string

indexOf

Added in API level 1
open static fun indexOf(
    s: CharSequence!,
    ch: Char
): Int

indexOf

Added in API level 1
open static fun indexOf(
    s: CharSequence!,
    ch: Char,
    start: Int
): Int

indexOf

Added in API level 1
open static fun indexOf(
    s: CharSequence!,
    ch: Char,
    start: Int,
    end: Int
): Int

indexOf

Added in API level 1
open static fun indexOf(
    s: CharSequence!,
    needle: CharSequence!
): Int

indexOf

Added in API level 1
open static fun indexOf(
    s: CharSequence!,
    needle: CharSequence!,
    start: Int
): Int

indexOf

Added in API level 1
open static fun indexOf(
    s: CharSequence!,
    needle: CharSequence!,
    start: Int,
    end: Int
): Int

isDigitsOnly

Added in API level 1
open static fun isDigitsOnly(str: CharSequence!): Boolean

Returns whether the given CharSequence contains only digits.

isEmpty

Added in API level 1
open static fun isEmpty(str: CharSequence?): Boolean

Returns true if the string is null or 0-length.

Parameters
str CharSequence?: the string to be examined This value may be null.
Return
Boolean true if str is null or zero length

isGraphic

Added in API level 1
open static fun isGraphic(str: CharSequence!): Boolean

Returns whether the given CharSequence contains any printable characters.

isGraphic

Added in API level 1
Deprecated in API level 24
open static fun isGraphic(c: Char): Boolean

Deprecated: Use isGraphic(java.lang.CharSequence) instead.

Returns whether this character is a printable character. This does not support non-BMP characters and should not be used.

join

Added in API level 1
open static fun join(
    delimiter: CharSequence,
    tokens: Array<Any!>
): String!

Returns a string containing the tokens joined by delimiters.

Parameters
delimiter CharSequence: a CharSequence that will be inserted between the tokens. If null, the string "null" will be used as the delimiter.
tokens Array<Any!>: an array objects to be joined. Strings will be formed from the objects by calling object.toString(). If tokens is null, a NullPointerException will be thrown. If tokens is an empty array, an empty string will be returned.

join

Added in API level 1
open static fun join(
    delimiter: CharSequence,
    tokens: MutableIterable<Any?>
): String!

Returns a string containing the tokens joined by delimiters.

Parameters
delimiter CharSequence: a CharSequence that will be inserted between the tokens. If null, the string "null" will be used as the delimiter.
tokens MutableIterable<Any?>: an array objects to be joined. Strings will be formed from the objects by calling object.toString(). If tokens is null, a NullPointerException will be thrown. If tokens is empty, an empty string will be returned.

lastIndexOf

Added in API level 1
open static fun lastIndexOf(
    s: CharSequence!,
    ch: Char
): Int

lastIndexOf

Added in API level 1
open static fun lastIndexOf(
    s: CharSequence!,
    ch: Char,
    last: Int
): Int

lastIndexOf

Added in API level 1
open static fun lastIndexOf(
    s: CharSequence!,
    ch: Char,
    start: Int,
    last: Int
): Int

listEllipsize

Added in API level 26
open static fun listEllipsize(
    context: Context?,
    elements: MutableList<CharSequence!>?,
    separator: String,
    paint: TextPaint,
    avail: Float,
    moreId: Int
): CharSequence!

Formats a list of CharSequences by repeatedly inserting the separator between them, but stopping when the resulting sequence is too wide for the specified width. This method actually tries to fit the maximum number of elements. So if "A, 11 more" fits, "A, B, 10 more" doesn't fit, but "A, B, C, 9 more" fits again (due to the glyphs for the digits being very wide, for example), it returns "A, B, C, 9 more". Because of this, this method may be inefficient for very long lists. Note that the elements of the returned value, as well as the string for moreId, will be bidi-wrapped using android.text.BidiFormatter#unicodeWrap based on the locale of the input Context. If the input Context is null, the default BidiFormatter from BidiFormatter#getInstance() will be used.

Parameters
context Context?: the Context to get the moreId resource from. If null, an ellipsis (U+2026) would be used for moreId.
elements MutableList<CharSequence!>?: the list to format This value may be null.
separator String: a separator, such as ", " This value cannot be null.
paint TextPaint: the Paint with which to measure the text This value cannot be null.
avail Float: the horizontal width available for the text (in pixels) Value is 0.0 or greater
moreId Int: the resource ID for the pluralized string to insert at the end of sequence when some of the elements don't fit.
Return
CharSequence! the formatted CharSequence. If even the shortest sequence (e.g. "A, 11 more") doesn't fit, it will return an empty string.

makeSafeForPresentation

Added in API level 29
open static fun makeSafeForPresentation(
    unclean: String,
    maxCharactersToConsider: Int,
    ellipsizeDip: Float,
    flags: Int
): CharSequence

Remove html, remove bad characters, and truncate string.

