Added in API level 1

Summary: Fields | Inherited Fields | Ctors | Methods | Inherited Methods

PushbackInputStream

public class PushbackInputStream
extends FilterInputStream

java.lang.Object
↳	java.io.InputStream
	↳	java.io.FilterInputStream
		↳	java.io.PushbackInputStream

A PushbackInputStream adds functionality to another input stream, namely the ability to "push back" or "unread" bytes, by storing pushed-back bytes in an internal buffer. This is useful in situations where it is convenient for a fragment of code to read an indefinite number of data bytes that are delimited by a particular byte value; after reading the terminating byte, the code fragment can "unread" it, so that the next read operation on the input stream will reread the byte that was pushed back. For example, bytes representing the characters constituting an identifier might be terminated by a byte representing an operator character; a method whose job is to read just an identifier can read until it sees the operator and then push the operator back to be re-read.

Summary

Fields
`protected byte[]`	`buf` The pushback buffer.
`protected int`	`pos` The position within the pushback buffer from which the next byte will be read.

Inherited fields

From class java.io.FilterInputStream


    protected
    
    
    InputStream

in

The input stream to be filtered.

Public constructors
`PushbackInputStream(InputStream in)` Creates a `PushbackInputStream` with a 1-byte pushback buffer, and saves its argument, the input stream `in`, for later use.
`PushbackInputStream(InputStream in, int size)` Creates a `PushbackInputStream` with a pushback buffer of the specified `size`, and saves its argument, the input stream `in`, for later use.

Public methods
`int`	`available()` Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream.
`void`	`close()` Closes this input stream and releases any system resources associated with the stream.
`void`	`mark(int readlimit)` Marks the current position in this input stream.
`boolean`	`markSupported()` Tests if this input stream supports the `mark` and `reset` methods, which it does not.
`int`	`read()` Reads the next byte of data from this input stream.
`int`	`read(byte[] b, int off, int len)` Reads up to `len` bytes of data from this input stream into an array of bytes.
`void`	`reset()` Repositions this stream to the position at the time the `mark` method was last called on this input stream.
`long`	`skip(long n)` Skips over and discards `n` bytes of data from this input stream.
`void`	`unread(byte[] b, int off, int len)` Pushes back a portion of an array of bytes by copying it to the front of the pushback buffer.
`void`	`unread(int b)` Pushes back a byte by copying it to the front of the pushback buffer.
`void`	`unread(byte[] b)` Pushes back an array of bytes by copying it to the front of the pushback buffer.

Inherited methods

From class


        
          java.io.FilterInputStream

`int`	`available()` Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next caller of a method for this input stream.
`void`	`close()` Closes this input stream and releases any system resources associated with the stream.
`void`	`mark(int readlimit)` Marks the current position in this input stream.
`boolean`	`markSupported()` Tests if this input stream supports the `mark` and `reset` methods.
`int`	`read()` Reads the next byte of data from this input stream.
`int`	`read(byte[] b, int off, int len)` Reads up to `len` bytes of data from this input stream into an array of bytes.
`int`	`read(byte[] b)` Reads up to `b.length` bytes of data from this input stream into an array of bytes.
`void`	`reset()` Repositions this stream to the position at the time the `mark` method was last called on this input stream.
`long`	`skip(long n)` Skips over and discards `n` bytes of data from the input stream.

From class


        
          java.io.InputStream

`int`	`available()` Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected.
`void`	`close()` Closes this input stream and releases any system resources associated with the stream.
`void`	`mark(int readlimit)` Marks the current position in this input stream.
`boolean`	`markSupported()` Tests if this input stream supports the `mark` and `reset` methods.
`static InputStream`	`nullInputStream()` Returns a new `InputStream` that reads no bytes.
`int`	`read(byte[] b)` Reads some number of bytes from the input stream and stores them into the buffer array `b`.
`abstract int`	`read()` Reads the next byte of data from the input stream.
`int`	`read(byte[] b, int off, int len)` Reads up to `len` bytes of data from the input stream into an array of bytes.
`byte[]`	`readAllBytes()` Reads all remaining bytes from the input stream.
`int`	`readNBytes(byte[] b, int off, int len)` Reads the requested number of bytes from the input stream into the given byte array.
`byte[]`	`readNBytes(int len)` Reads up to a specified number of bytes from the input stream.
`void`	`reset()` Repositions this stream to the position at the time the `mark` method was last called on this input stream.
`long`	`skip(long n)` Skips over and discards `n` bytes of data from this input stream.
`void`	`skipNBytes(long n)` Skips over and discards exactly `n` bytes of data from this input stream.
`long`	`transferTo(OutputStream out)` Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read.

From class


        
          java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long timeoutMillis, int nanos)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait(long timeoutMillis)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait()` Causes the current thread to wait until it is awakened, typically by being notified or interrupted.

From interface


        
          java.io.Closeable


      close()

Closes this stream and releases any system resources associated with it.

From interface


        
          java.lang.AutoCloseable


      close()

Closes this resource, relinquishing any underlying resources.

Fields

buf

Added in API level 1

protected byte[] buf

The pushback buffer.

pos

Added in API level 1

protected int pos

The position within the pushback buffer from which the next byte will be read. When the buffer is empty, pos is equal to buf.length; when the buffer is full, pos is equal to zero.

