Added in API level 1

Character

public final class Character
extends Object implements Comparable<Character>, Serializable

java.lang.Object
↳	java.lang.Character

The Character class wraps a value of the primitive type char in an object. An object of class Character contains a single field whose type is char.

In addition, this class provides several methods for determining a character's category (lowercase letter, digit, etc.) and for converting characters from uppercase to lowercase and vice versa.

Character information is based on the Unicode Standard

The methods and data of class Character are defined by the information in the UnicodeData file that is part of the Unicode Character Database maintained by the Unicode Consortium. This file specifies various properties including name and general category for every defined Unicode code point or character range.

The file and its description are available from the Unicode Consortium at:

http://www.unicode.org

Unicode Conformance

The fields and methods of class Character are defined in terms of character information from the Unicode Standard, specifically the UnicodeData file that is part of the Unicode Character Database. This file specifies properties including name and category for every assigned Unicode code point or character range. The file is available from the Unicode Consortium at http://www.unicode.org.

Character information is based on the Unicode Standard, version 13.0.

The Java platform has supported different versions of the Unicode Standard over time. Upgrades to newer versions of the Unicode Standard occurred in the following Java releases, each indicating the new version:

Shows Java releases and supported Unicode versions
Java release	Unicode version
Java SE 15	Unicode 13.0
Java SE 13	Unicode 12.1
Java SE 12	Unicode 11.0
Java SE 11	Unicode 10.0
Java SE 9	Unicode 8.0
Java SE 8	Unicode 6.2
Java SE 7	Unicode 6.0
Java SE 5.0	Unicode 4.0
Java SE 1.4	Unicode 3.0
JDK 1.1	Unicode 2.0
JDK 1.0.2	Unicode 1.1.5

Variations from these base Unicode versions, such as recognized appendixes, are documented elsewhere.

Unicode Character Representations

The char data type (and therefore the value that a Character object encapsulates) are based on the original Unicode specification, which defined characters as fixed-width 16-bit entities. The Unicode Standard has since been changed to allow for characters whose representation requires more than 16 bits. The range of legal code points is now U+0000 to U+10FFFF, known as Unicode scalar value. (Refer to the definition of the U+n notation in the Unicode Standard.)

The set of characters from U+0000 to U+FFFF is sometimes referred to as the Basic Multilingual Plane (BMP). Characters whose code points are greater than U+FFFF are called supplementary characters. The Java platform uses the UTF-16 representation in char arrays and in the String and StringBuffer classes. In this representation, supplementary characters are represented as a pair of char values, the first from the high-surrogates range, (\uD800-\uDBFF), the second from the low-surrogates range (\uDC00-\uDFFF).

A char value, therefore, represents Basic Multilingual Plane (BMP) code points, including the surrogate code points, or code units of the UTF-16 encoding. An int value represents all Unicode code points, including supplementary code points. The lower (least significant) 21 bits of int are used to represent Unicode code points and the upper (most significant) 11 bits must be zero. Unless otherwise specified, the behavior with respect to supplementary characters and surrogate char values is as follows:

The methods that only accept a char value cannot support supplementary characters. They treat char values from the surrogate ranges as undefined characters. For example, Character.isLetter('\uD840') returns false, even though this specific value if followed by any low-surrogate value in a string would represent a letter.
The methods that accept an int value support all Unicode characters, including supplementary characters. For example, Character.isLetter(0x2F81A) returns true because the code point value represents a letter (a CJK ideograph).

In the Java SE API documentation, Unicode code point is used for character values in the range between U+0000 and U+10FFFF, and Unicode code unit is used for 16-bit char values that are code units of the UTF-16 encoding. For more information on Unicode terminology, refer to the Unicode Glossary.

Summary

Nested classes
`class`	`Character.Subset` Instances of this class represent particular subsets of the Unicode character set.
`class`	`Character.UnicodeBlock` A family of character subsets representing the character blocks in the Unicode specification.

Constants
`int`	`BYTES` The number of bytes used to represent a `char` value in unsigned binary form.
`byte`	`COMBINING_SPACING_MARK` General category "Mc" in the Unicode specification.
`byte`	`CONNECTOR_PUNCTUATION` General category "Pc" in the Unicode specification.
`byte`	`CONTROL` General category "Cc" in the Unicode specification.
`byte`	`CURRENCY_SYMBOL` General category "Sc" in the Unicode specification.
`byte`	`DASH_PUNCTUATION` General category "Pd" in the Unicode specification.
`byte`	`DECIMAL_DIGIT_NUMBER` General category "Nd" in the Unicode specification.
`byte`	`DIRECTIONALITY_ARABIC_NUMBER` Weak bidirectional character type "AN" in the Unicode specification.
`byte`	`DIRECTIONALITY_BOUNDARY_NEUTRAL` Weak bidirectional character type "BN" in the Unicode specification.
`byte`	`DIRECTIONALITY_COMMON_NUMBER_SEPARATOR` Weak bidirectional character type "CS" in the Unicode specification.
`byte`	`DIRECTIONALITY_EUROPEAN_NUMBER` Weak bidirectional character type "EN" in the Unicode specification.
`byte`	`DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR` Weak bidirectional character type "ES" in the Unicode specification.
`byte`	`DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR` Weak bidirectional character type "ET" in the Unicode specification.
`byte`	`DIRECTIONALITY_FIRST_STRONG_ISOLATE` Weak bidirectional character type "FSI" in the Unicode specification.
`byte`	`DIRECTIONALITY_LEFT_TO_RIGHT` Strong bidirectional character type "L" in the Unicode specification.
`byte`	`DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING` Strong bidirectional character type "LRE" in the Unicode specification.
`byte`	`DIRECTIONALITY_LEFT_TO_RIGHT_ISOLATE` Weak bidirectional character type "LRI" in the Unicode specification.
`byte`	`DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE` Strong bidirectional character type "LRO" in the Unicode specification.
`byte`	`DIRECTIONALITY_NONSPACING_MARK` Weak bidirectional character type "NSM" in the Unicode specification.
`byte`	`DIRECTIONALITY_OTHER_NEUTRALS` Neutral bidirectional character type "ON" in the Unicode specification.
`byte`	`DIRECTIONALITY_PARAGRAPH_SEPARATOR` Neutral bidirectional character type "B" in the Unicode specification.
`byte`	`DIRECTIONALITY_POP_DIRECTIONAL_FORMAT` Weak bidirectional character type "PDF" in the Unicode specification.
`byte`	`DIRECTIONALITY_POP_DIRECTIONAL_ISOLATE` Weak bidirectional character type "PDI" in the Unicode specification.
`byte`	`DIRECTIONALITY_RIGHT_TO_LEFT` Strong bidirectional character type "R" in the Unicode specification.
`byte`	`DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC` Strong bidirectional character type "AL" in the Unicode specification.
`byte`	`DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING` Strong bidirectional character type "RLE" in the Unicode specification.
`byte`	`DIRECTIONALITY_RIGHT_TO_LEFT_ISOLATE` Weak bidirectional character type "RLI" in the Unicode specification.
`byte`	`DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE` Strong bidirectional character type "RLO" in the Unicode specification.
`byte`	`DIRECTIONALITY_SEGMENT_SEPARATOR` Neutral bidirectional character type "S" in the Unicode specification.
`byte`	`DIRECTIONALITY_UNDEFINED` Undefined bidirectional character type.
`byte`	`DIRECTIONALITY_WHITESPACE` Neutral bidirectional character type "WS" in the Unicode specification.
`byte`	`ENCLOSING_MARK` General category "Me" in the Unicode specification.
`byte`	`END_PUNCTUATION` General category "Pe" in the Unicode specification.
`byte`	`FINAL_QUOTE_PUNCTUATION` General category "Pf" in the Unicode specification.
`byte`	`FORMAT` General category "Cf" in the Unicode specification.
`byte`	`INITIAL_QUOTE_PUNCTUATION` General category "Pi" in the Unicode specification.
`byte`	`LETTER_NUMBER` General category "Nl" in the Unicode specification.
`byte`	`LINE_SEPARATOR` General category "Zl" in the Unicode specification.
`byte`	`LOWERCASE_LETTER` General category "Ll" in the Unicode specification.
`byte`	`MATH_SYMBOL` General category "Sm" in the Unicode specification.
`int`	`MAX_CODE_POINT` The maximum value of a Unicode code point, constant `U+10FFFF`.
`char`	`MAX_HIGH_SURROGATE` The maximum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant `'\uDBFF'`.
`char`	`MAX_LOW_SURROGATE` The maximum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant `'\uDFFF'`.
`int`	`MAX_RADIX` The maximum radix available for conversion to and from strings.
`char`	`MAX_SURROGATE` The maximum value of a Unicode surrogate code unit in the UTF-16 encoding, constant `'\uDFFF'`.
`char`	`MAX_VALUE` The constant value of this field is the largest value of type `char`, `'\uFFFF'`.
`int`	`MIN_CODE_POINT` The minimum value of a Unicode code point, constant `U+0000`.
`char`	`MIN_HIGH_SURROGATE` The minimum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant `'\uD800'`.
`char`	`MIN_LOW_SURROGATE` The minimum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant `'\uDC00'`.
`int`	`MIN_RADIX` The minimum radix available for conversion to and from strings.
`int`	`MIN_SUPPLEMENTARY_CODE_POINT` The minimum value of a Unicode supplementary code point, constant `U+10000`.
`char`	`MIN_SURROGATE` The minimum value of a Unicode surrogate code unit in the UTF-16 encoding, constant `'\uD800'`.
`char`	`MIN_VALUE` The constant value of this field is the smallest value of type `char`, `'\u0000'`.
`byte`	`MODIFIER_LETTER` General category "Lm" in the Unicode specification.
`byte`	`MODIFIER_SYMBOL` General category "Sk" in the Unicode specification.
`byte`	`NON_SPACING_MARK` General category "Mn" in the Unicode specification.
`byte`	`OTHER_LETTER` General category "Lo" in the Unicode specification.
`byte`	`OTHER_NUMBER` General category "No" in the Unicode specification.
`byte`	`OTHER_PUNCTUATION` General category "Po" in the Unicode specification.
`byte`	`OTHER_SYMBOL` General category "So" in the Unicode specification.
`byte`	`PARAGRAPH_SEPARATOR` General category "Zp" in the Unicode specification.
`byte`	`PRIVATE_USE` General category "Co" in the Unicode specification.
`int`	`SIZE` The number of bits used to represent a `char` value in unsigned binary form, constant `16`.
`byte`	`SPACE_SEPARATOR` General category "Zs" in the Unicode specification.
`byte`	`START_PUNCTUATION` General category "Ps" in the Unicode specification.
`byte`	`SURROGATE` General category "Cs" in the Unicode specification.
`byte`	`TITLECASE_LETTER` General category "Lt" in the Unicode specification.
`byte`	`UNASSIGNED` General category "Cn" in the Unicode specification.
`byte`	`UPPERCASE_LETTER` General category "Lu" in the Unicode specification.

