Added in API level 1

StaticLayout

Kotlin |Java

public class StaticLayout
extends Layout

java.lang.Object
↳	android.text.Layout
	↳	android.text.StaticLayout

StaticLayout is a Layout for text that will not be edited after it is laid out. Use DynamicLayout for text that may change.

This is used by widgets to control text layout. You should not need to use this class directly unless you are implementing your own widget or custom display object, or would be tempted to call Canvas.drawText() directly.

Summary

Nested classes
`class`	`StaticLayout.Builder` Builder for static layouts.

Inherited constants

From class android.text.Layout

`int`	`BREAK_STRATEGY_BALANCED` Value for break strategy indicating balanced line breaking.
`int`	`BREAK_STRATEGY_HIGH_QUALITY` Value for break strategy indicating high quality line breaking, including automatic hyphenation and doing whole-paragraph optimization of line breaks.
`int`	`BREAK_STRATEGY_SIMPLE` Value for break strategy indicating simple line breaking.
`float`	`DEFAULT_LINESPACING_ADDITION`
`float`	`DEFAULT_LINESPACING_MULTIPLIER`
`int`	`DIR_LEFT_TO_RIGHT`
`int`	`DIR_RIGHT_TO_LEFT`
`int`	`HYPHENATION_FREQUENCY_FULL` Value for hyphenation frequency indicating the full amount of automatic hyphenation, typical in typography.
`int`	`HYPHENATION_FREQUENCY_FULL_FAST` Value for hyphenation frequency indicating the full amount of automatic hyphenation with using faster algorithm.
`int`	`HYPHENATION_FREQUENCY_NONE` Value for hyphenation frequency indicating no automatic hyphenation.
`int`	`HYPHENATION_FREQUENCY_NORMAL` Value for hyphenation frequency indicating a light amount of automatic hyphenation, which is a conservative default.
`int`	`HYPHENATION_FREQUENCY_NORMAL_FAST` Value for hyphenation frequency indicating a light amount of automatic hyphenation with using faster algorithm.
`int`	`JUSTIFICATION_MODE_INTER_CHARACTER` Value for justification mode indicating the text is justified by stretching letter spacing.
`int`	`JUSTIFICATION_MODE_INTER_WORD` Value for justification mode indicating the text is justified by stretching word spacing.
`int`	`JUSTIFICATION_MODE_NONE` Value for justification mode indicating no justification.

Inherited fields

From class android.text.Layout

`public static final Layout.TextInclusionStrategy`	`INCLUSION_STRATEGY_ANY_OVERLAP` Strategy which considers a text segment to be inside a rectangle area if the segment bounds intersect the rectangle.
`public static final Layout.TextInclusionStrategy`	`INCLUSION_STRATEGY_CONTAINS_ALL` Strategy which considers a text segment to be inside a rectangle area if the segment bounds are completely contained within the rectangle.
`public static final Layout.TextInclusionStrategy`	`INCLUSION_STRATEGY_CONTAINS_CENTER` Strategy which considers a text segment to be inside a rectangle area if the center of the segment bounds is inside the rectangle.

Public constructors
`StaticLayout(CharSequence source, TextPaint paint, int width, Layout.Alignment align, float spacingmult, float spacingadd, boolean includepad)` This constructor is deprecated. Use `Builder` instead.
`StaticLayout(CharSequence source, int bufstart, int bufend, TextPaint paint, int outerwidth, Layout.Alignment align, float spacingmult, float spacingadd, boolean includepad)` This constructor is deprecated. Use `Builder` instead.
`StaticLayout(CharSequence source, int bufstart, int bufend, TextPaint paint, int outerwidth, Layout.Alignment align, float spacingmult, float spacingadd, boolean includepad, TextUtils.TruncateAt ellipsize, int ellipsizedWidth)` This constructor is deprecated. Use `Builder` instead.

Public methods
`RectF`	`computeDrawingBoundingBox()` Get an actual bounding box that draws text content.
`int`	`getBottomPadding()` Returns the number of extra pixels of descent padding in the bottom line of the Layout.
`int`	`getEllipsisCount(int line)` Returns the number of characters to be ellipsized away, or 0 if no ellipsis is to take place.
`int`	`getEllipsisStart(int line)` Return the offset of the first character to be ellipsized away, relative to the start of the line.
`boolean`	`getLineContainsTab(int line)` Returns whether the specified line contains one or more characters that need to be handled specially, like tabs.
`int`	`getLineCount()` Return the number of lines of text in this layout.
`int`	`getLineDescent(int line)` Return the descent of the specified line(0…getLineCount() - 1).
`final Layout.Directions`	`getLineDirections(int line)` Returns the directional run information for the specified line.
`int`	`getLineForVertical(int vertical)` Get the line number corresponding to the specified vertical position.
`int`	`getLineStart(int line)` Return the text offset of the beginning of the specified line ( 0…getLineCount()).
`int`	`getLineTop(int line)` Return the vertical position of the top of the specified line (0…getLineCount()).
`int`	`getParagraphDirection(int line)` Returns the primary directionality of the paragraph containing the specified line, either 1 for left-to-right lines, or -1 for right-to-left lines (see `DIR_LEFT_TO_RIGHT`, `DIR_RIGHT_TO_LEFT`).
`int`	`getTopPadding()` Returns the (negative) number of extra pixels of ascent padding in the top line of the Layout.

