Period

ZERO

public static final Period ZERO

A constant for a period of zero.

addTo

public Temporal addTo (Temporal temporal)

Adds this period to the specified temporal object.

This returns a temporal object of the same observable type as the input with this period added. If the temporal has a chronology, it must be the ISO chronology.

In most cases, it is clearer to reverse the calling pattern by using Temporal.plus(TemporalAmount).

   // these two lines are equivalent, but the second approach is recommended
   dateTime = thisPeriod.addTo(dateTime);
   dateTime = dateTime.plus(thisPeriod);
 

The calculation operates as follows. First, the chronology of the temporal is checked to ensure it is ISO chronology or null. Second, if the months are zero, the years are added if non-zero, otherwise the combination of years and months is added if non-zero. Finally, any days are added.

This approach ensures that a partial period can be added to a partial date. For example, a period of years and/or months can be added to a YearMonth, but a period including days cannot. The approach also adds years and months together when necessary, which ensures correct behaviour at the end of the month.

This instance is immutable and unaffected by this method call.

between

public static Period between (LocalDate startDateInclusive, 
                LocalDate endDateExclusive)

Obtains a Period consisting of the number of years, months, and days between two dates.

The start date is included, but the end date is not. The period is calculated by removing complete months, then calculating the remaining number of days, adjusting to ensure that both have the same sign. The number of months is then split into years and months based on a 12 month year. A month is considered if the end day-of-month is greater than or equal to the start day-of-month. For example, from 2010-01-15 to 2011-03-18 is one year, two months and three days.

The result of this method can be a negative period if the end is before the start. The negative sign will be the same in each of year, month and day.

equals

public boolean equals (Object obj)

Checks if this period is equal to another period.

The comparison is based on the type Period and each of the three amounts. To be equal, the years, months and days units must be individually equal. Note that this means that a period of "15 Months" is not equal to a period of "1 Year and 3 Months".

from

public static Period from (TemporalAmount amount)

Obtains an instance of Period from a temporal amount.

This obtains a period based on the specified amount. A TemporalAmount represents an amount of time, which may be date-based or time-based, which this factory extracts to a Period.

The conversion loops around the set of units from the amount and uses the YEARS, MONTHS and DAYS units to create a period. If any other units are found then an exception is thrown.

If the amount is a ChronoPeriod then it must use the ISO chronology.

get

public long get (TemporalUnit unit)

Gets the value of the requested unit.

This returns a value for each of the three supported units, YEARS, MONTHS and DAYS. All other units throw an exception.

getChronology

public IsoChronology getChronology ()

Gets the chronology of this period, which is the ISO calendar system.

The Chronology represents the calendar system in use. The ISO-8601 calendar system is the modern civil calendar system used today in most of the world. It is equivalent to the proleptic Gregorian calendar system, in which today's rules for leap years are applied for all time.

getDays

public int getDays ()

Gets the amount of days of this period.

This returns the days unit.

getMonths

public int getMonths ()

Gets the amount of months of this period.

This returns the months unit.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

getUnits

public List<TemporalUnit> getUnits ()

Gets the set of units supported by this period.

The supported units are YEARS, MONTHS and DAYS. They are returned in the order years, months, days.

This set can be used in conjunction with get(java.time.temporal.TemporalUnit) to access the entire state of the period.

getYears

public int getYears ()

Gets the amount of years of this period.

This returns the years unit.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

hashCode

public int hashCode ()

A hash code for this period.

isNegative

public boolean isNegative ()

Checks if any of the three units of this period are negative.

This checks whether the years, months or days units are less than zero.

isZero

public boolean isZero ()

Checks if all three units of this period are zero.

A zero period has the value zero for the years, months and days units.

minus

public Period minus (TemporalAmount amountToSubtract)

Returns a copy of this period with the specified period subtracted.

This operates separately on the years, months and days. No normalization is performed.

For example, "1 year, 6 months and 3 days" minus "2 years, 2 months and 2 days" returns "-1 years, 4 months and 1 day".

