Added in API level 1

Summary: Ctors | Methods | Inherited Methods

TreeSet

public class TreeSet
extends AbstractSet<E> implements Cloneable, NavigableSet<E>, Serializable

java.lang.Object
↳	java.util.AbstractCollection<E>
	↳	java.util.AbstractSet<E>
		↳	java.util.TreeSet<E>

A NavigableSet implementation based on a TreeMap. The elements are ordered using their ordering, or by a Comparator provided at set creation time, depending on which constructor is used.

This implementation provides guaranteed log(n) time cost for the basic operations (add, remove and contains).

Note that the ordering maintained by a set (whether or not an explicit comparator is provided) must be consistent with equals if it is to correctly implement the Set interface. (See Comparable or Comparator for a precise definition of consistent with equals.) This is so because the Set interface is defined in terms of the equals operation, but a TreeSet instance performs all element comparisons using its compareTo (or compare) method, so two elements that are deemed equal by this method are, from the standpoint of the set, equal. The behavior of a set is well-defined even if its ordering is inconsistent with equals; it just fails to obey the general contract of the Set interface.

Note that this implementation is not synchronized. If multiple threads access a tree set concurrently, and at least one of the threads modifies the set, it must be synchronized externally. This is typically accomplished by synchronizing on some object that naturally encapsulates the set. If no such object exists, the set should be "wrapped" using the Collections.synchronizedSortedSet method. This is best done at creation time, to prevent accidental unsynchronized access to the set:

   SortedSet s = Collections.synchronizedSortedSet(new TreeSet(...));

The iterators returned by this class's iterator method are fail-fast: if the set is modified at any time after the iterator is created, in any way except through the iterator's own remove method, the iterator will throw a ConcurrentModificationException. Thus, in the face of concurrent modification, the iterator fails quickly and cleanly, rather than risking arbitrary, non-deterministic behavior at an undetermined time in the future.

Note that the fail-fast behavior of an iterator cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast iterators throw ConcurrentModificationException on a best-effort basis. Therefore, it would be wrong to write a program that depended on this exception for its correctness: the fail-fast behavior of iterators should be used only to detect bugs.

The addFirst and addLast methods of this class throw UnsupportedOperationException. The encounter order of elements is determined by the comparison method; therefore, explicit positioning is not supported.

This class is a member of the Java Collections Framework.

See also:

Summary

Public constructors
`TreeSet()` Constructs a new, empty tree set, sorted according to the natural ordering of its elements.
`TreeSet(Collection<? extends E> c)` Constructs a new tree set containing the elements in the specified collection, sorted according to the natural ordering of its elements.
`TreeSet(Comparator<? super E> comparator)` Constructs a new, empty tree set, sorted according to the specified comparator.
`TreeSet(SortedSet<E> s)` Constructs a new tree set containing the same elements and using the same ordering as the specified sorted set.