This method is meant to remove common mistakes and nefarious formatting from strings that were loaded from untrusted sources (such as other packages).

This method first android.text.Html#fromHtml and then ...

  • Removes new lines or truncates at first new line
  • Trims the white-space off the end
  • Truncates the string
... if specified.
Parameters
unclean String: The input string This value cannot be null.
maxCharactersToConsider Int: The maximum number of characters of unclean to consider from the input string. 0 disables this feature. Value is 0 or greater
ellipsizeDip Float: Assuming maximum length of the string (in dip), assuming font size 42. This is roughly 50 characters for ellipsizeDip == 1000.
Usually ellipsizing should be left to the view showing the string. If a string is used as an input to another string, it might be useful to control the length of the input string though. 0 disables this feature. Value is 0 or greater
flags Int: Flags controlling cleaning behavior (Can be SAFE_STRING_FLAG_TRIM, SAFE_STRING_FLAG_SINGLE_LINE, and SAFE_STRING_FLAG_FIRST_LINE) Value is either 0 or a combination of android.text.TextUtils#SAFE_STRING_FLAG_TRIM, android.text.TextUtils#SAFE_STRING_FLAG_SINGLE_LINE, and android.text.TextUtils#SAFE_STRING_FLAG_FIRST_LINE
Return
CharSequence The cleaned string This value cannot be null.

regionMatches

Added in API level 1
open static fun regionMatches(
    one: CharSequence!,
    toffset: Int,
    two: CharSequence!,
    ooffset: Int,
    len: Int
): Boolean

replace

Added in API level 1
open static fun replace(
    template: CharSequence!,
    sources: Array<String!>!,
    destinations: Array<CharSequence!>!
): CharSequence!

Return a new CharSequence in which each of the source strings is replaced by the corresponding element of the destinations.

split

Added in API level 1
open static fun split(
    text: String!,
    expression: String!
): Array<String!>!

This method yields the same result as text.split(expression, -1) except that if text.isEmpty() then this method returns an empty array whereas "".split(expression, -1) would have returned an array with a single "". The -1 means that trailing empty Strings are not removed from the result; for example split("a,", "," ) returns {"a", ""}. Note that whether a leading zero-width match can result in a leading "" depends on whether your app targets an SDK version <= 28; see Pattern#split(CharSequence, int).

Parameters
text String!: the string to split
expression String!: the regular expression to match
Return
Array<String!>! an array of strings. The array will be empty if text is empty
Exceptions
java.lang.NullPointerException if expression or text is null

split

Added in API level 1
open static fun split(
    text: String!,
    pattern: Pattern!
): Array<String!>!

Splits a string on a pattern. This method yields the same result as pattern.split(text, -1) except that if text.isEmpty() then this method returns an empty array whereas pattern.split("", -1) would have returned an array with a single "". The -1 means that trailing empty Strings are not removed from the result; Note that whether a leading zero-width match can result in a leading "" depends on whether your app targets <= 28; see Pattern#split(CharSequence, int).

Parameters
text String!: the string to split
pattern Pattern!: the regular expression to match
Return
Array<String!>! an array of strings. The array will be empty if text is empty
Exceptions
java.lang.NullPointerException if expression or text is null

stringOrSpannedString

Added in API level 1
open static fun stringOrSpannedString(source: CharSequence!): CharSequence!

substring

Added in API level 1
open static fun substring(
    source: CharSequence!,
    start: Int,
    end: Int
): String!

Create a new String object containing the given range of characters from the source string. This is different than simply calling CharSequence.subSequence in that it does not preserve any style runs in the source sequence, allowing a more efficient implementation.

writeToParcel

Added in API level 1
open static fun writeToParcel(
    cs: CharSequence?,
    p: Parcel,
    parcelableFlags: Int
): Unit

Flatten a CharSequence and whatever styles can be copied across processes into the parcel.

Parameters
cs CharSequence?: This value may be null.
p Parcel: This value cannot be null.

Properties

CHAR_SEQUENCE_CREATOR

Added in API level 1
static val CHAR_SEQUENCE_CREATOR: Parcelable.Creator<CharSequence!>!