The specified amount is typically an instance of Period. Other types are interpreted using Period.from(TemporalAmount).

This instance is immutable and unaffected by this method call.

minusDays

public Period minusDays (long daysToSubtract)

Returns a copy of this period with the specified days subtracted.

This subtracts the amount from the days unit in a copy of this period. The years and months units are unaffected. For example, "1 year, 6 months and 3 days" minus 2 days returns "1 year, 6 months and 1 day".

This instance is immutable and unaffected by this method call.

minusMonths

public Period minusMonths (long monthsToSubtract)

Returns a copy of this period with the specified months subtracted.

This subtracts the amount from the months unit in a copy of this period. The years and days units are unaffected. For example, "1 year, 6 months and 3 days" minus 2 months returns "1 year, 4 months and 3 days".

This instance is immutable and unaffected by this method call.

minusYears

public Period minusYears (long yearsToSubtract)

Returns a copy of this period with the specified years subtracted.

This subtracts the amount from the years unit in a copy of this period. The months and days units are unaffected. For example, "1 year, 6 months and 3 days" minus 2 years returns "-1 years, 6 months and 3 days".

This instance is immutable and unaffected by this method call.

multipliedBy

public Period multipliedBy (int scalar)

Returns a new instance with each element in this period multiplied by the specified scalar.

This returns a period with each of the years, months and days units individually multiplied. For example, a period of "2 years, -3 months and 4 days" multiplied by 3 will return "6 years, -9 months and 12 days". No normalization is performed.

negated

public Period negated ()

Returns a new instance with each amount in this period negated.

This returns a period with each of the years, months and days units individually negated. For example, a period of "2 years, -3 months and 4 days" will be negated to "-2 years, 3 months and -4 days". No normalization is performed.

normalized

public Period normalized ()

Returns a copy of this period with the years and months normalized.

This normalizes the years and months units, leaving the days unit unchanged. The months unit is adjusted to have an absolute value less than 12, with the years unit being adjusted to compensate. For example, a period of "1 Year and 15 months" will be normalized to "2 years and 3 months".

The sign of the years and months units will be the same after normalization. For example, a period of "1 year and -25 months" will be normalized to "-1 year and -1 month".

This instance is immutable and unaffected by this method call.

of

public static Period of (int years, 
                int months, 
                int days)

Obtains a Period representing a number of years, months and days.

This creates an instance based on years, months and days.

ofDays

public static Period ofDays (int days)

Obtains a Period representing a number of days.

The resulting period will have the specified days. The years and months units will be zero.

ofMonths

public static Period ofMonths (int months)

Obtains a Period representing a number of months.

The resulting period will have the specified months. The years and days units will be zero.

ofWeeks

public static Period ofWeeks (int weeks)

Obtains a Period representing a number of weeks.

The resulting period will be day-based, with the amount of days equal to the number of weeks multiplied by 7. The years and months units will be zero.

ofYears

public static Period ofYears (int years)

Obtains a Period representing a number of years.

The resulting period will have the specified years. The months and days units will be zero.

parse

public static Period parse (CharSequence text)

Obtains a Period from a text string such as PnYnMnD.

This will parse the string produced by toString() which is based on the ISO-8601 period formats PnYnMnD and PnW.

The string starts with an optional sign, denoted by the ASCII negative or positive symbol. If negative, the whole period is negated. The ASCII letter "P" is next in upper or lower case. There are then four sections, each consisting of a number and a suffix. At least one of the four sections must be present. The sections have suffixes in ASCII of "Y", "M", "W" and "D" for years, months, weeks and days, accepted in upper or lower case. The suffixes must occur in order. The number part of each section must consist of ASCII digits. The number may be prefixed by the ASCII negative or positive symbol. The number must parse to an int.

The leading plus/minus sign, and negative values for other units are not part of the ISO-8601 standard. In addition, ISO-8601 does not permit mixing between the PnYnMnD and PnW formats. Any week-based input is multiplied by 7 and treated as a number of days.