Public methods
`boolean`	`add(E e)` Adds the specified element to this set if it is not already present.
`boolean`	`addAll(Collection<? extends E> c)` Adds all of the elements in the specified collection to this set.
`void`	`addFirst(E e)` Throws `UnsupportedOperationException`.
`void`	`addLast(E e)` Throws `UnsupportedOperationException`.
`E`	`ceiling(E e)` Returns the least element in this set greater than or equal to the given element, or `null` if there is no such element.
`void`	`clear()` Removes all of the elements from this set.
`Object`	`clone()` Returns a shallow copy of this `TreeSet` instance.
`Comparator<? super E>`	`comparator()` Returns the comparator used to order the elements in this set, or `null` if this set uses the natural ordering of its elements.
`boolean`	`contains(Object o)` Returns `true` if this set contains the specified element.
`Iterator<E>`	`descendingIterator()` Returns an iterator over the elements in this set in descending order.
`NavigableSet<E>`	`descendingSet()` Returns a reverse order view of the elements contained in this set.
`E`	`first()` Returns the first (lowest) element currently in this set.
`E`	`floor(E e)` Returns the greatest element in this set less than or equal to the given element, or `null` if there is no such element.
`NavigableSet<E>`	`headSet(E toElement, boolean inclusive)` Returns a view of the portion of this set whose elements are less than (or equal to, if `inclusive` is true) `toElement`.
`SortedSet<E>`	`headSet(E toElement)` Returns a view of the portion of this set whose elements are strictly less than `toElement`. Equivalent to `headSet(toElement, false)`.
`E`	`higher(E e)` Returns the least element in this set strictly greater than the given element, or `null` if there is no such element.
`boolean`	`isEmpty()` Returns `true` if this set contains no elements.
`Iterator<E>`	`iterator()` Returns an iterator over the elements in this set in ascending order.
`E`	`last()` Returns the last (highest) element currently in this set.
`E`	`lower(E e)` Returns the greatest element in this set strictly less than the given element, or `null` if there is no such element.
`E`	`pollFirst()` Retrieves and removes the first (lowest) element, or returns `null` if this set is empty.
`E`	`pollLast()` Retrieves and removes the last (highest) element, or returns `null` if this set is empty.
`boolean`	`remove(Object o)` Removes the specified element from this set if it is present.
`int`	`size()` Returns the number of elements in this set (its cardinality).
`Spliterator<E>`	`spliterator()` Creates a late-binding and fail-fast `Spliterator` over the elements in this set.
`NavigableSet<E>`	`subSet(E fromElement, boolean fromInclusive, E toElement, boolean toInclusive)` Returns a view of the portion of this set whose elements range from `fromElement` to `toElement`.
`SortedSet<E>`	`subSet(E fromElement, E toElement)` Returns a view of the portion of this set whose elements range from `fromElement`, inclusive, to `toElement`, exclusive. Equivalent to `subSet(fromElement, true, toElement, false)`.
`NavigableSet<E>`	`tailSet(E fromElement, boolean inclusive)` Returns a view of the portion of this set whose elements are greater than (or equal to, if `inclusive` is true) `fromElement`.
`SortedSet<E>`	`tailSet(E fromElement)` Returns a view of the portion of this set whose elements are greater than or equal to `fromElement`. Equivalent to `tailSet(fromElement, true)`.

Inherited methods

From class


        
          java.util.AbstractSet

`boolean`	`equals(Object o)` Compares the specified object with this set for equality.
`int`	`hashCode()` Returns the hash code value for this set.
`boolean`	`removeAll(Collection<?> c)` Removes from this set all of its elements that are contained in the specified collection (optional operation).

From class


        
          java.util.AbstractCollection

`boolean`	`add(E e)` Ensures that this collection contains the specified element (optional operation).
`boolean`	`addAll(Collection<? extends E> c)` Adds all of the elements in the specified collection to this collection (optional operation).
`void`	`clear()` Removes all of the elements from this collection (optional operation).
`boolean`	`contains(Object o)` Returns `true` if this collection contains the specified element.
`boolean`	`containsAll(Collection<?> c)` Returns `true` if this collection contains all of the elements in the specified collection.
`boolean`	`isEmpty()` Returns `true` if this collection contains no elements.
`abstract Iterator<E>`	`iterator()` Returns an iterator over the elements contained in this collection.
`boolean`	`remove(Object o)` Removes a single instance of the specified element from this collection, if it is present (optional operation).
`boolean`	`removeAll(Collection<?> c)` Removes all of this collection's elements that are also contained in the specified collection (optional operation).
`boolean`	`retainAll(Collection<?> c)` Retains only the elements in this collection that are contained in the specified collection (optional operation).
`abstract int`	`size()` Returns the number of elements in this collection.
`<T> T[]`	`toArray(T[] a)` Returns an array containing all of the elements in this collection; the runtime type of the returned array is that of the specified array.
`Object[]`	`toArray()` Returns an array containing all of the elements in this collection.
`String`	`toString()` Returns a string representation of this collection.

From class


        
          java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long timeoutMillis, int nanos)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait(long timeoutMillis)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait()` Causes the current thread to wait until it is awakened, typically by being notified or interrupted.

