MockContext

MockContext

public MockContext ()

bindIsolatedService

public boolean bindIsolatedService (Intent service, 
                int flags, 
                String instanceName, 
                Executor executor, 
                ServiceConnection conn)

Variation of bindService(Intent, BindServiceFlags, Executor, ServiceConnection) that, in the specific case of isolated services, allows the caller to generate multiple instances of a service from a single component declaration. In other words, you can use this to bind to a service that has specified R.attr.isolatedProcess and, in addition to the existing behavior of running in an isolated process, you can also through the arguments here have the system bring up multiple concurrent processes hosting their own instances of that service. The instanceName you provide here identifies the different instances, and you can use updateServiceGroup(android.content.ServiceConnection, int, int) to tell the system how it should manage each of these instances.

bindService

public boolean bindService (Intent service, 
                int flags, 
                Executor executor, 
                ServiceConnection conn)

Same as bindService(Intent, ServiceConnection, int) with executor to control ServiceConnection callbacks.

This method only accepts a 32 bits flag, to pass in a 64 bits flag, call bindService(android.content.Intent, android.content.Context.BindServiceFlags, java.util.concurrent.Executor, android.content.ServiceConnection) instead.

bindService

public boolean bindService (Intent service, 
                ServiceConnection conn, 
                int flags)

Connects to an application service, creating it if needed. This defines a dependency between your application and the service. The given conn will receive the service object when it is created and be told if it dies and restarts. The service will be considered required by the system only for as long as the calling context exists. For example, if this Context is an Activity that is stopped, the service will not be required to continue running until the Activity is resumed.

If the service does not support binding, it may return null from its onBind() method. If it does, then the ServiceConnection's onNullBinding() method will be invoked instead of onServiceConnected().

Note: This method cannot be called from a BroadcastReceiver component. A pattern you can use to communicate from a BroadcastReceiver to a Service is to call startService(Intent) with the arguments containing the command to be sent, with the service calling its Service.stopSelf(int) method when done executing that command. See the API demo App/Service/Service Start Arguments Controller for an illustration of this. It is okay, however, to use this method from a BroadcastReceiver that has been registered with registerReceiver(BroadcastReceiver, IntentFilter), since the lifetime of this BroadcastReceiver is tied to another object (the one that registered it).

This method only accepts a int type flag, to pass in a long type flag, call bindService(android.content.Intent, android.content.ServiceConnection, android.content.Context.BindServiceFlags) instead.

checkCallingOrSelfPermission

public int checkCallingOrSelfPermission (String permission)

Determine whether the calling process of an IPC or you have been granted a particular permission. This is the same as checkCallingPermission(String), except it grants your own permissions if you are not currently processing an IPC. Use with care!

checkCallingOrSelfUriPermission

public int checkCallingOrSelfUriPermission (Uri uri, 
                int modeFlags)

Determine whether the calling process of an IPC or you has been granted permission to access a specific URI. This is the same as checkCallingUriPermission(Uri, int), except it grants your own permissions if you are not currently processing an IPC. Use with care!

checkCallingPermission

public int checkCallingPermission (String permission)

Determine whether the calling process of an IPC you are handling has been granted a particular permission. This is basically the same as calling checkPermission(java.lang.String, int, int) with the pid and uid returned by Binder.getCallingPid() and Binder.getCallingUid(). One important difference is that if you are not currently processing an IPC, this function will always fail. This is done to protect against accidentally leaking permissions; you can use checkCallingOrSelfPermission(String) to avoid this protection.

checkCallingUriPermission

public int checkCallingUriPermission (Uri uri, 
                int modeFlags)

Determine whether the calling process and uid has been granted permission to access a specific URI. This is basically the same as calling checkUriPermission(android.net.Uri, int, int, int) with the pid and uid returned by Binder.getCallingPid() and Binder.getCallingUid(). One important difference is that if you are not currently processing an IPC, this function will always fail.

checkPermission

public int checkPermission (String permission, 
                int pid, 
                int uid)

Determine whether the given permission is allowed for a particular process and user ID running in the system.

checkSelfPermission

public int checkSelfPermission (String permission)

Determine whether you have been granted a particular permission.

checkUriPermission

public int checkUriPermission (Uri uri, 
                String readPermission, 
                String writePermission, 
                int pid, 
                int uid, 
                int modeFlags)

Check both a Uri and normal permission. This allows you to perform both checkPermission(String, int, int) and checkUriPermission(Uri, int, int, int) in one call.

checkUriPermission

public int checkUriPermission (Uri uri, 
                int pid, 
                int uid, 
                int modeFlags)

Determine whether a particular process and uid has been granted permission to access a specific URI. This only checks for permissions that have been explicitly granted -- if the given process/uid has more general access to the URI's content provider then this check will always fail.

clearWallpaper

public void clearWallpaper ()

This method is deprecated.
Use WallpaperManager.clear() instead.

This method requires the caller to hold the permission Manifest.permission.SET_WALLPAPER.

createConfigurationContext

public Context createConfigurationContext (Configuration overrideConfiguration)

Return a new Context object for the current Context but whose resources are adjusted to match the given Configuration. Each call to this method returns a new instance of a Context object; Context objects are not shared, however common state (ClassLoader, other Resources for the same configuration) may be so the Context itself can be fairly lightweight.

createDeviceContext

public Context createDeviceContext (int deviceId)

Returns a new Context object from the current context but with device association given by the deviceId. Each call to this method returns a new instance of a context object. Context objects are not shared; however, common state (such as the ClassLoader and other resources for the same configuration) can be shared, so the Context itself is lightweight.

Applications that run on virtual devices may use this method to access the default device capabilities and functionality (by passing Context#DEVICE_ID_DEFAULT. Similarly, applications running on the default device may access the functionality of virtual devices.

Note that the newly created instance will be associated with the same display as the parent Context, regardless of the device ID passed here.

createDeviceProtectedStorageContext

public Context createDeviceProtectedStorageContext ()

Return a new Context object for the current Context but whose storage APIs are backed by device-protected storage.