Fields
`public static final Class<Character>`	`TYPE` The `Class` instance representing the primitive type `char`.

Public constructors
`Character(char value)` This constructor is deprecated. It is rarely appropriate to use this constructor. The static factory `valueOf(char)` is generally a better choice, as it is likely to yield significantly better space and time performance.

Public methods
`static int`	`charCount(int codePoint)` Determines the number of `char` values needed to represent the specified character (Unicode code point).
`char`	`charValue()` Returns the value of this `Character` object.
`static int`	`codePointAt(char[] a, int index, int limit)` Returns the code point at the given index of the `char` array, where only array elements with `index` less than `limit` can be used.
`static int`	`codePointAt(char[] a, int index)` Returns the code point at the given index of the `char` array.
`static int`	`codePointAt(CharSequence seq, int index)` Returns the code point at the given index of the `CharSequence`.
`static int`	`codePointBefore(char[] a, int index)` Returns the code point preceding the given index of the `char` array.
`static int`	`codePointBefore(CharSequence seq, int index)` Returns the code point preceding the given index of the `CharSequence`.
`static int`	`codePointBefore(char[] a, int index, int start)` Returns the code point preceding the given index of the `char` array, where only array elements with `index` greater than or equal to `start` can be used.
`static int`	`codePointCount(CharSequence seq, int beginIndex, int endIndex)` Returns the number of Unicode code points in the text range of the specified char sequence.
`static int`	`codePointCount(char[] a, int offset, int count)` Returns the number of Unicode code points in a subarray of the `char` array argument.
`static int`	`codePointOf(String name)` Returns the code point value of the Unicode character specified by the given Unicode character name.
`static int`	`compare(char x, char y)` Compares two `char` values numerically.
`int`	`compareTo(Character anotherCharacter)` Compares two `Character` objects numerically.
`static int`	`digit(int codePoint, int radix)` Returns the numeric value of the specified character (Unicode code point) in the specified radix.
`static int`	`digit(char ch, int radix)` Returns the numeric value of the character `ch` in the specified radix.
`boolean`	`equals(Object obj)` Compares this object against the specified object.
`static char`	`forDigit(int digit, int radix)` Determines the character representation for a specific digit in the specified radix.
`static byte`	`getDirectionality(char ch)` Returns the Unicode directionality property for the given character.
`static byte`	`getDirectionality(int codePoint)` Returns the Unicode directionality property for the given character (Unicode code point).
`static String`	`getName(int codePoint)` Returns the Unicode name of the specified character `codePoint`, or null if the code point is `unassigned`.
`static int`	`getNumericValue(int codePoint)` Returns the `int` value that the specified character (Unicode code point) represents.
`static int`	`getNumericValue(char ch)` Returns the `int` value that the specified Unicode character represents.
`static int`	`getType(char ch)` Returns a value indicating a character's general category.
`static int`	`getType(int codePoint)` Returns a value indicating a character's general category.
`static int`	`hashCode(char value)` Returns a hash code for a `char` value; compatible with `Character.hashCode()`.
`int`	`hashCode()` Returns a hash code for this `Character`; equal to the result of invoking `charValue()`.
`static char`	`highSurrogate(int codePoint)` Returns the leading surrogate (a high surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding.
`static boolean`	`isAlphabetic(int codePoint)` Determines if the specified character (Unicode code point) is alphabetic.
`static boolean`	`isBmpCodePoint(int codePoint)` Determines whether the specified character (Unicode code point) is in the Basic Multilingual Plane (BMP).
`static boolean`	`isDefined(int codePoint)` Determines if a character (Unicode code point) is defined in Unicode.
`static boolean`	`isDefined(char ch)` Determines if a character is defined in Unicode.
`static boolean`	`isDigit(char ch)` Determines if the specified character is a digit.
`static boolean`	`isDigit(int codePoint)` Determines if the specified character (Unicode code point) is a digit.
`static boolean`	`isHighSurrogate(char ch)` Determines if the given `char` value is a Unicode high-surrogate code unit (also known as leading-surrogate code unit).
`static boolean`	`isISOControl(char ch)` Determines if the specified character is an ISO control character.
`static boolean`	`isISOControl(int codePoint)` Determines if the referenced character (Unicode code point) is an ISO control character.
`static boolean`	`isIdentifierIgnorable(char ch)` Determines if the specified character should be regarded as an ignorable character in a Java identifier or a Unicode identifier.
`static boolean`	`isIdentifierIgnorable(int codePoint)` Determines if the specified character (Unicode code point) should be regarded as an ignorable character in a Java identifier or a Unicode identifier.
`static boolean`	`isIdeographic(int codePoint)` Determines if the specified character (Unicode code point) is a CJKV (Chinese, Japanese, Korean and Vietnamese) ideograph, as defined by the Unicode Standard.
`static boolean`	`isJavaIdentifierPart(char ch)` Determines if the specified character may be part of a Java identifier as other than the first character.
`static boolean`	`isJavaIdentifierPart(int codePoint)` Determines if the character (Unicode code point) may be part of a Java identifier as other than the first character.
`static boolean`	`isJavaIdentifierStart(int codePoint)` Determines if the character (Unicode code point) is permissible as the first character in a Java identifier.
`static boolean`	`isJavaIdentifierStart(char ch)` Determines if the specified character is permissible as the first character in a Java identifier.
`static boolean`	`isJavaLetter(char ch)` This method was deprecated in API level 15. Replaced by isJavaIdentifierStart(char).
`static boolean`	`isJavaLetterOrDigit(char ch)` This method was deprecated in API level 15. Replaced by isJavaIdentifierPart(char).
`static boolean`	`isLetter(char ch)` Determines if the specified character is a letter.
`static boolean`	`isLetter(int codePoint)` Determines if the specified character (Unicode code point) is a letter.
`static boolean`	`isLetterOrDigit(char ch)` Determines if the specified character is a letter or digit.
`static boolean`	`isLetterOrDigit(int codePoint)` Determines if the specified character (Unicode code point) is a letter or digit.
`static boolean`	`isLowSurrogate(char ch)` Determines if the given `char` value is a Unicode low-surrogate code unit (also known as trailing-surrogate code unit).
`static boolean`	`isLowerCase(char ch)` Determines if the specified character is a lowercase character.
`static boolean`	`isLowerCase(int codePoint)` Determines if the specified character (Unicode code point) is a lowercase character.
`static boolean`	`isMirrored(int codePoint)` Determines whether the specified character (Unicode code point) is mirrored according to the Unicode specification.
`static boolean`	`isMirrored(char ch)` Determines whether the character is mirrored according to the Unicode specification.
`static boolean`	`isSpace(char ch)` This method was deprecated in API level 15. Replaced by isWhitespace(char).
`static boolean`	`isSpaceChar(char ch)` Determines if the specified character is a Unicode space character.
`static boolean`	`isSpaceChar(int codePoint)` Determines if the specified character (Unicode code point) is a Unicode space character.
`static boolean`	`isSupplementaryCodePoint(int codePoint)` Determines whether the specified character (Unicode code point) is in the supplementary character range.
`static boolean`	`isSurrogate(char ch)` Determines if the given `char` value is a Unicode surrogate code unit.
`static boolean`	`isSurrogatePair(char high, char low)` Determines whether the specified pair of `char` values is a valid Unicode surrogate pair.
`static boolean`	`isTitleCase(int codePoint)` Determines if the specified character (Unicode code point) is a titlecase character.
`static boolean`	`isTitleCase(char ch)` Determines if the specified character is a titlecase character.
`static boolean`	`isUnicodeIdentifierPart(int codePoint)` Determines if the specified character (Unicode code point) may be part of a Unicode identifier as other than the first character.
`static boolean`	`isUnicodeIdentifierPart(char ch)` Determines if the specified character may be part of a Unicode identifier as other than the first character.
`static boolean`	`isUnicodeIdentifierStart(int codePoint)` Determines if the specified character (Unicode code point) is permissible as the first character in a Unicode identifier.
`static boolean`	`isUnicodeIdentifierStart(char ch)` Determines if the specified character is permissible as the first character in a Unicode identifier.
`static boolean`	`isUpperCase(char ch)` Determines if the specified character is an uppercase character.
`static boolean`	`isUpperCase(int codePoint)` Determines if the specified character (Unicode code point) is an uppercase character.
`static boolean`	`isValidCodePoint(int codePoint)` Determines whether the specified code point is a valid Unicode code point value.
`static boolean`	`isWhitespace(int codePoint)` Determines if the specified character (Unicode code point) is white space according to Java.
`static boolean`	`isWhitespace(char ch)` Determines if the specified character is white space according to Java.
`static char`	`lowSurrogate(int codePoint)` Returns the trailing surrogate (a low surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding.
`static int`	`offsetByCodePoints(CharSequence seq, int index, int codePointOffset)` Returns the index within the given char sequence that is offset from the given `index` by `codePointOffset` code points.
`static int`	`offsetByCodePoints(char[] a, int start, int count, int index, int codePointOffset)` Returns the index within the given `char` subarray that is offset from the given `index` by `codePointOffset` code points.
`static char`	`reverseBytes(char ch)` Returns the value obtained by reversing the order of the bytes in the specified `char` value.
`static int`	`toChars(int codePoint, char[] dst, int dstIndex)` Converts the specified character (Unicode code point) to its UTF-16 representation.
`static char[]`	`toChars(int codePoint)` Converts the specified character (Unicode code point) to its UTF-16 representation stored in a `char` array.
`static int`	`toCodePoint(char high, char low)` Converts the specified surrogate pair to its supplementary code point value.
`static int`	`toLowerCase(int codePoint)` Converts the character (Unicode code point) argument to lowercase using case mapping information from the UnicodeData file.
`static char`	`toLowerCase(char ch)` Converts the character argument to lowercase using case mapping information from the UnicodeData file.
`String`	`toString()` Returns a `String` object representing this `Character`'s value.
`static String`	`toString(char c)` Returns a `String` object representing the specified `char`.
`static String`	`toString(int codePoint)` Returns a `String` object representing the specified character (Unicode code point).
`static char`	`toTitleCase(char ch)` Converts the character argument to titlecase using case mapping information from the UnicodeData file.
`static int`	`toTitleCase(int codePoint)` Converts the character (Unicode code point) argument to titlecase using case mapping information from the UnicodeData file.
`static char`	`toUpperCase(char ch)` Converts the character argument to uppercase using case mapping information from the UnicodeData file.
`static int`	`toUpperCase(int codePoint)` Converts the character (Unicode code point) argument to uppercase using case mapping information from the UnicodeData file.
`static Character`	`valueOf(char c)` Returns a `Character` instance representing the specified `char` value.