From interface


        
          java.util.Set

`abstract boolean`	`add(E e)` Adds the specified element to this set if it is not already present (optional operation).
`abstract boolean`	`addAll(Collection<? extends E> c)` Adds all of the elements in the specified collection to this set if they're not already present (optional operation).
`abstract void`	`clear()` Removes all of the elements from this set (optional operation).
`abstract boolean`	`contains(Object o)` Returns `true` if this set contains the specified element.
`abstract boolean`	`containsAll(Collection<?> c)` Returns `true` if this set contains all of the elements of the specified collection.
`static <E> Set<E>`	`copyOf(Collection<? extends E> coll)` Returns an unmodifiable Set containing the elements of the given Collection.
`abstract boolean`	`equals(Object o)` Compares the specified object with this set for equality.
`abstract int`	`hashCode()` Returns the hash code value for this set.
`abstract boolean`	`isEmpty()` Returns `true` if this set contains no elements.
`abstract Iterator<E>`	`iterator()` Returns an iterator over the elements in this set.
`static <E> Set<E>`	`of(E e1, E e2, E e3)` Returns an unmodifiable set containing three elements.
`static <E> Set<E>`	`of(E e1, E e2, E e3, E e4, E e5, E e6, E e7, E e8, E e9)` Returns an unmodifiable set containing nine elements.
`static <E> Set<E>`	`of(E e1, E e2, E e3, E e4, E e5)` Returns an unmodifiable set containing five elements.
`static <E> Set<E>`	`of(E e1, E e2, E e3, E e4, E e5, E e6)` Returns an unmodifiable set containing six elements.
`static <E> Set<E>`	`of(E e1, E e2, E e3, E e4, E e5, E e6, E e7, E e8)` Returns an unmodifiable set containing eight elements.
`static <E> Set<E>`	`of(E... elements)` Returns an unmodifiable set containing an arbitrary number of elements.
`static <E> Set<E>`	`of()` Returns an unmodifiable set containing zero elements.
`static <E> Set<E>`	`of(E e1, E e2, E e3, E e4, E e5, E e6, E e7, E e8, E e9, E e10)` Returns an unmodifiable set containing ten elements.
`static <E> Set<E>`	`of(E e1, E e2)` Returns an unmodifiable set containing two elements.
`static <E> Set<E>`	`of(E e1, E e2, E e3, E e4, E e5, E e6, E e7)` Returns an unmodifiable set containing seven elements.
`static <E> Set<E>`	`of(E e1, E e2, E e3, E e4)` Returns an unmodifiable set containing four elements.
`static <E> Set<E>`	`of(E e1)` Returns an unmodifiable set containing one element.
`abstract boolean`	`remove(Object o)` Removes the specified element from this set if it is present (optional operation).
`abstract boolean`	`removeAll(Collection<?> c)` Removes from this set all of its elements that are contained in the specified collection (optional operation).
`abstract boolean`	`retainAll(Collection<?> c)` Retains only the elements in this set that are contained in the specified collection (optional operation).
`abstract int`	`size()` Returns the number of elements in this set (its cardinality).
`default Spliterator<E>`	`spliterator()` Creates a `Spliterator` over the elements in this set.
`abstract Object[]`	`toArray()` Returns an array containing all of the elements in this set.
`abstract <T> T[]`	`toArray(T[] a)` Returns an array containing all of the elements in this set; the runtime type of the returned array is that of the specified array.