On devices with direct boot, data stored in this location is encrypted with a key tied to the physical device, and it can be accessed immediately after the device has booted successfully, both before and after the user has authenticated with their credentials (such as a lock pattern or PIN).

Because device-protected data is available without user authentication, you should carefully limit the data you store using this Context. For example, storing sensitive authentication tokens or passwords in the device-protected area is strongly discouraged.

If the underlying device does not have the ability to store device-protected and credential-protected data using different keys, then both storage areas will become available at the same time. They remain as two distinct storage locations on disk, and only the window of availability changes.

Each call to this method returns a new instance of a Context object; Context objects are not shared, however common state (ClassLoader, other Resources for the same configuration) may be so the Context itself can be fairly lightweight.

createDisplayContext

public Context createDisplayContext (Display display)

Returns a new Context object from the current context but with resources adjusted to match the metrics of display. Each call to this method returns a new instance of a context object. Context objects are not shared; however, common state (such as the ClassLoader and other resources for the same configuration) can be shared, so the Context itself is lightweight.

Note: This Context is not expected to be updated with new configuration if the underlying display configuration changes and the cached Resources it returns could be stale. It is suggested to use DisplayManager.DisplayListener to listen for changes and re-create an instance if necessary.

This Context is not a UI context, do not use it to access UI components or obtain a WindowManager instance.

To obtain an instance of WindowManager configured to show windows on the given display, call createWindowContext(int, android.os.Bundle) on the returned display context, then call getSystemService(java.lang.String) or getSystemService(java.lang.Class) on the returned window context.

createPackageContext

public Context createPackageContext (String packageName, 
                int flags)

Return a new Context object for the given application name. This Context is the same as what the named application gets when it is launched, containing the same resources and class loader. Each call to this method returns a new instance of a Context object; Context objects are not shared, however they share common state (Resources, ClassLoader, etc) so the Context instance itself is fairly lightweight.

Throws PackageManager.NameNotFoundException if there is no application with the given package name.

Throws SecurityException if the Context requested can not be loaded into the caller's process for security reasons (see CONTEXT_INCLUDE_CODE for more information}.

createWindowContext

public Context createWindowContext (int type, 
                Bundle options)

Creates a Context for a non-activity window.

A window context is a context that can be used to add non-activity windows, such as WindowManager.LayoutParams.TYPE_APPLICATION_OVERLAY. A window context must be created from a context that has an associated Display, such as Activity or a context created with createDisplayContext(android.view.Display).

The window context is created with the appropriate Configuration for the area of the display that the windows created with it can occupy; it must be used when inflating views, such that they can be inflated with proper Resources. Below is a sample code to add an application overlay window on the primary display:

 ...
 final DisplayManager dm = anyContext.getSystemService(DisplayManager.class);
 final Display primaryDisplay = dm.getDisplay(DEFAULT_DISPLAY);
 final Context windowContext = anyContext.createDisplayContext(primaryDisplay)
         .createWindowContext(TYPE_APPLICATION_OVERLAY, null);
 final View overlayView = Inflater.from(windowContext).inflate(someLayoutXml, null);

 // WindowManager.LayoutParams initialization
 ...
 // The types used in addView and createWindowContext must match.
 mParams.type = TYPE_APPLICATION_OVERLAY;
 ...

 windowContext.getSystemService(WindowManager.class).addView(overlayView, mParams);
 

This context's configuration and resources are adjusted to an area of the display where the windows with provided type will be added. Note that all windows associated with the same context will have an affinity and can only be moved together between different displays or areas on a display. If there is a need to add different window types, or non-associated windows, separate Contexts should be used.

Creating a window context is an expensive operation. Misuse of this API may lead to a huge performance drop. The best practice is to use the same window context when possible. An approach is to create one window context with specific window type and display and use it everywhere it's needed.

After Build.VERSION_CODES#S, window context provides the capability to receive configuration changes for existing token by overriding the token of the WindowManager.LayoutParams passed in WindowManager#addView(View, LayoutParams). This is useful when an application needs to attach its window to an existing activity for window token sharing use-case.

Note that the window context in Build.VERSION_CODES#R didn't have this capability. This is a no-op for the window context in Build.VERSION_CODES#R.

 final DisplayManager dm = anyContext.getSystemService(DisplayManager.class);
 final Display primaryDisplay = dm.getDisplay(DEFAULT_DISPLAY);
 final Context windowContext = anyContext.createWindowContext(primaryDisplay,
         TYPE_APPLICATION, null);

 // Get an existing token.
 final IBinder existingToken = activity.getWindow().getAttributes().token;

 // The types used in addView() and createWindowContext() must match.
 final WindowManager.LayoutParams params = new WindowManager.LayoutParams(TYPE_APPLICATION);
 params.token = existingToken;

 // After WindowManager#addView(), the server side will extract the provided token from
 // LayoutParams#token (existingToken in the sample code), and switch to propagate
 // configuration changes from the node associated with the provided token.
 windowContext.getSystemService(WindowManager.class).addView(overlayView, mParams);
 

After Build.VERSION_CODES#S, window context provides the capability to listen to its Configuration changes by calling registerComponentCallbacks(android.content.ComponentCallbacks), while other kinds of Context will register the ComponentCallbacks to its Application context. Note that window context only propagate ComponentCallbacks#onConfigurationChanged(Configuration) callback. ComponentCallbacks#onLowMemory() or other callbacks in ComponentCallbacks2 won't be invoked.

Note that using Application or Service context for UI-related queries may result in layout or continuity issues on devices with variable screen sizes (e.g. foldables) or in multi-window modes, since these non-UI contexts may not reflect the Configuration changes for the visual container.

createWindowContext

public Context createWindowContext (Display display, 
                int type, 
                Bundle options)

Creates a Context for a non-activity window on the given Display.