Inherited methods

From class


        
          java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long timeoutMillis, int nanos)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait(long timeoutMillis)` Causes the current thread to wait until it is awakened, typically by being notified or interrupted, or until a certain amount of real time has elapsed.
`final void`	`wait()` Causes the current thread to wait until it is awakened, typically by being notified or interrupted.

From interface


        
          java.lang.Comparable


      compareTo(Character o)

Compares this object with the specified object for order.

Constants

BYTES

Added in API level 24

public static final int BYTES

The number of bytes used to represent a char value in unsigned binary form.

Constant Value: 2 (0x00000002)

COMBINING_SPACING_MARK

Added in API level 1

public static final byte COMBINING_SPACING_MARK

General category "Mc" in the Unicode specification.

Constant Value: 8 (0x00000008)

CONNECTOR_PUNCTUATION

Added in API level 1

public static final byte CONNECTOR_PUNCTUATION

General category "Pc" in the Unicode specification.

Constant Value: 23 (0x00000017)

CONTROL

Added in API level 1

public static final byte CONTROL

General category "Cc" in the Unicode specification.

Constant Value: 15 (0x0000000f)

CURRENCY_SYMBOL

Added in API level 1

public static final byte CURRENCY_SYMBOL

General category "Sc" in the Unicode specification.

Constant Value: 26 (0x0000001a)

DASH_PUNCTUATION

Added in API level 1

public static final byte DASH_PUNCTUATION

General category "Pd" in the Unicode specification.

Constant Value: 20 (0x00000014)

DECIMAL_DIGIT_NUMBER

Added in API level 1

public static final byte DECIMAL_DIGIT_NUMBER

General category "Nd" in the Unicode specification.

Constant Value: 9 (0x00000009)

DIRECTIONALITY_ARABIC_NUMBER

Added in API level 1

public static final byte DIRECTIONALITY_ARABIC_NUMBER

Weak bidirectional character type "AN" in the Unicode specification.

Constant Value: 6 (0x00000006)

DIRECTIONALITY_BOUNDARY_NEUTRAL

Added in API level 1

public static final byte DIRECTIONALITY_BOUNDARY_NEUTRAL

Weak bidirectional character type "BN" in the Unicode specification.

Constant Value: 9 (0x00000009)

DIRECTIONALITY_COMMON_NUMBER_SEPARATOR

Added in API level 1

public static final byte DIRECTIONALITY_COMMON_NUMBER_SEPARATOR

Weak bidirectional character type "CS" in the Unicode specification.

Constant Value: 7 (0x00000007)

DIRECTIONALITY_EUROPEAN_NUMBER

Added in API level 1

public static final byte DIRECTIONALITY_EUROPEAN_NUMBER

Weak bidirectional character type "EN" in the Unicode specification.

Constant Value: 3 (0x00000003)

DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR

Added in API level 1

public static final byte DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR

Weak bidirectional character type "ES" in the Unicode specification.

Constant Value: 4 (0x00000004)

DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR

Added in API level 1

public static final byte DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR

Weak bidirectional character type "ET" in the Unicode specification.

Constant Value: 5 (0x00000005)

DIRECTIONALITY_FIRST_STRONG_ISOLATE

Added in API level 34

public static final byte DIRECTIONALITY_FIRST_STRONG_ISOLATE

Weak bidirectional character type "FSI" in the Unicode specification.

Constant Value: 21 (0x00000015)

DIRECTIONALITY_LEFT_TO_RIGHT

Added in API level 1

public static final byte DIRECTIONALITY_LEFT_TO_RIGHT

Strong bidirectional character type "L" in the Unicode specification.

Constant Value: 0 (0x00000000)

DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING

Added in API level 1

public static final byte DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING

Strong bidirectional character type "LRE" in the Unicode specification.

Constant Value: 14 (0x0000000e)

DIRECTIONALITY_LEFT_TO_RIGHT_ISOLATE

Added in API level 34

public static final byte DIRECTIONALITY_LEFT_TO_RIGHT_ISOLATE

Weak bidirectional character type "LRI" in the Unicode specification.

Constant Value: 19 (0x00000013)

DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE

Added in API level 1

public static final byte DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE

Strong bidirectional character type "LRO" in the Unicode specification.

Constant Value: 15 (0x0000000f)

DIRECTIONALITY_NONSPACING_MARK

Added in API level 1

public static final byte DIRECTIONALITY_NONSPACING_MARK

Weak bidirectional character type "NSM" in the Unicode specification.

Constant Value: 8 (0x00000008)

DIRECTIONALITY_OTHER_NEUTRALS

Added in API level 1

public static final byte DIRECTIONALITY_OTHER_NEUTRALS

Neutral bidirectional character type "ON" in the Unicode specification.

Constant Value: 13 (0x0000000d)

DIRECTIONALITY_PARAGRAPH_SEPARATOR

Added in API level 1

public static final byte DIRECTIONALITY_PARAGRAPH_SEPARATOR

Neutral bidirectional character type "B" in the Unicode specification.

Constant Value: 10 (0x0000000a)

DIRECTIONALITY_POP_DIRECTIONAL_FORMAT

Added in API level 1

public static final byte DIRECTIONALITY_POP_DIRECTIONAL_FORMAT

Weak bidirectional character type "PDF" in the Unicode specification.

Constant Value: 18 (0x00000012)

DIRECTIONALITY_POP_DIRECTIONAL_ISOLATE

Added in API level 34

public static final byte DIRECTIONALITY_POP_DIRECTIONAL_ISOLATE

Weak bidirectional character type "PDI" in the Unicode specification.

Constant Value: 22 (0x00000016)

DIRECTIONALITY_RIGHT_TO_LEFT

Added in API level 1

public static final byte DIRECTIONALITY_RIGHT_TO_LEFT

Strong bidirectional character type "R" in the Unicode specification.

Constant Value: 1 (0x00000001)

DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC

Added in API level 1

public static final byte DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC

Strong bidirectional character type "AL" in the Unicode specification.

Constant Value: 2 (0x00000002)

DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING

Added in API level 1

public static final byte DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING

Strong bidirectional character type "RLE" in the Unicode specification.