For example, the following are valid inputs:

   "P2Y"             -- Period.ofYears(2)
   "P3M"             -- Period.ofMonths(3)
   "P4W"             -- Period.ofWeeks(4)
   "P5D"             -- Period.ofDays(5)
   "P1Y2M3D"         -- Period.of(1, 2, 3)
   "P1Y2M3W4D"       -- Period.of(1, 2, 25)
   "P-1Y2M"          -- Period.of(-1, 2, 0)
   "-P1Y2M"          -- Period.of(-1, -2, 0)
 

plus

public Period plus (TemporalAmount amountToAdd)

Returns a copy of this period with the specified period added.

This operates separately on the years, months and days. No normalization is performed.

For example, "1 year, 6 months and 3 days" plus "2 years, 2 months and 2 days" returns "3 years, 8 months and 5 days".

The specified amount is typically an instance of Period. Other types are interpreted using Period.from(TemporalAmount).

This instance is immutable and unaffected by this method call.

plusDays

public Period plusDays (long daysToAdd)

Returns a copy of this period with the specified days added.

This adds the amount to the days unit in a copy of this period. The years and months units are unaffected. For example, "1 year, 6 months and 3 days" plus 2 days returns "1 year, 6 months and 5 days".

This instance is immutable and unaffected by this method call.

plusMonths

public Period plusMonths (long monthsToAdd)

Returns a copy of this period with the specified months added.

This adds the amount to the months unit in a copy of this period. The years and days units are unaffected. For example, "1 year, 6 months and 3 days" plus 2 months returns "1 year, 8 months and 3 days".

This instance is immutable and unaffected by this method call.

plusYears

public Period plusYears (long yearsToAdd)

Returns a copy of this period with the specified years added.

This adds the amount to the years unit in a copy of this period. The months and days units are unaffected. For example, "1 year, 6 months and 3 days" plus 2 years returns "3 years, 6 months and 3 days".

This instance is immutable and unaffected by this method call.

subtractFrom

public Temporal subtractFrom (Temporal temporal)

Subtracts this period from the specified temporal object.

This returns a temporal object of the same observable type as the input with this period subtracted. If the temporal has a chronology, it must be the ISO chronology.

In most cases, it is clearer to reverse the calling pattern by using Temporal.minus(TemporalAmount).

   // these two lines are equivalent, but the second approach is recommended
   dateTime = thisPeriod.subtractFrom(dateTime);
   dateTime = dateTime.minus(thisPeriod);
 

The calculation operates as follows. First, the chronology of the temporal is checked to ensure it is ISO chronology or null. Second, if the months are zero, the years are subtracted if non-zero, otherwise the combination of years and months is subtracted if non-zero. Finally, any days are subtracted.

This approach ensures that a partial period can be subtracted from a partial date. For example, a period of years and/or months can be subtracted from a YearMonth, but a period including days cannot. The approach also subtracts years and months together when necessary, which ensures correct behaviour at the end of the month.

This instance is immutable and unaffected by this method call.

toString

public String toString ()

Outputs this period as a String, such as P6Y3M1D.

The output will be in the ISO-8601 period format. A zero period will be represented as zero days, 'P0D'.

toTotalMonths

public long toTotalMonths ()

Gets the total number of months in this period.

This returns the total number of months in the period by multiplying the number of years by 12 and adding the number of months.

This instance is immutable and unaffected by this method call.

withDays

public Period withDays (int days)

Returns a copy of this period with the specified amount of days.

This sets the amount of the days unit in a copy of this period. The years and months units are unaffected.

This instance is immutable and unaffected by this method call.

withMonths

public Period withMonths (int months)

Returns a copy of this period with the specified amount of months.

This sets the amount of the months unit in a copy of this period. The years and days units are unaffected.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

This instance is immutable and unaffected by this method call.

withYears

public Period withYears (int years)

Returns a copy of this period with the specified amount of years.

This sets the amount of the years unit in a copy of this period. The months and days units are unaffected.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

This instance is immutable and unaffected by this method call.