Similar to createWindowContext(int, android.os.Bundle), but the display is passed in, instead of implicitly using the original Context's Display.

databaseList

public String[] databaseList ()

Returns an array of strings naming the private databases associated with this Context's application package.

deleteDatabase

public boolean deleteDatabase (String name)

Delete an existing private SQLiteDatabase associated with this Context's application package.

deleteFile

public boolean deleteFile (String name)

Delete the given private file associated with this Context's application package.

deleteSharedPreferences

public boolean deleteSharedPreferences (String name)

Delete an existing shared preferences file.

enforceCallingOrSelfPermission

public void enforceCallingOrSelfPermission (String permission, 
                String message)

If neither you nor the calling process of an IPC you are handling has been granted a particular permission, throw a SecurityException. This is the same as enforceCallingPermission(String, String), except it grants your own permissions if you are not currently processing an IPC. Use with care!

enforceCallingOrSelfUriPermission

public void enforceCallingOrSelfUriPermission (Uri uri, 
                int modeFlags, 
                String message)

If the calling process of an IPC or you has not been granted permission to access a specific URI, throw SecurityException. This is the same as enforceCallingUriPermission(Uri, int, String), except it grants your own permissions if you are not currently processing an IPC. Use with care!

enforceCallingPermission

public void enforceCallingPermission (String permission, 
                String message)

If the calling process of an IPC you are handling has not been granted a particular permission, throw a SecurityException. This is basically the same as calling enforcePermission(java.lang.String, int, int, java.lang.String) with the pid and uid returned by Binder.getCallingPid() and Binder.getCallingUid(). One important difference is that if you are not currently processing an IPC, this function will always throw the SecurityException. This is done to protect against accidentally leaking permissions; you can use enforceCallingOrSelfPermission(String, String) to avoid this protection.

enforceCallingUriPermission

public void enforceCallingUriPermission (Uri uri, 
                int modeFlags, 
                String message)

If the calling process and uid has not been granted permission to access a specific URI, throw SecurityException. This is basically the same as calling enforceUriPermission(android.net.Uri, int, int, int, java.lang.String) with the pid and uid returned by Binder.getCallingPid() and Binder.getCallingUid(). One important difference is that if you are not currently processing an IPC, this function will always throw a SecurityException.

enforcePermission

public void enforcePermission (String permission, 
                int pid, 
                int uid, 
                String message)

If the given permission is not allowed for a particular process and user ID running in the system, throw a SecurityException.

enforceUriPermission

public void enforceUriPermission (Uri uri, 
                String readPermission, 
                String writePermission, 
                int pid, 
                int uid, 
                int modeFlags, 
                String message)

Enforce both a Uri and normal permission. This allows you to perform both enforcePermission(String, int, int, String) and enforceUriPermission(Uri, int, int, int, String) in one call.

enforceUriPermission

public void enforceUriPermission (Uri uri, 
                int pid, 
                int uid, 
                int modeFlags, 
                String message)

If a particular process and uid has not been granted permission to access a specific URI, throw SecurityException. This only checks for permissions that have been explicitly granted -- if the given process/uid has more general access to the URI's content provider then this check will always fail.

fileList

public String[] fileList ()

Returns an array of strings naming the private files associated with this Context's application package.

getApplicationContext

public Context getApplicationContext ()

Return the context of the single, global Application object of the current process. This generally should only be used if you need a Context whose lifecycle is separate from the current context, that is tied to the lifetime of the process rather than the current component.

Consider for example how this interacts with registerReceiver(android.content.BroadcastReceiver, android.content.IntentFilter):

• If used from an Activity context, the receiver is being registered within that activity. This means that you are expected to unregister before the activity is done being destroyed; in fact if you do not do so, the framework will clean up your leaked registration as it removes the activity and log an error. Thus, if you use the Activity context to register a receiver that is static (global to the process, not associated with an Activity instance) then that registration will be removed on you at whatever point the activity you used is destroyed.

• If used from the Context returned here, the receiver is being registered with the global state associated with your application. Thus it will never be unregistered for you. This is necessary if the receiver is associated with static data, not a particular component. However using the ApplicationContext elsewhere can easily lead to serious leaks if you forget to unregister, unbind, etc.

getApplicationInfo

public ApplicationInfo getApplicationInfo ()

Return the full application info for this context's package.

getAssets

public AssetManager getAssets ()

Returns an AssetManager instance for the application's package.

Note: Implementations of this method should return an AssetManager instance that is consistent with the Resources instance returned by getResources(). For example, they should share the same Configuration object.

getCacheDir

public File getCacheDir ()

Returns the absolute path to the application specific cache directory on the filesystem.

The system will automatically delete files in this directory as disk space is needed elsewhere on the device. The system will always delete older files first, as reported by File#lastModified(). If desired, you can exert more control over how files are deleted using StorageManager#setCacheBehaviorGroup(File, boolean) and StorageManager#setCacheBehaviorTombstone(File, boolean).

Apps are strongly encouraged to keep their usage of cache space below the quota returned by StorageManager#getCacheQuotaBytes(java.util.UUID). If your app goes above this quota, your cached files will be some of the first to be deleted when additional disk space is needed. Conversely, if your app stays under this quota, your cached files will be some of the last to be deleted when additional disk space is needed.

Note that your cache quota will change over time depending on how frequently the user interacts with your app, and depending on how much system-wide disk space is used.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

Apps require no extra permissions to read or write to the returned path, since this path lives in their private storage.

getClassLoader

public ClassLoader getClassLoader ()

Return a class loader you can use to retrieve classes in this package.

getCodeCacheDir

public File getCodeCacheDir ()

Returns the absolute path to the application specific cache directory on the filesystem designed for storing cached code.

The system will delete any files stored in this location both when your specific application is upgraded, and when the entire platform is upgraded.