Constant Value: 16 (0x00000010)

DIRECTIONALITY_RIGHT_TO_LEFT_ISOLATE

Added in API level 34

public static final byte DIRECTIONALITY_RIGHT_TO_LEFT_ISOLATE

Weak bidirectional character type "RLI" in the Unicode specification.

Constant Value: 20 (0x00000014)

DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE

Added in API level 1

public static final byte DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE

Strong bidirectional character type "RLO" in the Unicode specification.

Constant Value: 17 (0x00000011)

DIRECTIONALITY_SEGMENT_SEPARATOR

Added in API level 1

public static final byte DIRECTIONALITY_SEGMENT_SEPARATOR

Neutral bidirectional character type "S" in the Unicode specification.

Constant Value: 11 (0x0000000b)

DIRECTIONALITY_UNDEFINED

Added in API level 1

public static final byte DIRECTIONALITY_UNDEFINED

Undefined bidirectional character type. Undefined char values have undefined directionality in the Unicode specification.

Constant Value: -1 (0xffffffff)

DIRECTIONALITY_WHITESPACE

Added in API level 1

public static final byte DIRECTIONALITY_WHITESPACE

Neutral bidirectional character type "WS" in the Unicode specification.

Constant Value: 12 (0x0000000c)

ENCLOSING_MARK

Added in API level 1

public static final byte ENCLOSING_MARK

General category "Me" in the Unicode specification.

Constant Value: 7 (0x00000007)

END_PUNCTUATION

Added in API level 1

public static final byte END_PUNCTUATION

General category "Pe" in the Unicode specification.

Constant Value: 22 (0x00000016)

FINAL_QUOTE_PUNCTUATION

Added in API level 1

public static final byte FINAL_QUOTE_PUNCTUATION

General category "Pf" in the Unicode specification.

Constant Value: 30 (0x0000001e)

FORMAT

Added in API level 1

public static final byte FORMAT

General category "Cf" in the Unicode specification.

Constant Value: 16 (0x00000010)

INITIAL_QUOTE_PUNCTUATION

Added in API level 1

public static final byte INITIAL_QUOTE_PUNCTUATION

General category "Pi" in the Unicode specification.

Constant Value: 29 (0x0000001d)

LETTER_NUMBER

Added in API level 1

public static final byte LETTER_NUMBER

General category "Nl" in the Unicode specification.

Constant Value: 10 (0x0000000a)

LINE_SEPARATOR

Added in API level 1

public static final byte LINE_SEPARATOR

General category "Zl" in the Unicode specification.

Constant Value: 13 (0x0000000d)

LOWERCASE_LETTER

Added in API level 1

public static final byte LOWERCASE_LETTER

General category "Ll" in the Unicode specification.

Constant Value: 2 (0x00000002)

MATH_SYMBOL

Added in API level 1

public static final byte MATH_SYMBOL

General category "Sm" in the Unicode specification.

Constant Value: 25 (0x00000019)

MAX_CODE_POINT

Added in API level 1

public static final int MAX_CODE_POINT

The maximum value of a Unicode code point, constant U+10FFFF.

Constant Value: 1114111 (0x0010ffff)

MAX_HIGH_SURROGATE

Added in API level 1

public static final char MAX_HIGH_SURROGATE

The maximum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant '\uDBFF'. A high-surrogate is also known as a leading-surrogate.

Constant Value: 56319 (0x0000dbff)

MAX_LOW_SURROGATE

Added in API level 1

public static final char MAX_LOW_SURROGATE

The maximum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant '\uDFFF'. A low-surrogate is also known as a trailing-surrogate.

Constant Value: 57343 (0x0000dfff)

MAX_RADIX

Added in API level 1

public static final int MAX_RADIX

The maximum radix available for conversion to and from strings. The constant value of this field is the largest value permitted for the radix argument in radix-conversion methods such as the digit method, the forDigit method, and the toString method of class Integer.

See also:

Constant Value: 36 (0x00000024)

MAX_SURROGATE

Added in API level 1

public static final char MAX_SURROGATE

The maximum value of a Unicode surrogate code unit in the UTF-16 encoding, constant '\uDFFF'.

Constant Value: 57343 (0x0000dfff)

MAX_VALUE

Added in API level 1

public static final char MAX_VALUE

The constant value of this field is the largest value of type char, '\uFFFF'.

Constant Value: 65535 (0x0000ffff)

MIN_CODE_POINT

Added in API level 1

public static final int MIN_CODE_POINT

The minimum value of a Unicode code point, constant U+0000.

Constant Value: 0 (0x00000000)

MIN_HIGH_SURROGATE

Added in API level 1

public static final char MIN_HIGH_SURROGATE

The minimum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant '\uD800'. A high-surrogate is also known as a leading-surrogate.

Constant Value: 55296 (0x0000d800)

MIN_LOW_SURROGATE

Added in API level 1

public static final char MIN_LOW_SURROGATE

The minimum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant '\uDC00'. A low-surrogate is also known as a trailing-surrogate.

Constant Value: 56320 (0x0000dc00)

MIN_RADIX

Added in API level 1

public static final int MIN_RADIX

The minimum radix available for conversion to and from strings. The constant value of this field is the smallest value permitted for the radix argument in radix-conversion methods such as the digit method, the forDigit method, and the toString method of class Integer.

See also:

Constant Value: 2 (0x00000002)

MIN_SUPPLEMENTARY_CODE_POINT

Added in API level 1

public static final int MIN_SUPPLEMENTARY_CODE_POINT

The minimum value of a Unicode supplementary code point, constant U+10000.

Constant Value: 65536 (0x00010000)

MIN_SURROGATE

Added in API level 1

public static final char MIN_SURROGATE

The minimum value of a Unicode surrogate code unit in the UTF-16 encoding, constant '\uD800'.

Constant Value: 55296 (0x0000d800)

MIN_VALUE

Added in API level 1

public static final char MIN_VALUE

The constant value of this field is the smallest value of type char, '\u0000'.

Constant Value: 0 (0x00000000)

MODIFIER_LETTER

Added in API level 1

public static final byte MODIFIER_LETTER

General category "Lm" in the Unicode specification.

Constant Value: 4 (0x00000004)

MODIFIER_SYMBOL

Added in API level 1

public static final byte MODIFIER_SYMBOL

General category "Sk" in the Unicode specification.

Constant Value: 27 (0x0000001b)

NON_SPACING_MARK

Added in API level 1

public static final byte NON_SPACING_MARK

General category "Mn" in the Unicode specification.

Constant Value: 6 (0x00000006)

OTHER_LETTER

Added in API level 1

public static final byte OTHER_LETTER

General category "Lo" in the Unicode specification.

Constant Value: 5 (0x00000005)

OTHER_NUMBER

Added in API level 1

public static final byte OTHER_NUMBER

General category "No" in the Unicode specification.

Constant Value: 11 (0x0000000b)

OTHER_PUNCTUATION

Added in API level 1

public static final byte OTHER_PUNCTUATION

General category "Po" in the Unicode specification.

Constant Value: 24 (0x00000018)

OTHER_SYMBOL

Added in API level 1

public static final byte OTHER_SYMBOL

General category "So" in the Unicode specification.

Constant Value: 28 (0x0000001c)

PARAGRAPH_SEPARATOR

Added in API level 1

public static final byte PARAGRAPH_SEPARATOR

General category "Zp" in the Unicode specification.

Constant Value: 14 (0x0000000e)

PRIVATE_USE

Added in API level 1

public static final byte PRIVATE_USE

General category "Co" in the Unicode specification.

Constant Value: 18 (0x00000012)

SIZE

Added in API level 1

public static final int SIZE

The number of bits used to represent a char value in unsigned binary form, constant 16.

Constant Value: 16 (0x00000010)

SPACE_SEPARATOR

Added in API level 1

public static final byte SPACE_SEPARATOR

General category "Zs" in the Unicode specification.

Constant Value: 12 (0x0000000c)

START_PUNCTUATION

Added in API level 1

public static final byte START_PUNCTUATION

General category "Ps" in the Unicode specification.

Constant Value: 21 (0x00000015)

SURROGATE

Added in API level 1

public static final byte SURROGATE

General category "Cs" in the Unicode specification.

Constant Value: 19 (0x00000013)

TITLECASE_LETTER

Added in API level 1

public static final byte TITLECASE_LETTER

General category "Lt" in the Unicode specification.

Constant Value: 3 (0x00000003)

UNASSIGNED

Added in API level 1

public static final byte UNASSIGNED

General category "Cn" in the Unicode specification.

Constant Value: 0 (0x00000000)

UPPERCASE_LETTER

Added in API level 1

public static final byte UPPERCASE_LETTER

General category "Lu" in the Unicode specification.

Constant Value: 1 (0x00000001)

Fields

TYPE

Added in API level 1

public static final Class<Character> TYPE

The Class instance representing the primitive type char.

Public constructors

Character

Added in API level 1

public Character (char value)

This constructor is deprecated.
It is rarely appropriate to use this constructor. The static factory valueOf(char) is generally a better choice, as it is likely to yield significantly better space and time performance.

Constructs a newly allocated Character object that represents the specified char value.

Parameters
`value`	`char`: the value to be represented by the `Character` object.

Public methods

charCount

Added in API level 1

public static int charCount (int codePoint)

Determines the number of char values needed to represent the specified character (Unicode code point). If the specified character is equal to or greater than 0x10000, then the method returns 2. Otherwise, the method returns 1.