Inherited methods

From class


        
          android.text.Layout

`RectF`	`computeDrawingBoundingBox()` Get an actual bounding box that draws text content.
`void`	`draw(Canvas c)` Draw this Layout on the specified Canvas.
`void`	`draw(Canvas canvas, Path selectionHighlight, Paint selectionHighlightPaint, int cursorOffsetVertical)` Draw this Layout on the specified canvas, with the highlight path drawn between the background and the text.
`void`	`draw(Canvas canvas, List<Path> highlightPaths, List<Paint> highlightPaints, Path selectionPath, Paint selectionPaint, int cursorOffsetVertical)` Draw this layout on the specified canvas.
`void`	`drawBackground(Canvas canvas)` Draw background of this layout.
`void`	`drawText(Canvas canvas)` Draw text part of this layout.
`void`	`fillCharacterBounds(int start, int end, float[] bounds, int boundsStart)` Return the characters' bounds in the given range.
`final Layout.Alignment`	`getAlignment()` Returns the alignment used for creating this layout in pixels.
`abstract int`	`getBottomPadding()` Returns the number of extra pixels of descent padding in the bottom line of the Layout.
`final int`	`getBreakStrategy()` Return the break strategy used for creating this layout.
`void`	`getCursorPath(int point, Path dest, CharSequence editingBuffer)` Fills in the specified Path with a representation of a cursor at the specified offset.
`static float`	`getDesiredWidth(CharSequence source, TextPaint paint)` Return how wide a layout must be in order to display the specified text with one line per paragraph.
`static float`	`getDesiredWidth(CharSequence source, int start, int end, TextPaint paint)` Return how wide a layout must be in order to display the specified text slice with one line per paragraph.
`abstract int`	`getEllipsisCount(int line)` Returns the number of characters to be ellipsized away, or 0 if no ellipsis is to take place.
`abstract int`	`getEllipsisStart(int line)` Return the offset of the first character to be ellipsized away, relative to the start of the line.
`final TextUtils.TruncateAt`	`getEllipsize()` Return the ellipsize option used for creating this layout.
`int`	`getEllipsizedWidth()` Return the width to which this layout is ellipsized.
`int`	`getHeight()` Return the total height of this layout.
`final int`	`getHyphenationFrequency()` Return the hyphenation frequency used for creating this layout.
`final int`	`getJustificationMode()` Return the justification mode used for creating this layout.
`final int[]`	`getLeftIndents()` Return a copy of the left indents used for this layout.
`final int`	`getLineAscent(int line)` Get the ascent of the text on the specified line.
`final int`	`getLineBaseline(int line)` Return the vertical position of the baseline of the specified line.
`int`	`getLineBottom(int line, boolean includeLineSpacing)` Return the vertical position of the bottom of the specified line.
`final int`	`getLineBottom(int line)` Return the vertical position of the bottom of the specified line.
`int`	`getLineBounds(int line, Rect bounds)` Return the baseline for the specified line (0…getLineCount() - 1) If bounds is not null, return the top, left, right, bottom extents of the specified line in it.
`LineBreakConfig`	`getLineBreakConfig()` Gets the `LineBreakConfig` used for creating this layout.
`abstract boolean`	`getLineContainsTab(int line)` Returns whether the specified line contains one or more characters that need to be handled specially, like tabs.
`abstract int`	`getLineCount()` Return the number of lines of text in this layout.
`abstract int`	`getLineDescent(int line)` Return the descent of the specified line(0…getLineCount() - 1).
`abstract Layout.Directions`	`getLineDirections(int line)` Returns the directional run information for the specified line.
`final int`	`getLineEnd(int line)` Return the text offset after the last character on the specified line.
`int`	`getLineForOffset(int offset)` Get the line number on which the specified text offset appears.
`int`	`getLineForVertical(int vertical)` Get the line number corresponding to the specified vertical position.
`float`	`getLineLeft(int line)` Get the leftmost position that should be exposed for horizontal scrolling on the specified line.