This location is optimal for storing compiled or optimized code generated by your application at runtime.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

Apps require no extra permissions to read or write to the returned path, since this path lives in their private storage.

getContentResolver

public ContentResolver getContentResolver ()

Return a ContentResolver instance for your application's package.

getDataDir

public File getDataDir ()

Returns the absolute path to the directory on the filesystem where all private files belonging to this app are stored. Apps should not use this path directly; they should instead use getFilesDir(), getCacheDir(), getDir(java.lang.String, int), or other storage APIs on this class.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

No additional permissions are required for the calling app to read or write files under the returned path.

getDatabasePath

public File getDatabasePath (String name)

Returns the absolute path on the filesystem where a database created with openOrCreateDatabase(String, int, CursorFactory) is stored.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

getDeviceId

public int getDeviceId ()

Gets the device ID this context is associated with. Applications can use this method to determine whether they are running on a virtual device and identify that device. The device ID of the host device is Context#DEVICE_ID_DEFAULT

If the underlying device ID is changed by the system, for example, when an Activity is moved to a different virtual device, applications can register to listen to changes by calling Context#registerDeviceIdChangeListener(Executor, IntConsumer).

This method will only return a reliable value for this instance if it was created with Context#createDeviceContext(int), or if this instance is a UI or Display Context. Contexts created with Context#createDeviceContext(int) will have an explicit device association, which will never change, even if the underlying device is closed or is removed. UI Contexts and Display Contexts are already associated with a display, so if the device association is not explicitly given, Context#getDeviceId() will return the ID of the device associated with the associated display. The system can assign an arbitrary device id value for Contexts not logically associated with a device.

getDir

public File getDir (String name, 
                int mode)

Retrieve, creating if needed, a new directory in which the application can place its own custom data files. You can use the returned File object to create and access files in this directory. Note that files created through a File object will only be accessible by your own application; you can only set the mode of the entire directory, not of individual files.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

Apps require no extra permissions to read or write to the returned path, since this path lives in their private storage.

getDisplay

public Display getDisplay ()

Get the display this context is associated with. Applications should use this method with Activity or a context associated with a Display via createDisplayContext(android.view.Display) to get a display object associated with a Context, or DisplayManager.getDisplay(int) to get a display object by id.

getExternalCacheDir

public File getExternalCacheDir ()

Returns absolute path to application-specific directory on the primary shared/external storage device where the application can place cache files it owns. These files are internal to the application, and not typically visible to the user as media.

This is like getCacheDir() in that these files will be deleted when the application is uninstalled, however there are some important differences:

• The platform does not always monitor the space available in shared storage, and thus may not automatically delete these files. Apps should always manage the maximum space used in this location. Currently the only time files here will be deleted by the platform is when running on Build.VERSION_CODES.JELLY_BEAN_MR1 or later and Environment#isExternalStorageEmulated(File) returns true.
• Shared storage may not always be available, since removable media can be ejected by the user. Media state can be checked using Environment#getExternalStorageState(File).
• There is no security enforced with these files. For example, any application holding Manifest.permission.WRITE_EXTERNAL_STORAGE can write to these files.

If a shared storage device is emulated (as determined by Environment#isExternalStorageEmulated(File)), its contents are backed by a private user data partition, which means there is little benefit to storing data here instead of the private directory returned by getCacheDir().

Starting in Build.VERSION_CODES.KITKAT, no permissions are required to read or write to the returned path; it's always accessible to the calling app. This only applies to paths generated for package name of the calling application. To access paths belonging to other packages, Manifest.permission.WRITE_EXTERNAL_STORAGE and/or Manifest.permission.READ_EXTERNAL_STORAGE are required.

On devices with multiple users (as described by UserManager), each user has their own isolated shared storage. Applications only have access to the shared storage for the user they're running as.

The returned path may change over time if different shared storage media is inserted, so only relative paths should be persisted.

getExternalCacheDirs

public File[] getExternalCacheDirs ()

Returns absolute paths to application-specific directories on all shared/external storage devices where the application can place cache files it owns. These files are internal to the application, and not typically visible to the user as media.

This is like getCacheDir() in that these files will be deleted when the application is uninstalled, however there are some important differences:

• The platform does not always monitor the space available in shared storage, and thus may not automatically delete these files. Apps should always manage the maximum space used in this location. Currently the only time files here will be deleted by the platform is when running on Build.VERSION_CODES.JELLY_BEAN_MR1 or later and Environment#isExternalStorageEmulated(File) returns true.
• Shared storage may not always be available, since removable media can be ejected by the user. Media state can be checked using Environment#getExternalStorageState(File).
• There is no security enforced with these files. For example, any application holding Manifest.permission.WRITE_EXTERNAL_STORAGE can write to these files.

If a shared storage device is emulated (as determined by Environment#isExternalStorageEmulated(File)), its contents are backed by a private user data partition, which means there is little benefit to storing data here instead of the private directory returned by getCacheDir().

Shared storage devices returned here are considered a stable part of the device, including physical media slots under a protective cover. The returned paths do not include transient devices, such as USB flash drives connected to handheld devices.

An application may store data on any or all of the returned devices. For example, an app may choose to store large files on the device with the most available space, as measured by StatFs.

No additional permissions are required for the calling app to read or write files under the returned path. Write access outside of these paths on secondary external storage devices is not available.

The returned paths may change over time if different shared storage media is inserted, so only relative paths should be persisted.

getExternalFilesDir

public File getExternalFilesDir (String type)

Returns the absolute path to the directory on the primary shared/external storage device where the application can place persistent files it owns. These files are internal to the applications, and not typically visible to the user as media.

This is like getFilesDir() in that these files will be deleted when the application is uninstalled, however there are some important differences:

• Shared storage may not always be available, since removable media can be ejected by the user. Media state can be checked using Environment#getExternalStorageState(File).
• There is no security enforced with these files. For example, any application holding Manifest.permission.WRITE_EXTERNAL_STORAGE can write to these files.

If a shared storage device is emulated (as determined by Environment#isExternalStorageEmulated(File)), its contents are backed by a private user data partition, which means there is little benefit to storing data here instead of the private directories returned by getFilesDir(), etc.

Starting in Build.VERSION_CODES.KITKAT, no permissions are required to read or write to the returned path; it's always accessible to the calling app. This only applies to paths generated for package name of the calling application. To access paths belonging to other packages, Manifest.permission.WRITE_EXTERNAL_STORAGE and/or Manifest.permission.READ_EXTERNAL_STORAGE are required.