This method doesn't validate the specified character to be a valid Unicode code point. The caller must validate the character value using isValidCodePoint if necessary.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`int`	2 if the character is a valid supplementary character; 1 otherwise.

See also:

isSupplementaryCodePoint(int)

charValue

Added in API level 1

public char charValue ()

Returns the value of this Character object.

Returns
`char`	the primitive `char` value represented by this object.

codePointAt

Added in API level 1

public static int codePointAt (char[] a, 
                int index, 
                int limit)

Returns the code point at the given index of the char array, where only array elements with index less than limit can be used. If the char value at the given index in the char array is in the high-surrogate range, the following index is less than the limit, and the char value at the following index is in the low-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the char value at the given index is returned.

Parameters
`a`	`char`: the `char` array
`index`	`int`: the index to the `char` values (Unicode code units) in the `char` array to be converted
`limit`	`int`: the index after the last array element that can be used in the `char` array

Returns
`int`	the Unicode code point at the given index

Throws
`NullPointerException`	if `a` is null.
`IndexOutOfBoundsException`	if the `index` argument is negative or not less than the `limit` argument, or if the `limit` argument is negative or greater than the length of the `char` array.

codePointAt

Added in API level 1

public static int codePointAt (char[] a, 
                int index)

Returns the code point at the given index of the char array. If the char value at the given index in the char array is in the high-surrogate range, the following index is less than the length of the char array, and the char value at the following index is in the low-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the char value at the given index is returned.

Parameters
`a`	`char`: the `char` array
`index`	`int`: the index to the `char` values (Unicode code units) in the `char` array to be converted

Returns
`int`	the Unicode code point at the given index

Throws
`NullPointerException`	if `a` is null.
`IndexOutOfBoundsException`	if the value `index` is negative or not less than the length of the `char` array.

codePointAt

Added in API level 1

public static int codePointAt (CharSequence seq, 
                int index)

Returns the code point at the given index of the CharSequence. If the char value at the given index in the CharSequence is in the high-surrogate range, the following index is less than the length of the CharSequence, and the char value at the following index is in the low-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the char value at the given index is returned.

Parameters
`seq`	`CharSequence`: a sequence of `char` values (Unicode code units)
`index`	`int`: the index to the `char` values (Unicode code units) in `seq` to be converted

Returns
`int`	the Unicode code point at the given index

Throws
`NullPointerException`	if `seq` is null.
`IndexOutOfBoundsException`	if the value `index` is negative or not less than `seq.length()`.

codePointBefore

Added in API level 1

public static int codePointBefore (char[] a, 
                int index)

Returns the code point preceding the given index of the char array. If the char value at (index - 1) in the char array is in the low-surrogate range, (index - 2) is not negative, and the char value at (index - 2) in the char array is in the high-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the char value at (index - 1) is returned.

Parameters
`a`	`char`: the `char` array
`index`	`int`: the index following the code point that should be returned

Returns
`int`	the Unicode code point value before the given index.

Throws
`NullPointerException`	if `a` is null.
`IndexOutOfBoundsException`	if the `index` argument is less than 1 or greater than the length of the `char` array

codePointBefore

Added in API level 1

public static int codePointBefore (CharSequence seq, 
                int index)

Returns the code point preceding the given index of the CharSequence. If the char value at (index - 1) in the CharSequence is in the low-surrogate range, (index - 2) is not negative, and the char value at (index - 2) in the CharSequence is in the high-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the char value at (index - 1) is returned.

Parameters
`seq`	`CharSequence`: the `CharSequence` instance
`index`	`int`: the index following the code point that should be returned

Returns
`int`	the Unicode code point value before the given index.

Throws
`NullPointerException`	if `seq` is null.
`IndexOutOfBoundsException`	if the `index` argument is less than 1 or greater than `seq.length()`.

codePointBefore

Added in API level 1

public static int codePointBefore (char[] a, 
                int index, 
                int start)

Returns the code point preceding the given index of the char array, where only array elements with index greater than or equal to start can be used. If the char value at (index - 1) in the char array is in the low-surrogate range, (index - 2) is not less than start, and the char value at (index - 2) in the char array is in the high-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the char value at (index - 1) is returned.

Parameters
`a`	`char`: the `char` array
`index`	`int`: the index following the code point that should be returned
`start`	`int`: the index of the first array element in the `char` array

Returns
`int`	the Unicode code point value before the given index.

Throws
`NullPointerException`	if `a` is null.
`IndexOutOfBoundsException`	if the `index` argument is not greater than the `start` argument or is greater than the length of the `char` array, or if the `start` argument is negative or not less than the length of the `char` array.

codePointCount

Added in API level 1

public static int codePointCount (CharSequence seq, 
                int beginIndex, 
                int endIndex)

Returns the number of Unicode code points in the text range of the specified char sequence. The text range begins at the specified beginIndex and extends to the char at index endIndex - 1. Thus the length (in chars) of the text range is endIndex-beginIndex. Unpaired surrogates within the text range count as one code point each.

Parameters
`seq`	`CharSequence`: the char sequence
`beginIndex`	`int`: the index to the first `char` of the text range.
`endIndex`	`int`: the index after the last `char` of the text range.

Returns
`int`	the number of Unicode code points in the specified text range

Throws
`NullPointerException`	if `seq` is null.
`IndexOutOfBoundsException`	if the `beginIndex` is negative, or `endIndex` is larger than the length of the given sequence, or `beginIndex` is larger than `endIndex`.

codePointCount

Added in API level 1

public static int codePointCount (char[] a, 
                int offset, 
                int count)

Returns the number of Unicode code points in a subarray of the char array argument. The offset argument is the index of the first char of the subarray and the count argument specifies the length of the subarray in chars. Unpaired surrogates within the subarray count as one code point each.

Parameters
`a`	`char`: the `char` array
`offset`	`int`: the index of the first `char` in the given `char` array
`count`	`int`: the length of the subarray in `char`s

Returns
`int`	the number of Unicode code points in the specified subarray

Throws
`NullPointerException`	if `a` is null.
`IndexOutOfBoundsException`	if `offset` or `count` is negative, or if `offset + count` is larger than the length of the given array.

codePointOf

Added in API level 35

public static int codePointOf (String name)

Returns the code point value of the Unicode character specified by the given Unicode character name.

Note: if a character is not assigned a name by the UnicodeData file (part of the Unicode Character Database maintained by the Unicode Consortium), its name is defined as the result of expression:

Character.UnicodeBlock.of(codePoint).toString().replace('_', ' ') + " " + Integer.toHexString(codePoint).toUpperCase(Locale.ROOT);

The name matching is case insensitive, with any leading and trailing whitespace character removed.

Parameters
`name`	`String`: the Unicode character name

Returns
`int`	the code point value of the character specified by its name.

Throws
`IllegalArgumentException`	if the specified `name` is not a valid Unicode character name.
`NullPointerException`	if `name` is `null`

compare

Added in API level 19

public static int compare (char x, 
                char y)

Compares two char values numerically. The value returned is identical to what would be returned by:

    Character.valueOf(x).compareTo(Character.valueOf(y))

Parameters
`x`	`char`: the first `char` to compare
`y`	`char`: the second `char` to compare

Returns
`int`	the value `0` if `x == y`; a value less than `0` if `x < y`; and a value greater than `0` if `x > y`

compareTo

Added in API level 1

public int compareTo (Character anotherCharacter)

Compares two Character objects numerically.

Parameters
`anotherCharacter`	`Character`: the `Character` to be compared.

Returns
`int`	the value `0` if the argument `Character` is equal to this `Character`; a value less than `0` if this `Character` is numerically less than the `Character` argument; and a value greater than `0` if this `Character` is numerically greater than the `Character` argument (unsigned comparison). Note that this is strictly a numerical comparison; it is not locale-dependent.

digit

Added in API level 1

public static int digit (int codePoint, 
                int radix)

Returns the numeric value of the specified character (Unicode code point) in the specified radix.

If the radix is not in the range MIN_RADIX ≤ radix ≤ MAX_RADIX or if the character is not a valid digit in the specified radix, -1 is returned. A character is a valid digit if at least one of the following is true:

The method isDigit(codePoint) is true of the character and the Unicode decimal digit value of the character (or its single-character decomposition) is less than the specified radix. In this case the decimal digit value is returned.
The character is one of the uppercase Latin letters 'A' through 'Z' and its code is less than radix + 'A' - 10. In this case, codePoint - 'A' + 10 is returned.
The character is one of the lowercase Latin letters 'a' through 'z' and its code is less than radix + 'a' - 10. In this case, codePoint - 'a' + 10 is returned.
The character is one of the fullwidth uppercase Latin letters A ('\uFF21') through Z ('\uFF3A') and its code is less than radix + '\uFF21' - 10. In this case, codePoint - '\uFF21' + 10 is returned.
The character is one of the fullwidth lowercase Latin letters a ('\uFF41') through z ('\uFF5A') and its code is less than radix + '\uFF41'- 10. In this case, codePoint - '\uFF41' + 10 is returned.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be converted.
`radix`	`int`: the radix.

Returns
`int`	the numeric value represented by the character in the specified radix.

See also:

digit

Added in API level 1

public static int digit (char ch, 
                int radix)

Returns the numeric value of the character ch in the specified radix.