From interface


        
          java.util.Collection

`abstract boolean`	`add(E e)` Ensures that this collection contains the specified element (optional operation).
`abstract boolean`	`addAll(Collection<? extends E> c)` Adds all of the elements in the specified collection to this collection (optional operation).
`abstract void`	`clear()` Removes all of the elements from this collection (optional operation).
`abstract boolean`	`contains(Object o)` Returns `true` if this collection contains the specified element.
`abstract boolean`	`containsAll(Collection<?> c)` Returns `true` if this collection contains all of the elements in the specified collection.
`abstract boolean`	`equals(Object o)` Compares the specified object with this collection for equality.
`abstract int`	`hashCode()` Returns the hash code value for this collection.
`abstract boolean`	`isEmpty()` Returns `true` if this collection contains no elements.
`abstract Iterator<E>`	`iterator()` Returns an iterator over the elements in this collection.
`default Stream<E>`	`parallelStream()` Returns a possibly parallel `Stream` with this collection as its source.
`abstract boolean`	`remove(Object o)` Removes a single instance of the specified element from this collection, if it is present (optional operation).
`abstract boolean`	`removeAll(Collection<?> c)` Removes all of this collection's elements that are also contained in the specified collection (optional operation).
`default boolean`	`removeIf(Predicate<? super E> filter)` Removes all of the elements of this collection that satisfy the given predicate.
`abstract boolean`	`retainAll(Collection<?> c)` Retains only the elements in this collection that are contained in the specified collection (optional operation).
`abstract int`	`size()` Returns the number of elements in this collection.
`default Spliterator<E>`	`spliterator()` Creates a `Spliterator` over the elements in this collection.
`default Stream<E>`	`stream()` Returns a sequential `Stream` with this collection as its source.
`abstract <T> T[]`	`toArray(T[] a)` Returns an array containing all of the elements in this collection; the runtime type of the returned array is that of the specified array.
`abstract Object[]`	`toArray()` Returns an array containing all of the elements in this collection.
`default <T> T[]`	`toArray(IntFunction<T[]> generator)` Returns an array containing all of the elements in this collection, using the provided `generator` function to allocate the returned array.

From interface


        
          java.util.NavigableSet

`abstract E`	`ceiling(E e)` Returns the least element in this set greater than or equal to the given element, or `null` if there is no such element.
`abstract Iterator<E>`	`descendingIterator()` Returns an iterator over the elements in this set, in descending order.
`abstract NavigableSet<E>`	`descendingSet()` Returns a reverse order view of the elements contained in this set.
`abstract E`	`floor(E e)` Returns the greatest element in this set less than or equal to the given element, or `null` if there is no such element.
`abstract NavigableSet<E>`	`headSet(E toElement, boolean inclusive)` Returns a view of the portion of this set whose elements are less than (or equal to, if `inclusive` is true) `toElement`.
`abstract SortedSet<E>`	`headSet(E toElement)` Returns a view of the portion of this set whose elements are strictly less than `toElement`. Equivalent to `headSet(toElement, false)`.
`abstract E`	`higher(E e)` Returns the least element in this set strictly greater than the given element, or `null` if there is no such element.
`abstract Iterator<E>`	`iterator()` Returns an iterator over the elements in this set, in ascending order.
`abstract E`	`lower(E e)` Returns the greatest element in this set strictly less than the given element, or `null` if there is no such element.
`abstract E`	`pollFirst()` Retrieves and removes the first (lowest) element, or returns `null` if this set is empty.
`abstract E`	`pollLast()` Retrieves and removes the last (highest) element, or returns `null` if this set is empty.
`default E`	`removeFirst()` Removes and returns the first element of this collection (optional operation).
`default E`	`removeLast()` Removes and returns the last element of this collection (optional operation).
`default NavigableSet<E>`	`reversed()` Returns a reverse-ordered view of this collection. This method is equivalent to `descendingSet`.
`abstract NavigableSet<E>`	`subSet(E fromElement, boolean fromInclusive, E toElement, boolean toInclusive)` Returns a view of the portion of this set whose elements range from `fromElement` to `toElement`.
`abstract SortedSet<E>`	`subSet(E fromElement, E toElement)` Returns a view of the portion of this set whose elements range from `fromElement`, inclusive, to `toElement`, exclusive. Equivalent to `subSet(fromElement, true, toElement, false)`.
`abstract SortedSet<E>`	`tailSet(E fromElement)` Returns a view of the portion of this set whose elements are greater than or equal to `fromElement`. Equivalent to `tailSet(fromElement, true)`.
`abstract NavigableSet<E>`	`tailSet(E fromElement, boolean inclusive)` Returns a view of the portion of this set whose elements are greater than (or equal to, if `inclusive` is true) `fromElement`.