On devices with multiple users (as described by UserManager), each user has their own isolated shared storage. Applications only have access to the shared storage for the user they're running as.

The returned path may change over time if different shared storage media is inserted, so only relative paths should be persisted.

Here is an example of typical code to manipulate a file in an application's shared storage:

void createExternalStoragePrivateFile() {
    // Create a path where we will place our private file on external
    // storage.
    File file = new File(getExternalFilesDir(null), "DemoFile.jpg");

    try {
        // Very simple code to copy a picture from the application's
        // resource into the external file.  Note that this code does
        // no error checking, and assumes the picture is small (does not
        // try to copy it in chunks).  Note that if external storage is
        // not currently mounted this will silently fail.
        InputStream is = getResources().openRawResource(R.drawable.balloons);
        OutputStream os = new FileOutputStream(file);
        byte[] data = new byte[is.available()];
        is.read(data);
        os.write(data);
        is.close();
        os.close();
    } catch (IOException e) {
        // Unable to create file, likely because external storage is
        // not currently mounted.
        Log.w("ExternalStorage", "Error writing " + file, e);
    }
}

void deleteExternalStoragePrivateFile() {
    // Get path for the file on external storage.  If external
    // storage is not currently mounted this will fail.
    File file = new File(getExternalFilesDir(null), "DemoFile.jpg");
    file.delete();
}

boolean hasExternalStoragePrivateFile() {
    // Get path for the file on external storage.  If external
    // storage is not currently mounted this will fail.
    File file = new File(getExternalFilesDir(null), "DemoFile.jpg");
    return file.exists();
}

If you supply a non-null type to this function, the returned file will be a path to a sub-directory of the given type. Though these files are not automatically scanned by the media scanner, you can explicitly add them to the media database with MediaScannerConnection.scanFile. Note that this is not the same as Environment.getExternalStoragePublicDirectory(), which provides directories of media shared by all applications. The directories returned here are owned by the application, and their contents will be removed when the application is uninstalled. Unlike Environment.getExternalStoragePublicDirectory(), the directory returned here will be automatically created for you.

Here is an example of typical code to manipulate a picture in an application's shared storage and add it to the media database:

void createExternalStoragePrivatePicture() {
    // Create a path where we will place our picture in our own private
    // pictures directory.  Note that we don't really need to place a
    // picture in DIRECTORY_PICTURES, since the media scanner will see
    // all media in these directories; this may be useful with other
    // media types such as DIRECTORY_MUSIC however to help it classify
    // your media for display to the user.
    File path = getExternalFilesDir(Environment.DIRECTORY_PICTURES);
    File file = new File(path, "DemoPicture.jpg");

    try {
        // Very simple code to copy a picture from the application's
        // resource into the external file.  Note that this code does
        // no error checking, and assumes the picture is small (does not
        // try to copy it in chunks).  Note that if external storage is
        // not currently mounted this will silently fail.
        InputStream is = getResources().openRawResource(R.drawable.balloons);
        OutputStream os = new FileOutputStream(file);
        byte[] data = new byte[is.available()];
        is.read(data);
        os.write(data);
        is.close();
        os.close();

        // Tell the media scanner about the new file so that it is
        // immediately available to the user.
        MediaScannerConnection.scanFile(this,
                new String[] { file.toString() }, null,
                new MediaScannerConnection.OnScanCompletedListener() {
            public void onScanCompleted(String path, Uri uri) {
                Log.i("ExternalStorage", "Scanned " + path + ":");
                Log.i("ExternalStorage", "-> uri=" + uri);
            }
        });
    } catch (IOException e) {
        // Unable to create file, likely because external storage is
        // not currently mounted.
        Log.w("ExternalStorage", "Error writing " + file, e);
    }
}

void deleteExternalStoragePrivatePicture() {
    // Create a path where we will place our picture in the user's
    // public pictures directory and delete the file.  If external
    // storage is not currently mounted this will fail.
    File path = getExternalFilesDir(Environment.DIRECTORY_PICTURES);
    if (path != null) {
        File file = new File(path, "DemoPicture.jpg");
        file.delete();
    }
}

boolean hasExternalStoragePrivatePicture() {
    // Create a path where we will place our picture in the user's
    // public pictures directory and check if the file exists.  If
    // external storage is not currently mounted this will think the
    // picture doesn't exist.
    File path = getExternalFilesDir(Environment.DIRECTORY_PICTURES);
    if (path != null) {
        File file = new File(path, "DemoPicture.jpg");
        return file.exists();
    }
    return false;
}

getExternalFilesDirs

public File[] getExternalFilesDirs (String type)

Returns absolute paths to application-specific directories on all shared/external storage devices where the application can place persistent files it owns. These files are internal to the application, and not typically visible to the user as media.

This is like getFilesDir() in that these files will be deleted when the application is uninstalled, however there are some important differences:

• Shared storage may not always be available, since removable media can be ejected by the user. Media state can be checked using Environment#getExternalStorageState(File).
• There is no security enforced with these files. For example, any application holding Manifest.permission.WRITE_EXTERNAL_STORAGE can write to these files.

If a shared storage device is emulated (as determined by Environment#isExternalStorageEmulated(File)), its contents are backed by a private user data partition, which means there is little benefit to storing data here instead of the private directories returned by getFilesDir(), etc.

Shared storage devices returned here are considered a stable part of the device, including physical media slots under a protective cover. The returned paths do not include transient devices, such as USB flash drives connected to handheld devices.

An application may store data on any or all of the returned devices. For example, an app may choose to store large files on the device with the most available space, as measured by StatFs.

No additional permissions are required for the calling app to read or write files under the returned path. Write access outside of these paths on secondary external storage devices is not available.