If the radix is not in the range MIN_RADIX ≤ radix ≤ MAX_RADIX or if the value of ch is not a valid digit in the specified radix, -1 is returned. A character is a valid digit if at least one of the following is true:

The method isDigit is true of the character and the Unicode decimal digit value of the character (or its single-character decomposition) is less than the specified radix. In this case the decimal digit value is returned.
The character is one of the uppercase Latin letters 'A' through 'Z' and its code is less than radix + 'A' - 10. In this case, ch - 'A' + 10 is returned.
The character is one of the lowercase Latin letters 'a' through 'z' and its code is less than radix + 'a' - 10. In this case, ch - 'a' + 10 is returned.
The character is one of the fullwidth uppercase Latin letters A ('\uFF21') through Z ('\uFF3A') and its code is less than radix + '\uFF21' - 10. In this case, ch - '\uFF21' + 10 is returned.
The character is one of the fullwidth lowercase Latin letters a ('\uFF41') through z ('\uFF5A') and its code is less than radix + '\uFF41' - 10. In this case, ch - '\uFF41' + 10 is returned.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the digit(int, int) method.

Parameters
`ch`	`char`: the character to be converted.
`radix`	`int`: the radix.

Returns
`int`	the numeric value represented by the character in the specified radix.

See also:

equals

Added in API level 1

public boolean equals (Object obj)

Compares this object against the specified object. The result is true if and only if the argument is not null and is a Character object that represents the same char value as this object.

Parameters
`obj`	`Object`: the object to compare with.

Returns
`boolean`	`true` if the objects are the same; `false` otherwise.

forDigit

Added in API level 1

public static char forDigit (int digit, 
                int radix)

Determines the character representation for a specific digit in the specified radix. If the value of radix is not a valid radix, or the value of digit is not a valid digit in the specified radix, the null character ('\u0000') is returned.

The radix argument is valid if it is greater than or equal to MIN_RADIX and less than or equal to MAX_RADIX. The digit argument is valid if 0 <= digit < radix.

If the digit is less than 10, then '0' + digit is returned. Otherwise, the value 'a' + digit - 10 is returned.

Parameters
`digit`	`int`: the number to convert to a character.
`radix`	`int`: the radix.

Returns
`char`	the `char` representation of the specified digit in the specified radix.

See also:

getDirectionality

Added in API level 1

public static byte getDirectionality (char ch)

Returns the Unicode directionality property for the given character. Character directionality is used to calculate the visual ordering of text. The directionality value of undefined char values is DIRECTIONALITY_UNDEFINED.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the getDirectionality(int) method.

Parameters
`ch`	`char`: `char` for which the directionality property is requested.

Returns
`byte`	the directionality property of the `char` value.

See also:

getDirectionality

Added in API level 1

public static byte getDirectionality (int codePoint)

Returns the Unicode directionality property for the given character (Unicode code point). Character directionality is used to calculate the visual ordering of text. The directionality value of undefined character is DIRECTIONALITY_UNDEFINED.

Parameters
`codePoint`	`int`: the character (Unicode code point) for which the directionality property is requested.

Returns
`byte`	the directionality property of the character.

See also:

getName

Added in API level 19

public static String getName (int codePoint)

Returns the Unicode name of the specified character codePoint, or null if the code point is unassigned.

Note: if the specified character is not assigned a name by the UnicodeData file (part of the Unicode Character Database maintained by the Unicode Consortium), the returned name is the same as the result of expression:

Character.UnicodeBlock.of(codePoint).toString().replace('_', ' ') + " " + Integer.toHexString(codePoint).toUpperCase(Locale.ROOT);

Parameters
`codePoint`	`int`: the character (Unicode code point)

Returns
`String`	the Unicode name of the specified character, or null if the code point is unassigned.

Throws
`IllegalArgumentException`	if the specified `codePoint` is not a valid Unicode code point.

getNumericValue

Added in API level 1

public static int getNumericValue (int codePoint)

Returns the int value that the specified character (Unicode code point) represents. For example, the character '\u216C' (the Roman numeral fifty) will return an int with a value of 50.

The letters A-Z in their uppercase ('\u0041' through '\u005A'), lowercase ('\u0061' through '\u007A'), and full width variant ('\uFF21' through '\uFF3A' and '\uFF41' through '\uFF5A') forms have numeric values from 10 through 35. This is independent of the Unicode specification, which does not assign numeric values to these char values.

If the character does not have a numeric value, then -1 is returned. If the character has a numeric value that cannot be represented as a nonnegative integer (for example, a fractional value), then -2 is returned.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be converted.

Returns
`int`	the numeric value of the character, as a nonnegative `int` value; -2 if the character has a numeric value but the value can not be represented as a nonnegative `int` value; -1 if the character has no numeric value.

See also:

getNumericValue

Added in API level 1

public static int getNumericValue (char ch)

Returns the int value that the specified Unicode character represents. For example, the character '\u216C' (the roman numeral fifty) will return an int with a value of 50.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the getNumericValue(int) method.

Parameters
`ch`	`char`: the character to be converted.

Returns
`int`	the numeric value of the character, as a nonnegative `int` value; -2 if the character has a numeric value but the value can not be represented as a nonnegative `int` value; -1 if the character has no numeric value.

See also:

getType

Added in API level 1

public static int getType (char ch)

Returns a value indicating a character's general category.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the getType(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`int`	a value of type `int` representing the character's general category.

See also:

getType

Added in API level 1

public static int getType (int codePoint)

Returns a value indicating a character's general category.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`int`	a value of type `int` representing the character's general category.

See also:

hashCode

Added in API level 24

public static int hashCode (char value)

Returns a hash code for a char value; compatible with Character.hashCode().

Parameters
`value`	`char`: The `char` for which to return a hash code.

Returns
`int`	a hash code value for a `char` value.

hashCode

Added in API level 1

public int hashCode ()

Returns a hash code for this Character; equal to the result of invoking charValue().

Returns
`int`	a hash code value for this `Character`

highSurrogate

Added in API level 19

public static char highSurrogate (int codePoint)

Returns the leading surrogate (a high surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding. If the specified character is not a supplementary character, an unspecified char is returned.

If isSupplementaryCodePoint(x) is true, then isHighSurrogate(highSurrogate(x)) and toCodePoint(highSurrogate(x), lowSurrogate(x)) == x are also always true.

Parameters
`codePoint`	`int`: a supplementary character (Unicode code point)

Returns
`char`	the leading surrogate code unit used to represent the character in the UTF-16 encoding

isAlphabetic

Added in API level 19

public static boolean isAlphabetic (int codePoint)

Determines if the specified character (Unicode code point) is alphabetic.

A character is considered to be alphabetic if its general category type, provided by getType(codePoint), is any of the following:

UPPERCASE_LETTER
LOWERCASE_LETTER
TITLECASE_LETTER
MODIFIER_LETTER
OTHER_LETTER
LETTER_NUMBER

or it has contributory property Other_Alphabetic as defined by the Unicode Standard.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is a Unicode alphabet character, `false` otherwise.

isBmpCodePoint

Added in API level 19

public static boolean isBmpCodePoint (int codePoint)

Determines whether the specified character (Unicode code point) is in the Basic Multilingual Plane (BMP). Such code points can be represented using a single char.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be to

Returns
`boolean`	`true` if the specified code point is between `MIN_VALUE` and `MAX_VALUE` inclusive; `false` otherwise.

isDefined

Added in API level 1

public static boolean isDefined (int codePoint)

Determines if a character (Unicode code point) is defined in Unicode.

A character is defined if at least one of the following is true:

It has an entry in the UnicodeData file.
It has a value in a range defined by the UnicodeData file.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character has a defined meaning in Unicode; `false` otherwise.

See also:

isDefined

Added in API level 1

public static boolean isDefined (char ch)

Determines if a character is defined in Unicode.

A character is defined if at least one of the following is true:

It has an entry in the UnicodeData file.
It has a value in a range defined by the UnicodeData file.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isDefined(int) method.

Parameters
`ch`	`char`: the character to be tested

Returns
`boolean`	`true` if the character has a defined meaning in Unicode; `false` otherwise.

See also:

isDigit

Added in API level 1

public static boolean isDigit (char ch)

Determines if the specified character is a digit.

A character is a digit if its general category type, provided by Character.getType(ch), is DECIMAL_DIGIT_NUMBER.

Some Unicode character ranges that contain digits:

'\u0030' through '\u0039', ISO-LATIN-1 digits ('0' through '9')
'\u0660' through '\u0669', Arabic-Indic digits
'\u06F0' through '\u06F9', Extended Arabic-Indic digits
'\u0966' through '\u096F', Devanagari digits
'\uFF10' through '\uFF19', Fullwidth digits

Many other character ranges contain digits as well.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isDigit(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is a digit; `false` otherwise.

See also:

isDigit

Added in API level 1

public static boolean isDigit (int codePoint)

Determines if the specified character (Unicode code point) is a digit.

A character is a digit if its general category type, provided by getType(codePoint), is DECIMAL_DIGIT_NUMBER.

Some Unicode character ranges that contain digits:

'\u0030' through '\u0039', ISO-LATIN-1 digits ('0' through '9')
'\u0660' through '\u0669', Arabic-Indic digits
'\u06F0' through '\u06F9', Extended Arabic-Indic digits
'\u0966' through '\u096F', Devanagari digits
'\uFF10' through '\uFF19', Fullwidth digits

Many other character ranges contain digits as well.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is a digit; `false` otherwise.