From interface


        
          java.lang.Iterable

`default void`	`forEach(Consumer<? super T> action)` Performs the given action for each element of the `Iterable` until all elements have been processed or the action throws an exception.
`abstract Iterator<E>`	`iterator()` Returns an iterator over elements of type `T`.
`default Spliterator<E>`	`spliterator()` Creates a `Spliterator` over the elements described by this `Iterable`.

From interface


        
          java.util.SortedSet

`default void`	`addFirst(E e)` Throws `UnsupportedOperationException`.
`default void`	`addLast(E e)` Throws `UnsupportedOperationException`.
`abstract Comparator<? super E>`	`comparator()` Returns the comparator used to order the elements in this set, or `null` if this set uses the natural ordering of its elements.
`abstract E`	`first()` Returns the first (lowest) element currently in this set.
`default E`	`getFirst()` Gets the first element of this collection.
`default E`	`getLast()` Gets the last element of this collection.
`abstract SortedSet<E>`	`headSet(E toElement)` Returns a view of the portion of this set whose elements are strictly less than `toElement`.
`abstract E`	`last()` Returns the last (highest) element currently in this set.
`default E`	`removeFirst()` Removes and returns the first element of this collection (optional operation).
`default E`	`removeLast()` Removes and returns the last element of this collection (optional operation).
`default SortedSet<E>`	`reversed()` Returns a reverse-ordered view of this collection.
`default Spliterator<E>`	`spliterator()` Creates a `Spliterator` over the elements in this sorted set.
`abstract SortedSet<E>`	`subSet(E fromElement, E toElement)` Returns a view of the portion of this set whose elements range from `fromElement`, inclusive, to `toElement`, exclusive.
`abstract SortedSet<E>`	`tailSet(E fromElement)` Returns a view of the portion of this set whose elements are greater than or equal to `fromElement`.

From interface


        
          java.util.SequencedSet


        abstract
        
        
        
        
        SequencedSet<E>


      reversed()

Returns a reverse-ordered view of this collection.

From interface


        
          java.util.SequencedCollection

`default void`	`addFirst(E e)` Adds an element as the first element of this collection (optional operation).
`default void`	`addLast(E e)` Adds an element as the last element of this collection (optional operation).
`default E`	`getFirst()` Gets the first element of this collection.
`default E`	`getLast()` Gets the last element of this collection.
`default E`	`removeFirst()` Removes and returns the first element of this collection (optional operation).
`default E`	`removeLast()` Removes and returns the last element of this collection (optional operation).
`abstract SequencedCollection<E>`	`reversed()` Returns a reverse-ordered view of this collection.

Public constructors

TreeSet

Added in API level 1

public TreeSet ()

Constructs a new, empty tree set, sorted according to the natural ordering of its elements. All elements inserted into the set must implement the Comparable interface. Furthermore, all such elements must be mutually comparable: e1.compareTo(e2) must not throw a ClassCastException for any elements e1 and e2 in the set. If the user attempts to add an element to the set that violates this constraint (for example, the user attempts to add a string element to a set whose elements are integers), the add call will throw a ClassCastException.

TreeSet

Added in API level 1

public TreeSet (Collection<? extends E> c)

Constructs a new tree set containing the elements in the specified collection, sorted according to the natural ordering of its elements. All elements inserted into the set must implement the Comparable interface. Furthermore, all such elements must be mutually comparable: e1.compareTo(e2) must not throw a ClassCastException for any elements e1 and e2 in the set.

Parameters
`c`	`Collection`: collection whose elements will comprise the new set

Throws
`ClassCastException`	if the elements in `c` are not `Comparable`, or are not mutually comparable
`NullPointerException`	if the specified collection is null

TreeSet

Added in API level 1

public TreeSet (Comparator<? super E> comparator)

Constructs a new, empty tree set, sorted according to the specified comparator. All elements inserted into the set must be mutually comparable by the specified comparator: comparator.compare(e1, e2) must not throw a ClassCastException for any elements e1 and e2 in the set. If the user attempts to add an element to the set that violates this constraint, the add call will throw a ClassCastException.