The returned path may change over time if different shared storage media is inserted, so only relative paths should be persisted.

getExternalMediaDirs

public File[] getExternalMediaDirs ()

This method is deprecated.
These directories still exist and are scanned, but developers are encouraged to migrate to inserting content into a MediaStore collection directly, as any app can contribute new media to MediaStore with no permissions required, starting in Build.VERSION_CODES.Q.

Returns absolute paths to application-specific directories on all shared/external storage devices where the application can place media files. These files are scanned and made available to other apps through MediaStore.

This is like getExternalFilesDirs(String) in that these files will be deleted when the application is uninstalled, however there are some important differences:

• Shared storage may not always be available, since removable media can be ejected by the user. Media state can be checked using Environment#getExternalStorageState(File).
• There is no security enforced with these files. For example, any application holding Manifest.permission.WRITE_EXTERNAL_STORAGE can write to these files.

Shared storage devices returned here are considered a stable part of the device, including physical media slots under a protective cover. The returned paths do not include transient devices, such as USB flash drives connected to handheld devices.

An application may store data on any or all of the returned devices. For example, an app may choose to store large files on the device with the most available space, as measured by StatFs.

No additional permissions are required for the calling app to read or write files under the returned path. Write access outside of these paths on secondary external storage devices is not available.

The returned paths may change over time if different shared storage media is inserted, so only relative paths should be persisted.

getFileStreamPath

public File getFileStreamPath (String name)

Returns the absolute path on the filesystem where a file created with openFileOutput(String, int) is stored.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

getFilesDir

public File getFilesDir ()

Returns the absolute path to the directory on the filesystem where files created with openFileOutput(String, int) are stored.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

No additional permissions are required for the calling app to read or write files under the returned path.

getMainExecutor

public Executor getMainExecutor ()

Return an Executor that will run enqueued tasks on the main thread associated with this context. This is the thread used to dispatch calls to application components (activities, services, etc).

getMainLooper

public Looper getMainLooper ()

Return the Looper for the main thread of the current process. This is the thread used to dispatch calls to application components (activities, services, etc).

By definition, this method returns the same result as would be obtained by calling Looper.getMainLooper().

getNoBackupFilesDir

public File getNoBackupFilesDir ()

Returns the absolute path to the directory on the filesystem similar to getFilesDir(). The difference is that files placed under this directory will be excluded from automatic backup to remote storage. See BackupAgent for a full discussion of the automatic backup mechanism in Android.

The returned path may change over time if the calling app is moved to an adopted storage device, so only relative paths should be persisted.

No additional permissions are required for the calling app to read or write files under the returned path.

getObbDir

public File getObbDir ()

Return the primary shared/external storage directory where this application's OBB files (if there are any) can be found. Note if the application does not have any OBB files, this directory may not exist.

This is like getFilesDir() in that these files will be deleted when the application is uninstalled, however there are some important differences:

• Shared storage may not always be available, since removable media can be ejected by the user. Media state can be checked using Environment#getExternalStorageState(File).
• There is no security enforced with these files. For example, any application holding Manifest.permission.WRITE_EXTERNAL_STORAGE can write to these files.

Starting in Build.VERSION_CODES.KITKAT, no permissions are required to read or write to the path that this method returns. However, starting from Build.VERSION_CODES.M, to read the OBB expansion files, you must declare the Manifest.permission.READ_EXTERNAL_STORAGE permission in the app manifest and ask for permission at runtime as follows:

<uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE" android:maxSdkVersion="23" />

Starting from Build.VERSION_CODES.N, Manifest.permission.READ_EXTERNAL_STORAGE permission is not required, so don\u2019t ask for this permission at runtime. To handle both cases, your app must first try to read the OBB file, and if it fails, you must request Manifest.permission.READ_EXTERNAL_STORAGE permission at runtime.

The following code snippet shows how to do this:

 File obb = new File(obb_filename);
 boolean open_failed = false;

 try {
     BufferedReader br = new BufferedReader(new FileReader(obb));
     open_failed = false;
     ReadObbFile(br);
 } catch (IOException e) {
     open_failed = true;
 }

 if (open_failed) {
     // request READ_EXTERNAL_STORAGE permission before reading OBB file
     ReadObbFileWithPermission();
 }
 

getObbDirs

public File[] getObbDirs ()

Returns absolute paths to application-specific directories on all shared/external storage devices where the application's OBB files (if there are any) can be found. Note if the application does not have any OBB files, these directories may not exist.

This is like getFilesDir() in that these files will be deleted when the application is uninstalled, however there are some important differences:

• Shared storage may not always be available, since removable media can be ejected by the user. Media state can be checked using Environment#getExternalStorageState(File).
• There is no security enforced with these files. For example, any application holding Manifest.permission.WRITE_EXTERNAL_STORAGE can write to these files.

Shared storage devices returned here are considered a stable part of the device, including physical media slots under a protective cover. The returned paths do not include transient devices, such as USB flash drives connected to handheld devices.

An application may store data on any or all of the returned devices. For example, an app may choose to store large files on the device with the most available space, as measured by StatFs.

No additional permissions are required for the calling app to read or write files under the returned path. Write access outside of these paths on secondary external storage devices is not available.

getPackageCodePath

public String getPackageCodePath ()

Return the full path to this context's primary Android package. The Android package is a ZIP file which contains application's primary code and assets.

Note: this is not generally useful for applications, since they should not be directly accessing the file system.

getPackageManager

public PackageManager getPackageManager ()

Return PackageManager instance to find global package information.

getPackageName

public String getPackageName ()

Return the name of this application's package.

getPackageResourcePath

public String getPackageResourcePath ()

Return the full path to this context's primary Android package. The Android package is a ZIP file which contains the application's primary resources.

Note: this is not generally useful for applications, since they should not be directly accessing the file system.

getResources

public Resources getResources ()

Returns a Resources instance for the application's package.

Note: Implementations of this method should return a Resources instance that is consistent with the AssetManager instance returned by getAssets(). For example, they should share the same Configuration object.

getSharedPreferences

public SharedPreferences getSharedPreferences (String name, 
                int mode)

Retrieve and hold the contents of the preferences file 'name', returning a SharedPreferences through which you can retrieve and modify its values. Only one instance of the SharedPreferences object is returned to any callers for the same name, meaning they will see each other's edits as soon as they are made.