See also:

isHighSurrogate

Added in API level 1

public static boolean isHighSurrogate (char ch)

Determines if the given char value is a Unicode high-surrogate code unit (also known as leading-surrogate code unit).

Such values do not represent characters by themselves, but are used in the representation of supplementary characters in the UTF-16 encoding.

Parameters
`ch`	`char`: the `char` value to be tested.

Returns
`boolean`	`true` if the `char` value is between `MIN_HIGH_SURROGATE` and `MAX_HIGH_SURROGATE` inclusive; `false` otherwise.

See also:

isISOControl

Added in API level 1

public static boolean isISOControl (char ch)

Determines if the specified character is an ISO control character. A character is considered to be an ISO control character if its code is in the range '\u0000' through '\u001F' or in the range '\u007F' through '\u009F'.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isISOControl(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is an ISO control character; `false` otherwise.

See also:

isISOControl

Added in API level 1

public static boolean isISOControl (int codePoint)

Determines if the referenced character (Unicode code point) is an ISO control character. A character is considered to be an ISO control character if its code is in the range '\u0000' through '\u001F' or in the range '\u007F' through '\u009F'.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is an ISO control character; `false` otherwise.

See also:

isIdentifierIgnorable

Added in API level 1

public static boolean isIdentifierIgnorable (char ch)

Determines if the specified character should be regarded as an ignorable character in a Java identifier or a Unicode identifier.

The following Unicode characters are ignorable in a Java identifier or a Unicode identifier:

ISO control characters that are not whitespace
- '\u0000' through '\u0008'
- '\u000E' through '\u001B'
- '\u007F' through '\u009F'
all characters that have the FORMAT general category value

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isIdentifierIgnorable(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is an ignorable control character that may be part of a Java or Unicode identifier; `false` otherwise.

See also:

isIdentifierIgnorable

Added in API level 1

public static boolean isIdentifierIgnorable (int codePoint)

Determines if the specified character (Unicode code point) should be regarded as an ignorable character in a Java identifier or a Unicode identifier.

The following Unicode characters are ignorable in a Java identifier or a Unicode identifier:

ISO control characters that are not whitespace
- '\u0000' through '\u0008'
- '\u000E' through '\u001B'
- '\u007F' through '\u009F'
all characters that have the FORMAT general category value

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is an ignorable control character that may be part of a Java or Unicode identifier; `false` otherwise.

See also:

isIdeographic

Added in API level 19

public static boolean isIdeographic (int codePoint)

Determines if the specified character (Unicode code point) is a CJKV (Chinese, Japanese, Korean and Vietnamese) ideograph, as defined by the Unicode Standard.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is a Unicode ideograph character, `false` otherwise.

isJavaIdentifierPart

Added in API level 1

public static boolean isJavaIdentifierPart (char ch)

Determines if the specified character may be part of a Java identifier as other than the first character.

A character may be part of a Java identifier if any of the following conditions are true:

it is a letter
it is a currency symbol (such as '$')
it is a connecting punctuation character (such as '_')
it is a digit
it is a numeric letter (such as a Roman numeral character)
it is a combining mark
it is a non-spacing mark
isIdentifierIgnorable returns true for the character

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isJavaIdentifierPart(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character may be part of a Java identifier; `false` otherwise.

See also:

isJavaIdentifierPart

Added in API level 1

public static boolean isJavaIdentifierPart (int codePoint)

Determines if the character (Unicode code point) may be part of a Java identifier as other than the first character.

A character may be part of a Java identifier if any of the following conditions are true:

it is a letter
it is a currency symbol (such as '$')
it is a connecting punctuation character (such as '_')
it is a digit
it is a numeric letter (such as a Roman numeral character)
it is a combining mark
it is a non-spacing mark
isIdentifierIgnorable(codePoint) returns true for the code point

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character may be part of a Java identifier; `false` otherwise.

See also:

isJavaIdentifierStart

Added in API level 1

public static boolean isJavaIdentifierStart (int codePoint)

Determines if the character (Unicode code point) is permissible as the first character in a Java identifier.

A character may start a Java identifier if and only if one of the following conditions is true:

isLetter(codePoint) returns true
getType(codePoint) returns LETTER_NUMBER
the referenced character is a currency symbol (such as '$')
the referenced character is a connecting punctuation character (such as '_').

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character may start a Java identifier; `false` otherwise.

See also:

isJavaIdentifierStart

Added in API level 1

public static boolean isJavaIdentifierStart (char ch)

Determines if the specified character is permissible as the first character in a Java identifier.

A character may start a Java identifier if and only if one of the following conditions is true:

isLetter(ch) returns true
getType(ch) returns LETTER_NUMBER
ch is a currency symbol (such as '$')
ch is a connecting punctuation character (such as '_').

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isJavaIdentifierStart(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character may start a Java identifier; `false` otherwise.

See also:

isJavaLetter

Added in API level 1
Deprecated in API level 15

public static boolean isJavaLetter (char ch)

This method was deprecated in API level 15.
Replaced by isJavaIdentifierStart(char).

Determines if the specified character is permissible as the first character in a Java identifier.

A character may start a Java identifier if and only if one of the following conditions is true:

isLetter(ch) returns true
getType(ch) returns LETTER_NUMBER
ch is a currency symbol (such as '$')
ch is a connecting punctuation character (such as '_').

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character may start a Java identifier; `false` otherwise.

See also:

isJavaLetterOrDigit

Added in API level 1
Deprecated in API level 15

public static boolean isJavaLetterOrDigit (char ch)

This method was deprecated in API level 15.
Replaced by isJavaIdentifierPart(char).

Determines if the specified character may be part of a Java identifier as other than the first character.

A character may be part of a Java identifier if and only if one of the following conditions is true:

it is a letter
it is a currency symbol (such as '$')
it is a connecting punctuation character (such as '_')
it is a digit
it is a numeric letter (such as a Roman numeral character)
it is a combining mark
it is a non-spacing mark
isIdentifierIgnorable returns true for the character.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character may be part of a Java identifier; `false` otherwise.

See also:

isLetter

Added in API level 1

public static boolean isLetter (char ch)

Determines if the specified character is a letter.

A character is considered to be a letter if its general category type, provided by Character.getType(ch), is any of the following:

UPPERCASE_LETTER
LOWERCASE_LETTER
TITLECASE_LETTER
MODIFIER_LETTER
OTHER_LETTER

Not all letters have case. Many characters are letters but are neither uppercase nor lowercase nor titlecase.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isLetter(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is a letter; `false` otherwise.

See also:

isLetter

Added in API level 1

public static boolean isLetter (int codePoint)

Determines if the specified character (Unicode code point) is a letter.

A character is considered to be a letter if its general category type, provided by getType(codePoint), is any of the following:

UPPERCASE_LETTER
LOWERCASE_LETTER
TITLECASE_LETTER
MODIFIER_LETTER
OTHER_LETTER

Not all letters have case. Many characters are letters but are neither uppercase nor lowercase nor titlecase.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is a letter; `false` otherwise.

See also:

isLetterOrDigit

Added in API level 1

public static boolean isLetterOrDigit (char ch)

Determines if the specified character is a letter or digit.

A character is considered to be a letter or digit if either Character.isLetter(char ch) or Character.isDigit(char ch) returns true for the character.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isLetterOrDigit(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is a letter or digit; `false` otherwise.

See also:

isLetterOrDigit

Added in API level 1

public static boolean isLetterOrDigit (int codePoint)

Determines if the specified character (Unicode code point) is a letter or digit.

A character is considered to be a letter or digit if either isLetter(codePoint) or isDigit(codePoint) returns true for the character.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is a letter or digit; `false` otherwise.

See also:

isLowSurrogate

Added in API level 1

public static boolean isLowSurrogate (char ch)

Determines if the given char value is a Unicode low-surrogate code unit (also known as trailing-surrogate code unit).

Such values do not represent characters by themselves, but are used in the representation of supplementary characters in the UTF-16 encoding.

Parameters
`ch`	`char`: the `char` value to be tested.

Returns
`boolean`	`true` if the `char` value is between `MIN_LOW_SURROGATE` and `MAX_LOW_SURROGATE` inclusive; `false` otherwise.

See also:

isHighSurrogate(char)

isLowerCase

Added in API level 1

public static boolean isLowerCase (char ch)

Determines if the specified character is a lowercase character.

A character is lowercase if its general category type, provided by Character.getType(ch), is LOWERCASE_LETTER, or it has contributory property Other_Lowercase as defined by the Unicode Standard.

The following are examples of lowercase characters:

 a b c d e f g h i j k l m n o p q r s t u v w x y z
 '\u00DF' '\u00E0' '\u00E1' '\u00E2' '\u00E3' '\u00E4' '\u00E5' '\u00E6'
 '\u00E7' '\u00E8' '\u00E9' '\u00EA' '\u00EB' '\u00EC' '\u00ED' '\u00EE'
 '\u00EF' '\u00F0' '\u00F1' '\u00F2' '\u00F3' '\u00F4' '\u00F5' '\u00F6'
 '\u00F8' '\u00F9' '\u00FA' '\u00FB' '\u00FC' '\u00FD' '\u00FE' '\u00FF'

Many other Unicode characters are lowercase too.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isLowerCase(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is lowercase; `false` otherwise.