Public constructors

PushbackInputStream

Added in API level 1

public PushbackInputStream (InputStream in)

Creates a PushbackInputStream with a 1-byte pushback buffer, and saves its argument, the input stream in, for later use. Initially, the pushback buffer is empty.

Parameters
`in`	`InputStream`: the input stream from which bytes will be read.

PushbackInputStream

Added in API level 1

public PushbackInputStream (InputStream in, 
                int size)

Creates a PushbackInputStream with a pushback buffer of the specified size, and saves its argument, the input stream in, for later use. Initially, the pushback buffer is empty.

Parameters
`in`	`InputStream`: the input stream from which bytes will be read.
`size`	`int`: the size of the pushback buffer.

Throws
`IllegalArgumentException`	if `size <= 0`

Public methods

available

Added in API level 1

public int available ()

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream. The next invocation might be the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.

The method returns the sum of the number of bytes that have been pushed back and the value returned by available.

Returns
`int`	the number of bytes that can be read (or skipped over) from the input stream without blocking.

Throws
`IOException`	if this input stream has been closed by invoking its `close()` method, or an I/O error occurs.

See also:

close

Added in API level 1

public void close ()

Closes this input stream and releases any system resources associated with the stream. Once the stream has been closed, further read(), unread(), available(), reset(), or skip() invocations will throw an IOException. Closing a previously closed stream has no effect.

Throws
`IOException`	if an I/O error occurs.

mark

Added in API level 1

public void mark (int readlimit)

Marks the current position in this input stream.

The mark method of PushbackInputStream does nothing.

Parameters
`readlimit`	`int`: the maximum limit of bytes that can be read before the mark position becomes invalid.

See also:

InputStream.reset()

markSupported

Added in API level 1

public boolean markSupported ()

Tests if this input stream supports the mark and reset methods, which it does not.

Returns
`boolean`	`false`, since this class does not support the `mark` and `reset` methods.

See also:

read

Added in API level 1

public int read ()

Reads the next byte of data from this input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

This method returns the most recently pushed-back byte, if there is one, and otherwise calls the read method of its underlying input stream and returns whatever value that method returns.

Returns
`int`	the next byte of data, or `-1` if the end of the stream has been reached.

Throws
`IOException`	if this input stream has been closed by invoking its `close()` method, or an I/O error occurs.

See also:

InputStream.read()

read

Added in API level 1

public int read (byte[] b, 
                int off, 
                int len)

Reads up to len bytes of data from this input stream into an array of bytes. This method first reads any pushed-back bytes; after that, if fewer than len bytes have been read then it reads from the underlying input stream. If len is not zero, the method blocks until at least 1 byte of input is available; otherwise, no bytes are read and 0 is returned.

Parameters
`b`	`byte`: the buffer into which the data is read.
`off`	`int`: the start offset in the destination array `b`
`len`	`int`: the maximum number of bytes read.

Returns
`int`	the total number of bytes read into the buffer, or `-1` if there is no more data because the end of the stream has been reached.

Throws
`NullPointerException`	If `b` is `null`.
`IndexOutOfBoundsException`	If `off` is negative, `len` is negative, or `len` is greater than `b.length - off`
`IOException`	if this input stream has been closed by invoking its `close()` method, or an I/O error occurs.

See also:

InputStream.read(byte[], int, int)

reset

Added in API level 1

public void reset ()

Repositions this stream to the position at the time the mark method was last called on this input stream.

The method reset for class PushbackInputStream does nothing except throw an IOException.

Throws
`IOException`	if this method is invoked.

See also:

skip

Added in API level 1

public long skip (long n)

Skips over and discards n bytes of data from this input stream. The skip method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly zero. If n is negative, no bytes are skipped.

The skip method of PushbackInputStream first skips over the bytes in the pushback buffer, if any. It then calls the skip method of the underlying input stream if more bytes need to be skipped. The actual number of bytes skipped is returned.

Parameters
`n`	`long`:

Returns
`long`	the actual number of bytes skipped.

Throws
`IOException`	if the stream has been closed by invoking its `close()` method, `in.skip(n)` throws an IOException, or an I/O error occurs.

See also:

unread

Added in API level 1

public void unread (byte[] b, 
                int off, 
                int len)

Pushes back a portion of an array of bytes by copying it to the front of the pushback buffer. After this method returns, the next byte to be read will have the value b[off], the byte after that will have the value b[off+1], and so forth.

Parameters
`b`	`byte`: the byte array to push back.
`off`	`int`: the start offset of the data.
`len`	`int`: the number of bytes to push back.

Throws
`IOException`	If there is not enough room in the pushback buffer for the specified number of bytes, or this input stream has been closed by invoking its `close()` method.

unread

Added in API level 1

public void unread (int b)

Pushes back a byte by copying it to the front of the pushback buffer. After this method returns, the next byte to be read will have the value (byte)b.

Parameters
`b`	`int`: the `int` value whose low-order byte is to be pushed back.

Throws
`IOException`	If there is not enough room in the pushback buffer for the byte, or this input stream has been closed by invoking its `close()` method.

unread

Added in API level 1

public void unread (byte[] b)

Pushes back an array of bytes by copying it to the front of the pushback buffer. After this method returns, the next byte to be read will have the value b[0], the byte after that will have the value b[1], and so forth.

Parameters
`b`	`byte`: the byte array to push back

Throws
`IOException`	If there is not enough room in the pushback buffer for the specified number of bytes, or this input stream has been closed by invoking its `close()` method.