This method is thread-safe.

If the preferences directory does not already exist, it will be created when this method is called.

If a preferences file by this name does not exist, it will be created when you retrieve an editor (SharedPreferences#edit()) and then commit changes (SharedPreferences.Editor.commit() or SharedPreferences.Editor#apply()).

getSystemService

public Object getSystemService (String name)

Return the handle to a system-level service by name. The class of the returned object varies by the requested name. Currently available names are:

WINDOW_SERVICE ("window")

The top-level window manager in which you can place custom windows. The returned object is a WindowManager. Must only be obtained from a visual context such as Activity or a Context created with createWindowContext(int, android.os.Bundle), which are adjusted to the configuration and visual bounds of an area on screen.

LAYOUT_INFLATER_SERVICE ("layout_inflater")

A LayoutInflater for inflating layout resources in this context. Must only be obtained from a visual context such as Activity or a Context created with createWindowContext(int, android.os.Bundle), which are adjusted to the configuration and visual bounds of an area on screen.

ACTIVITY_SERVICE ("activity")

A ActivityManager for interacting with the global activity state of the system.

WALLPAPER_SERVICE ("wallpaper")

A WallpaperService for accessing wallpapers in this context. Must only be obtained from a visual context such as Activity or a Context created with createWindowContext(int, android.os.Bundle), which are adjusted to the configuration and visual bounds of an area on screen.

POWER_SERVICE ("power")

A PowerManager for controlling power management.

ALARM_SERVICE ("alarm")

A AlarmManager for receiving intents at the time of your choosing.

NOTIFICATION_SERVICE ("notification")

A NotificationManager for informing the user of background events.

KEYGUARD_SERVICE ("keyguard")

A KeyguardManager for controlling keyguard.

LOCATION_SERVICE ("location")

A LocationManager for controlling location (e.g., GPS) updates.

SEARCH_SERVICE ("search")

A SearchManager for handling search.

VIBRATOR_MANAGER_SERVICE ("vibrator_manager")

A VibratorManager for accessing the device vibrators, interacting with individual ones and playing synchronized effects on multiple vibrators.

VIBRATOR_SERVICE ("vibrator")

A Vibrator for interacting with the vibrator hardware.

CONNECTIVITY_SERVICE ("connectivity")

A ConnectivityManager for handling management of network connections.

IPSEC_SERVICE ("ipsec")

A IpSecManager for managing IPSec on sockets and networks.

WIFI_SERVICE ("wifi")

A WifiManager for management of Wi-Fi connectivity. On releases before Android 7, it should only be obtained from an application context, and not from any other derived context to avoid memory leaks within the calling process.

WIFI_AWARE_SERVICE ("wifiaware")

A WifiAwareManager for management of Wi-Fi Aware discovery and connectivity.

WIFI_P2P_SERVICE ("wifip2p")

A WifiP2pManager for management of Wi-Fi Direct connectivity.

INPUT_METHOD_SERVICE ("input_method")

An InputMethodManager for management of input methods.

UI_MODE_SERVICE ("uimode")

An UiModeManager for controlling UI modes.

DOWNLOAD_SERVICE ("download")

A DownloadManager for requesting HTTP downloads

BATTERY_SERVICE ("batterymanager")

A BatteryManager for managing battery state

JOB_SCHEDULER_SERVICE ("taskmanager")

A JobScheduler for managing scheduled tasks

NETWORK_STATS_SERVICE ("netstats")

A NetworkStatsManager for querying network usage statistics.

HARDWARE_PROPERTIES_SERVICE ("hardware_properties")

A HardwarePropertiesManager for accessing hardware properties.

DOMAIN_VERIFICATION_SERVICE ("domain_verification")

A DomainVerificationManager for accessing web domain approval state.

DISPLAY_HASH_SERVICE ("display_hash")

A DisplayHashManager for management of display hashes.

Note: System services obtained via this API may be closely associated with the Context in which they are obtained from. In general, do not share the service objects between various different contexts (Activities, Applications, Services, Providers, etc.)

Note: Instant apps, for which PackageManager#isInstantApp() returns true, don't have access to the following system services: DEVICE_POLICY_SERVICE, FINGERPRINT_SERVICE, KEYGUARD_SERVICE, SHORTCUT_SERVICE, USB_SERVICE, WALLPAPER_SERVICE, WIFI_P2P_SERVICE, WIFI_SERVICE, WIFI_AWARE_SERVICE. For these services this method will return null. Generally, if you are running as an instant app you should always check whether the result of this method is null.

Note: When implementing this method, keep in mind that new services can be added on newer Android releases, so if you're looking for just the explicit names mentioned above, make sure to return null when you don't recognize the name — if you throw a RuntimeException exception instead, your app might break on new Android releases.

getSystemServiceName

public String getSystemServiceName (Class<?> serviceClass)

Gets the name of the system-level service that is represented by the specified class.

getTheme

public Resources.Theme getTheme ()

Return the Theme object associated with this Context.

getWallpaper

public Drawable getWallpaper ()

This method is deprecated.
Use WallpaperManager.get() instead.

getWallpaperDesiredMinimumHeight

public int getWallpaperDesiredMinimumHeight ()

This method is deprecated.
Use WallpaperManager.getDesiredMinimumHeight() instead.

getWallpaperDesiredMinimumWidth

public int getWallpaperDesiredMinimumWidth ()

This method is deprecated.
Use WallpaperManager.getDesiredMinimumWidth() instead.

grantUriPermission

public void grantUriPermission (String toPackage, 
                Uri uri, 
                int modeFlags)

Grant permission to access a specific Uri to another package, regardless of whether that package has general permission to access the Uri's content provider. This can be used to grant specific, temporary permissions, typically in response to user interaction (such as the user opening an attachment that you would like someone else to display).