`int`	`getLineLetterSpacingUnitCount(int line, boolean includeTrailingWhitespace)` Returns the number of letter spacing unit in the line.
`float`	`getLineMax(int line)` Gets the unsigned horizontal extent of the specified line, including leading margin indent, but excluding trailing whitespace.
`float`	`getLineRight(int line)` Get the rightmost position that should be exposed for horizontal scrolling on the specified line.
`final float`	`getLineSpacingAmount()` Returns the amount added to the line height.
`final float`	`getLineSpacingMultiplier()` Returns the multiplier applied to the line height.
`abstract int`	`getLineStart(int line)` Return the text offset of the beginning of the specified line ( 0…getLineCount()).
`abstract int`	`getLineTop(int line)` Return the vertical position of the top of the specified line (0…getLineCount()).
`int`	`getLineVisibleEnd(int line)` Return the text offset after the last visible character (so whitespace is not counted) on the specified line.
`float`	`getLineWidth(int line)` Gets the unsigned horizontal extent of the specified line, including leading margin indent and trailing whitespace.
`final int`	`getMaxLines()` Return the maximum lines allowed used for creating this layout.
`Paint.FontMetrics`	`getMinimumFontMetrics()` Get the minimum font metrics used for line spacing.
`int`	`getOffsetForHorizontal(int line, float horiz)` Get the character offset on the specified line whose position is closest to the specified horizontal position.
`int`	`getOffsetToLeftOf(int offset)`
`int`	`getOffsetToRightOf(int offset)`
`final TextPaint`	`getPaint()` Return the paint used for creating this layout.
`final Layout.Alignment`	`getParagraphAlignment(int line)` Get the alignment of the specified paragraph, taking into account markup attached to it.
`abstract int`	`getParagraphDirection(int line)` Returns the primary directionality of the paragraph containing the specified line, either 1 for left-to-right lines, or -1 for right-to-left lines (see `DIR_LEFT_TO_RIGHT`, `DIR_RIGHT_TO_LEFT`).
`final int`	`getParagraphLeft(int line)` Get the left edge of the specified paragraph, inset by left margins.
`final int`	`getParagraphRight(int line)` Get the right edge of the specified paragraph, inset by right margins.
`float`	`getPrimaryHorizontal(int offset)` Get the primary horizontal position for the specified text offset.
`int[]`	`getRangeForRect(RectF area, SegmentFinder segmentFinder, Layout.TextInclusionStrategy inclusionStrategy)` Finds the range of text which is inside the specified rectangle area.
`final int[]`	`getRightIndents()` Return a copy of the right indents used for this layout.
`float`	`getSecondaryHorizontal(int offset)` Get the secondary horizontal position for the specified text offset.
`void`	`getSelectionPath(int start, int end, Path dest)` Fills in the specified Path with a representation of a highlight between the specified offsets.
`boolean`	`getShiftDrawingOffsetForStartOverhang()` Returns true if shifting drawing offset for start overhang.
`final float`	`getSpacingAdd()` Returns the amount added to the line height.
`final float`	`getSpacingMultiplier()` Returns the multiplier applied to the line height.
`final CharSequence`	`getText()` Return the text used for creating this layout.
`final TextDirectionHeuristic`	`getTextDirectionHeuristic()` Returns the text direction heuristic used for creating this layout.
`abstract int`	`getTopPadding()` Returns the (negative) number of extra pixels of ascent padding in the top line of the Layout.
`boolean`	`getUseBoundsForWidth()` Returns true if using bounding box as a width, false for using advance as a width.
`final int`	`getWidth()` Return the width used for creating this layout in pixels.
`final void`	`increaseWidthTo(int wid)` Increase the width of this layout to the specified width.
`boolean`	`isFallbackLineSpacingEnabled()` Return true if the fallback line space is enabled in this Layout.
`final boolean`	`isFontPaddingIncluded()` Returns true if this layout is created with increased line height.
`boolean`	`isRtlCharAt(int offset)` Returns true if the character at offset is right to left (RTL).
`final boolean`	`isSpanned()`