Parameters
`comparator`	`Comparator`: the comparator that will be used to order this set. If `null`, the ordering of the elements will be used.

TreeSet

Added in API level 1

public TreeSet (SortedSet<E> s)

Constructs a new tree set containing the same elements and using the same ordering as the specified sorted set.

Parameters
`s`	`SortedSet`: sorted set whose elements will comprise the new set

Throws
`NullPointerException`	if the specified sorted set is null

Public methods

add

Added in API level 1

public boolean add (E e)

Adds the specified element to this set if it is not already present. More formally, adds the specified element e to this set if the set contains no element e2 such that Objects.equals(e, e2). If this set already contains the element, the call leaves the set unchanged and returns false.

Parameters
`e`	`E`: element to be added to this set

Returns
`boolean`	`true` if this set did not already contain the specified element

Throws
`ClassCastException`	if the specified object cannot be compared with the elements currently in this set
`NullPointerException`	if the specified element is null and this set uses natural ordering, or its comparator does not permit null elements

addAll

Added in API level 1

public boolean addAll (Collection<? extends E> c)

Adds all of the elements in the specified collection to this set.

Parameters
`c`	`Collection`: collection containing elements to be added to this set

Returns
`boolean`	`true` if this set changed as a result of the call

Throws
`ClassCastException`	if the elements provided cannot be compared with the elements currently in the set
`NullPointerException`	if the specified collection is null or if any element is null and this set uses natural ordering, or its comparator does not permit null elements

addFirst

Added in API level 35

public void addFirst (E e)

Throws UnsupportedOperationException. The encounter order induced by this set's comparison method determines the position of elements, so explicit positioning is not supported.

Parameters
`e`	`E`: the element to be added

Throws
`UnsupportedOperationException`	always

addLast

Added in API level 35

public void addLast (E e)

Throws UnsupportedOperationException. The encounter order induced by this set's comparison method determines the position of elements, so explicit positioning is not supported.

Parameters
`e`	`E`: the element to be added.

Throws
`UnsupportedOperationException`	always

ceiling

Added in API level 9

public E ceiling (E e)

Returns the least element in this set greater than or equal to the given element, or null if there is no such element.

Parameters
`e`	`E`: the value to match

Returns
`E`	the least element greater than or equal to `e`, or `null` if there is no such element

Throws
`ClassCastException`
`NullPointerException`	if the specified element is null and this set uses natural ordering, or its comparator does not permit null elements

clear

Added in API level 1

public void clear ()

Removes all of the elements from this set. The set will be empty after this call returns.

clone

Added in API level 1

public Object clone ()

Returns a shallow copy of this TreeSet instance. (The elements themselves are not cloned.)

Returns
`Object`	a shallow copy of this set

comparator

Added in API level 1

public Comparator<? super E> comparator ()

Returns the comparator used to order the elements in this set, or null if this set uses the natural ordering of its elements.

Returns
`Comparator<? super E>`	the comparator used to order the elements in this set, or `null` if this set uses the natural ordering of its elements

contains

Added in API level 1

public boolean contains (Object o)

Returns true if this set contains the specified element. More formally, returns true if and only if this set contains an element e such that Objects.equals(o, e).

Parameters
`o`	`Object`: object to be checked for containment in this set

Returns
`boolean`	`true` if this set contains the specified element

Throws
`ClassCastException`	if the specified object cannot be compared with the elements currently in the set
`NullPointerException`	if the specified element is null and this set uses natural ordering, or its comparator does not permit null elements

descendingIterator

Added in API level 9

public Iterator<E> descendingIterator ()

Returns an iterator over the elements in this set in descending order.

Returns
`Iterator<E>`	an iterator over the elements in this set in descending order

descendingSet

Added in API level 9

public NavigableSet<E> descendingSet ()

Returns a reverse order view of the elements contained in this set. The descending set is backed by this set, so changes to the set are reflected in the descending set, and vice-versa. If either set is modified while an iteration over either set is in progress (except through the iterator's own remove operation), the results of the iteration are undefined.