Normally you should use Intent.FLAG_GRANT_READ_URI_PERMISSION or Intent.FLAG_GRANT_WRITE_URI_PERMISSION with the Intent being used to start an activity instead of this function directly. If you use this function directly, you should be sure to call revokeUriPermission(Uri, int) when the target should no longer be allowed to access it.

To succeed, the content provider owning the Uri must have set the grantUriPermissions attribute in its manifest or included the <grant-uri-permissions> tag.

isDeviceProtectedStorage

public boolean isDeviceProtectedStorage ()

Indicates if the storage APIs of this Context are backed by device-protected storage.

isRestricted

public boolean isRestricted ()

Indicates whether this Context is restricted.

moveDatabaseFrom

public boolean moveDatabaseFrom (Context sourceContext, 
                String name)

Move an existing database file from the given source storage context to this context. This is typically used to migrate data between storage locations after an upgrade, such as migrating to device protected storage.

The database must be closed before being moved.

moveSharedPreferencesFrom

public boolean moveSharedPreferencesFrom (Context sourceContext, 
                String name)

Move an existing shared preferences file from the given source storage context to this context. This is typically used to migrate data between storage locations after an upgrade, such as moving to device protected storage.

openFileInput

public FileInputStream openFileInput (String name)

Open a private file associated with this Context's application package for reading.

openFileOutput

public FileOutputStream openFileOutput (String name, 
                int mode)

Open a private file associated with this Context's application package for writing. Creates the file if it doesn't already exist.

No additional permissions are required for the calling app to read or write the returned file.

openOrCreateDatabase

public SQLiteDatabase openOrCreateDatabase (String file, 
                int mode, 
                SQLiteDatabase.CursorFactory factory, 
                DatabaseErrorHandler errorHandler)

Open a new private SQLiteDatabase associated with this Context's application package. Creates the database file if it doesn't exist.

Accepts input param: a concrete instance of DatabaseErrorHandler to be used to handle corruption when sqlite reports database corruption.

openOrCreateDatabase

public SQLiteDatabase openOrCreateDatabase (String file, 
                int mode, 
                SQLiteDatabase.CursorFactory factory)

Open a new private SQLiteDatabase associated with this Context's application package. Create the database file if it doesn't exist.

peekWallpaper

public Drawable peekWallpaper ()

This method is deprecated.
Use WallpaperManager.peek() instead.

registerReceiver

public Intent registerReceiver (BroadcastReceiver receiver, 
                IntentFilter filter)

Register a BroadcastReceiver to be run in the main activity thread. The receiver will be called with any broadcast Intent that matches filter, in the main application thread.

The system may broadcast Intents that are "sticky" -- these stay around after the broadcast has finished, to be sent to any later registrations. If your IntentFilter matches one of these sticky Intents, that Intent will be returned by this function and sent to your receiver as if it had just been broadcast.

There may be multiple sticky Intents that match filter, in which case each of these will be sent to receiver. In this case, only one of these can be returned directly by the function; which of these that is returned is arbitrarily decided by the system.

If you know the Intent your are registering for is sticky, you can supply null for your receiver. In this case, no receiver is registered -- the function simply returns the sticky Intent that matches filter. In the case of multiple matches, the same rules as described above apply.

See BroadcastReceiver for more information on Intent broadcasts.

As of Build.VERSION_CODES.UPSIDE_DOWN_CAKE, the system can place context-registered broadcasts in a queue while the app is in the cached state. When the app leaves the cached state, such as returning to the foreground, the system delivers any queued broadcasts. Multiple instances of certain broadcasts might be merged into one broadcast.

As of Build.VERSION_CODES.ICE_CREAM_SANDWICH, receivers registered with this method will correctly respect the Intent#setPackage(String) specified for an Intent being broadcast. Prior to that, it would be ignored and delivered to all matching registered receivers. Be careful if using this for security.

For apps targeting Build.VERSION_CODES.UPSIDE_DOWN_CAKE, either RECEIVER_EXPORTED or RECEIVER_NOT_EXPORTED must be specified if the receiver is not being registered for system broadcasts or a SecurityException will be thrown. See registerReceiver(android.content.BroadcastReceiver, android.content.IntentFilter, int) to register a receiver with flags.

Note: this method cannot be called from a BroadcastReceiver component; that is, from a BroadcastReceiver that is declared in an application's manifest. It is okay, however, to call this method from another BroadcastReceiver that has itself been registered at run time with registerReceiver(BroadcastReceiver, IntentFilter), since the lifetime of such a registered BroadcastReceiver is tied to the object that registered it.

registerReceiver

public Intent registerReceiver (BroadcastReceiver receiver, 
                IntentFilter filter, 
                int flags)

Register to receive intent broadcasts, with the receiver optionally being exposed to Instant Apps. See registerReceiver(android.content.BroadcastReceiver, android.content.IntentFilter) for more information. By default Instant Apps cannot interact with receivers in other applications, this allows you to expose a receiver that Instant Apps can interact with.

See BroadcastReceiver for more information on Intent broadcasts.

As of Build.VERSION_CODES.UPSIDE_DOWN_CAKE, the system can place context-registered broadcasts in a queue while the app is in the cached state. When the app leaves the cached state, such as returning to the foreground, the system delivers any queued broadcasts. Multiple instances of certain broadcasts might be merged into one broadcast.

As of Build.VERSION_CODES.ICE_CREAM_SANDWICH, receivers registered with this method will correctly respect the Intent#setPackage(String) specified for an Intent being broadcast. Prior to that, it would be ignored and delivered to all matching registered receivers. Be careful if using this for security.

registerReceiver

public Intent registerReceiver (BroadcastReceiver receiver, 
                IntentFilter filter, 
                String broadcastPermission, 
                Handler scheduler, 
                int flags)

Register to receive intent broadcasts, to run in the context of scheduler. See registerReceiver(android.content.BroadcastReceiver, android.content.IntentFilter, int) and registerReceiver(android.content.BroadcastReceiver, android.content.IntentFilter, java.lang.String, android.os.Handler) for more information.