From class


        
          java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long timeoutMillis, int nanos)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait(long timeoutMillis)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait()` Causes the current thread to wait until it is awakened, typically by being notified or interrupted.

Public constructors

StaticLayout

Added in API level 1

public StaticLayout (CharSequence source, 
                TextPaint paint, 
                int width, 
                Layout.Alignment align, 
                float spacingmult, 
                float spacingadd, 
                boolean includepad)

This constructor is deprecated.
Use Builder instead.

Parameters
`source`	`CharSequence`
`paint`	`TextPaint`
`width`	`int`
`align`	`Layout.Alignment`
`spacingmult`	`float`
`spacingadd`	`float`
`includepad`	`boolean`

StaticLayout

Added in API level 1

public StaticLayout (CharSequence source, 
                int bufstart, 
                int bufend, 
                TextPaint paint, 
                int outerwidth, 
                Layout.Alignment align, 
                float spacingmult, 
                float spacingadd, 
                boolean includepad)

This constructor is deprecated.
Use Builder instead.

Parameters
`source`	`CharSequence`
`bufstart`	`int`
`bufend`	`int`
`paint`	`TextPaint`
`outerwidth`	`int`
`align`	`Layout.Alignment`
`spacingmult`	`float`
`spacingadd`	`float`
`includepad`	`boolean`

StaticLayout

Added in API level 1

public StaticLayout (CharSequence source, 
                int bufstart, 
                int bufend, 
                TextPaint paint, 
                int outerwidth, 
                Layout.Alignment align, 
                float spacingmult, 
                float spacingadd, 
                boolean includepad, 
                TextUtils.TruncateAt ellipsize, 
                int ellipsizedWidth)

This constructor is deprecated.
Use Builder instead.

Parameters
`source`	`CharSequence`
`bufstart`	`int`
`bufend`	`int`
`paint`	`TextPaint`
`outerwidth`	`int`
`align`	`Layout.Alignment`
`spacingmult`	`float`
`spacingadd`	`float`
`includepad`	`boolean`
`ellipsize`	`TextUtils.TruncateAt`
`ellipsizedWidth`	`int`

Public methods

computeDrawingBoundingBox

Added in API level 35

public RectF computeDrawingBoundingBox ()

Get an actual bounding box that draws text content. Note that the RectF#top and RectF#bottom may be different from the Layout#getLineTop(int) of the first line and Layout#getLineBottom(int) of the last line. The line top and line bottom are calculated based on yMin/yMax or ascent/descent value of font file. On the other hand, the drawing bounding boxes are calculated based on actual glyphs used there.

Returns
`RectF`	This value cannot be `null`.

getBottomPadding

Added in API level 1

public int getBottomPadding ()

Returns the number of extra pixels of descent padding in the bottom line of the Layout.

Returns
`int`

getEllipsisCount

Added in API level 1

public int getEllipsisCount (int line)

Returns the number of characters to be ellipsized away, or 0 if no ellipsis is to take place.

Parameters
`line`	`int`

Returns
`int`

getEllipsisStart

Added in API level 1

public int getEllipsisStart (int line)

Return the offset of the first character to be ellipsized away, relative to the start of the line. (So 0 if the beginning of the line is ellipsized, not getLineStart().)

Parameters
`line`	`int`

Returns
`int`

getLineContainsTab

Added in API level 1

public boolean getLineContainsTab (int line)

Returns whether the specified line contains one or more characters that need to be handled specially, like tabs.

Parameters
`line`	`int`

Returns
`boolean`

getLineCount

Added in API level 1

public int getLineCount ()

Return the number of lines of text in this layout.

Returns
`int`

getLineDescent

Added in API level 1

public int getLineDescent (int line)

Return the descent of the specified line(0…getLineCount() - 1).

Parameters
`line`	`int`

Returns
`int`

getLineDirections

Added in API level 1

public final Layout.Directions getLineDirections (int line)

Returns the directional run information for the specified line. The array alternates counts of characters in left-to-right and right-to-left segments of the line.

NOTE: this is inadequate to support bidirectional text, and will change.

Parameters
`line`	`int`

Returns
`Layout.Directions`

getLineForVertical

Added in API level 1

public int getLineForVertical (int vertical)

Get the line number corresponding to the specified vertical position. If you ask for a position above 0, you get 0; if you ask for a position below the bottom of the text, you get the last line.

Parameters
`vertical`	`int`

Returns
`int`

getLineStart

Added in API level 1

public int getLineStart (int line)

Return the text offset of the beginning of the specified line ( 0…getLineCount()). If the specified line is equal to the line count, returns the length of the text.

Parameters
`line`	`int`

Returns
`int`

getLineTop

Added in API level 1

public int getLineTop (int line)

Return the vertical position of the top of the specified line (0…getLineCount()). If the specified line is equal to the line count, returns the bottom of the last line.

Parameters
`line`	`int`

Returns
`int`

getParagraphDirection

Added in API level 1

public int getParagraphDirection (int line)

Returns the primary directionality of the paragraph containing the specified line, either 1 for left-to-right lines, or -1 for right-to-left lines (see DIR_LEFT_TO_RIGHT, DIR_RIGHT_TO_LEFT).

Parameters
`line`	`int`

Returns
`int`

getTopPadding

Added in API level 1

public int getTopPadding ()

Returns the (negative) number of extra pixels of ascent padding in the top line of the Layout.

Returns
`int`

StaticLayout

Summary

Nested classes

Inherited constants

Inherited fields

Public constructors

Public methods

Inherited methods

Public constructors

StaticLayout

StaticLayout

StaticLayout

Public methods

computeDrawingBoundingBox

getBottomPadding

getEllipsisCount

getEllipsisStart

getLineContainsTab

getLineCount

getLineDescent

getLineDirections

getLineForVertical

getLineStart

getLineTop

getParagraphDirection

getTopPadding