The returned set has an ordering equivalent to Collections.reverseOrder(comparator()). The expression s.descendingSet().descendingSet() returns a view of s essentially equivalent to s.

Returns
`NavigableSet<E>`	a reverse order view of this set

first

Added in API level 1

public E first ()

Returns the first (lowest) element currently in this set.

Returns
`E`	the first (lowest) element currently in this set

Throws
`NoSuchElementException`

floor

Added in API level 9

public E floor (E e)

Returns the greatest element in this set less than or equal to the given element, or null if there is no such element.

Parameters
`e`	`E`: the value to match

Returns
`E`	the greatest element less than or equal to `e`, or `null` if there is no such element

Throws
`ClassCastException`
`NullPointerException`	if the specified element is null and this set uses natural ordering, or its comparator does not permit null elements

headSet

Added in API level 9

public NavigableSet<E> headSet (E toElement, 
                boolean inclusive)

Returns a view of the portion of this set whose elements are less than (or equal to, if inclusive is true) toElement. The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.

The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.

Parameters
`toElement`	`E`: high endpoint of the returned set
`inclusive`	`boolean`: `true` if the high endpoint is to be included in the returned view

Returns
`NavigableSet<E>`	a view of the portion of this set whose elements are less than (or equal to, if `inclusive` is true) `toElement`

Throws
`ClassCastException`
`NullPointerException`	if `toElement` is null and this set uses natural ordering, or its comparator does not permit null elements
`IllegalArgumentException`

headSet

Added in API level 1

public SortedSet<E> headSet (E toElement)

Returns a view of the portion of this set whose elements are strictly less than toElement. The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.

The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.

Equivalent to headSet(toElement, false).

Parameters
`toElement`	`E`: high endpoint (exclusive) of the returned set

Returns
`SortedSet<E>`	a view of the portion of this set whose elements are strictly less than `toElement`

Throws
`ClassCastException`
`NullPointerException`	if `toElement` is null and this set uses natural ordering, or its comparator does not permit null elements
`IllegalArgumentException`

higher

Added in API level 9

public E higher (E e)

Returns the least element in this set strictly greater than the given element, or null if there is no such element.

Parameters
`e`	`E`: the value to match

Returns
`E`	the least element greater than `e`, or `null` if there is no such element

Throws
`ClassCastException`
`NullPointerException`	if the specified element is null and this set uses natural ordering, or its comparator does not permit null elements

isEmpty

Added in API level 1

public boolean isEmpty ()

Returns true if this set contains no elements.

Returns
`boolean`	`true` if this set contains no elements

iterator

Added in API level 1

public Iterator<E> iterator ()

Returns an iterator over the elements in this set in ascending order.

Returns
`Iterator<E>`	an iterator over the elements in this set in ascending order

last

Added in API level 1

public E last ()

Returns the last (highest) element currently in this set.

Returns
`E`	the last (highest) element currently in this set

Throws
`NoSuchElementException`

lower

Added in API level 9

public E lower (E e)

Returns the greatest element in this set strictly less than the given element, or null if there is no such element.

Parameters
`e`	`E`: the value to match

Returns
`E`	the greatest element less than `e`, or `null` if there is no such element

Throws
`ClassCastException`
`NullPointerException`	if the specified element is null and this set uses natural ordering, or its comparator does not permit null elements

pollFirst

Added in API level 9

public E pollFirst ()

Retrieves and removes the first (lowest) element, or returns null if this set is empty.

Returns
`E`	the first element, or `null` if this set is empty

pollLast

Added in API level 9

public E pollLast ()

Retrieves and removes the last (highest) element, or returns null if this set is empty.

Returns
`E`	the last element, or `null` if this set is empty

remove

Added in API level 1

public boolean remove (Object o)

Removes the specified element from this set if it is present. More formally, removes an element e such that Objects.equals(o, e), if this set contains such an element. Returns true if this set contained the element (or equivalently, if this set changed as a result of the call). (This set will not contain the element once the call returns.)

Parameters
`o`	`Object`: object to be removed from this set, if present

Returns
`boolean`	`true` if this set contained the specified element

Throws
`ClassCastException`	if the specified object cannot be compared with the elements currently in this set
`NullPointerException`	if the specified element is null and this set uses natural ordering, or its comparator does not permit null elements

size

Added in API level 1

public int size ()

Returns the number of elements in this set (its cardinality).

Returns
`int`	the number of elements in this set (its cardinality)

spliterator

Added in API level 24

public Spliterator<E> spliterator ()

Creates a late-binding and fail-fast Spliterator over the elements in this set.

The Spliterator reports Spliterator.SIZED, Spliterator.DISTINCT, Spliterator.SORTED, and Spliterator.ORDERED. Overriding implementations should document the reporting of additional characteristic values.

The spliterator's comparator (see Spliterator.getComparator()) is null if the tree set's comparator (see comparator()) is null. Otherwise, the spliterator's comparator is the same as or imposes the same total ordering as the tree set's comparator.

Returns
`Spliterator<E>`	a `Spliterator` over the elements in this set

subSet

Added in API level 9

public NavigableSet<E> subSet (E fromElement, 
                boolean fromInclusive, 
                E toElement, 
                boolean toInclusive)

Returns a view of the portion of this set whose elements range from fromElement to toElement. If fromElement and toElement are equal, the returned set is empty unless fromInclusive and toInclusive are both true. The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.

The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.

Parameters
`fromElement`	`E`: low endpoint of the returned set
`fromInclusive`	`boolean`: `true` if the low endpoint is to be included in the returned view
`toElement`	`E`: high endpoint of the returned set
`toInclusive`	`boolean`: `true` if the high endpoint is to be included in the returned view

Returns
`NavigableSet<E>`	a view of the portion of this set whose elements range from `fromElement`, inclusive, to `toElement`, exclusive

Throws
`ClassCastException`
`NullPointerException`	if `fromElement` or `toElement` is null and this set uses natural ordering, or its comparator does not permit null elements
`IllegalArgumentException`

subSet

Added in API level 1

public SortedSet<E> subSet (E fromElement, 
                E toElement)

Returns a view of the portion of this set whose elements range from fromElement, inclusive, to toElement, exclusive. (If fromElement and toElement are equal, the returned set is empty.) The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.

The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.

Equivalent to subSet(fromElement, true, toElement, false).

Parameters
`fromElement`	`E`: low endpoint (inclusive) of the returned set
`toElement`	`E`: high endpoint (exclusive) of the returned set

Returns
`SortedSet<E>`	a view of the portion of this set whose elements range from `fromElement`, inclusive, to `toElement`, exclusive

Throws
`ClassCastException`
`NullPointerException`	if `fromElement` or `toElement` is null and this set uses natural ordering, or its comparator does not permit null elements
`IllegalArgumentException`

tailSet

Added in API level 9

public NavigableSet<E> tailSet (E fromElement, 
                boolean inclusive)

Returns a view of the portion of this set whose elements are greater than (or equal to, if inclusive is true) fromElement. The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.

The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.

Parameters
`fromElement`	`E`: low endpoint of the returned set
`inclusive`	`boolean`: `true` if the low endpoint is to be included in the returned view

Returns
`NavigableSet<E>`	a view of the portion of this set whose elements are greater than or equal to `fromElement`

Throws
`ClassCastException`
`NullPointerException`	if `fromElement` is null and this set uses natural ordering, or its comparator does not permit null elements
`IllegalArgumentException`

tailSet

Added in API level 1

public SortedSet<E> tailSet (E fromElement)

Returns a view of the portion of this set whose elements are greater than or equal to fromElement. The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.

The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.

Equivalent to tailSet(fromElement, true).

Parameters
`fromElement`	`E`: low endpoint (inclusive) of the returned set

Returns
`SortedSet<E>`	a view of the portion of this set whose elements are greater than or equal to `fromElement`

Throws
`ClassCastException`
`NullPointerException`	if `fromElement` is null and this set uses natural ordering, or its comparator does not permit null elements
`IllegalArgumentException`