See also:

isLowerCase

Added in API level 1

public static boolean isLowerCase (int codePoint)

Determines if the specified character (Unicode code point) is a lowercase character.

A character is lowercase if its general category type, provided by getType(codePoint), is LOWERCASE_LETTER, or it has contributory property Other_Lowercase as defined by the Unicode Standard.

The following are examples of lowercase characters:

 a b c d e f g h i j k l m n o p q r s t u v w x y z
 '\u00DF' '\u00E0' '\u00E1' '\u00E2' '\u00E3' '\u00E4' '\u00E5' '\u00E6'
 '\u00E7' '\u00E8' '\u00E9' '\u00EA' '\u00EB' '\u00EC' '\u00ED' '\u00EE'
 '\u00EF' '\u00F0' '\u00F1' '\u00F2' '\u00F3' '\u00F4' '\u00F5' '\u00F6'
 '\u00F8' '\u00F9' '\u00FA' '\u00FB' '\u00FC' '\u00FD' '\u00FE' '\u00FF'

Many other Unicode characters are lowercase too.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is lowercase; `false` otherwise.

See also:

isMirrored

Added in API level 1

public static boolean isMirrored (int codePoint)

Determines whether the specified character (Unicode code point) is mirrored according to the Unicode specification. Mirrored characters should have their glyphs horizontally mirrored when displayed in text that is right-to-left. For example, '\u0028' LEFT PARENTHESIS is semantically defined to be an opening parenthesis. This will appear as a "(" in text that is left-to-right but as a ")" in text that is right-to-left.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is mirrored, `false` if the character is not mirrored or is not defined.

isMirrored

Added in API level 1

public static boolean isMirrored (char ch)

Determines whether the character is mirrored according to the Unicode specification. Mirrored characters should have their glyphs horizontally mirrored when displayed in text that is right-to-left. For example, '\u0028' LEFT PARENTHESIS is semantically defined to be an opening parenthesis. This will appear as a "(" in text that is left-to-right but as a ")" in text that is right-to-left.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isMirrored(int) method.

Parameters
`ch`	`char`: `char` for which the mirrored property is requested

Returns
`boolean`	`true` if the char is mirrored, `false` if the `char` is not mirrored or is not defined.

isSpace

Added in API level 1
Deprecated in API level 15

public static boolean isSpace (char ch)

This method was deprecated in API level 15.
Replaced by isWhitespace(char).

Determines if the specified character is ISO-LATIN-1 white space. This method returns true for the following five characters only:

truechars
Character	Code	Name
`'\t'`	`U+0009`	`HORIZONTAL TABULATION`
`'\n'`	`U+000A`	`NEW LINE`
`'\f'`	`U+000C`	`FORM FEED`
`'\r'`	`U+000D`	`CARRIAGE RETURN`
`' '`	`U+0020`	`SPACE`

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is ISO-LATIN-1 white space; `false` otherwise.

See also:

isSpaceChar

Added in API level 1

public static boolean isSpaceChar (char ch)

Determines if the specified character is a Unicode space character. A character is considered to be a space character if and only if it is specified to be a space character by the Unicode Standard. This method returns true if the character's general category type is any of the following:

SPACE_SEPARATOR
LINE_SEPARATOR
PARAGRAPH_SEPARATOR

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isSpaceChar(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is a space character; `false` otherwise.

See also:

isWhitespace(char)

isSpaceChar

Added in API level 1

public static boolean isSpaceChar (int codePoint)

Determines if the specified character (Unicode code point) is a Unicode space character. A character is considered to be a space character if and only if it is specified to be a space character by the Unicode Standard. This method returns true if the character's general category type is any of the following:

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is a space character; `false` otherwise.

See also:

isWhitespace(int)

isSupplementaryCodePoint

Added in API level 1

public static boolean isSupplementaryCodePoint (int codePoint)

Determines whether the specified character (Unicode code point) is in the supplementary character range.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested

Returns
`boolean`	`true` if the specified code point is between `MIN_SUPPLEMENTARY_CODE_POINT` and `MAX_CODE_POINT` inclusive; `false` otherwise.

isSurrogate

Added in API level 19

public static boolean isSurrogate (char ch)

Determines if the given char value is a Unicode surrogate code unit.

Such values do not represent characters by themselves, but are used in the representation of supplementary characters in the UTF-16 encoding.

A char value is a surrogate code unit if and only if it is either a low-surrogate code unit or a high-surrogate code unit.

Parameters
`ch`	`char`: the `char` value to be tested.

Returns
`boolean`	`true` if the `char` value is between `MIN_SURROGATE` and `MAX_SURROGATE` inclusive; `false` otherwise.

isSurrogatePair

Added in API level 1

public static boolean isSurrogatePair (char high, 
                char low)

Determines whether the specified pair of char values is a valid Unicode surrogate pair.

This method is equivalent to the expression:

isHighSurrogate(high) && isLowSurrogate(low)

Parameters
`high`	`char`: the high-surrogate code value to be tested
`low`	`char`: the low-surrogate code value to be tested

Returns
`boolean`	`true` if the specified high and low-surrogate code values represent a valid surrogate pair; `false` otherwise.

isTitleCase

Added in API level 1

public static boolean isTitleCase (int codePoint)

Determines if the specified character (Unicode code point) is a titlecase character.

A character is a titlecase character if its general category type, provided by getType(codePoint), is TITLECASE_LETTER.

Some characters look like pairs of Latin letters. For example, there is an uppercase letter that looks like "LJ" and has a corresponding lowercase letter that looks like "lj". A third form, which looks like "Lj", is the appropriate form to use when rendering a word in lowercase with initial capitals, as for a book title.

These are some of the Unicode characters for which this method returns true:

LATIN CAPITAL LETTER D WITH SMALL LETTER Z WITH CARON
LATIN CAPITAL LETTER L WITH SMALL LETTER J
LATIN CAPITAL LETTER N WITH SMALL LETTER J
LATIN CAPITAL LETTER D WITH SMALL LETTER Z

Many other Unicode characters are titlecase too.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is titlecase; `false` otherwise.

See also:

isTitleCase

Added in API level 1

public static boolean isTitleCase (char ch)

Determines if the specified character is a titlecase character.

A character is a titlecase character if its general category type, provided by Character.getType(ch), is TITLECASE_LETTER.

These are some of the Unicode characters for which this method returns true:

LATIN CAPITAL LETTER D WITH SMALL LETTER Z WITH CARON
LATIN CAPITAL LETTER L WITH SMALL LETTER J
LATIN CAPITAL LETTER N WITH SMALL LETTER J
LATIN CAPITAL LETTER D WITH SMALL LETTER Z

Many other Unicode characters are titlecase too.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isTitleCase(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is titlecase; `false` otherwise.

See also:

isUnicodeIdentifierPart

Added in API level 1

public static boolean isUnicodeIdentifierPart (int codePoint)

Determines if the specified character (Unicode code point) may be part of a Unicode identifier as other than the first character.

A character may be part of a Unicode identifier if and only if one of the following statements is true:

it is a letter
it is a connecting punctuation character (such as '_')
it is a digit
it is a numeric letter (such as a Roman numeral character)
it is a combining mark
it is a non-spacing mark
isIdentifierIgnorable returns true for this character.
it is an Other_ID_Start character.
it is an Other_ID_Continue character.

This method conforms to UAX31-R1: Default Identifiers requirement of the Unicode Standard, with the following profile of UAX31:

 Continue := Start + ID_Continue + ignorable
 Medial := empty
 ignorable := isIdentifierIgnorable(int) returns true for the character

ignorable is added to Continue for backward compatibility.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character may be part of a Unicode identifier; `false` otherwise.

See also:

isUnicodeIdentifierPart

Added in API level 1

public static boolean isUnicodeIdentifierPart (char ch)

Determines if the specified character may be part of a Unicode identifier as other than the first character.

A character may be part of a Unicode identifier if and only if one of the following statements is true:

it is a letter
it is a connecting punctuation character (such as '_')
it is a digit
it is a numeric letter (such as a Roman numeral character)
it is a combining mark
it is a non-spacing mark
isIdentifierIgnorable returns true for this character.
it is an Other_ID_Start character.
it is an Other_ID_Continue character.

This method conforms to UAX31-R1: Default Identifiers requirement of the Unicode Standard, with the following profile of UAX31:

 Continue := Start + ID_Continue + ignorable
 Medial := empty
 ignorable := isIdentifierIgnorable(char) returns true for the character

ignorable is added to Continue for backward compatibility.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isUnicodeIdentifierPart(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character may be part of a Unicode identifier; `false` otherwise.

See also:

isUnicodeIdentifierStart

Added in API level 1

public static boolean isUnicodeIdentifierStart (int codePoint)

Determines if the specified character (Unicode code point) is permissible as the first character in a Unicode identifier.

A character may start a Unicode identifier if and only if one of the following conditions is true:

isLetter(codePoint) returns true
getType(codePoint) returns LETTER_NUMBER.
it is an Other_ID_Start character.

This method conforms to UAX31-R1: Default Identifiers requirement of the Unicode Standard, with the following profile of UAX31:

 Start := ID_Start + 'VERTICAL TILDE' (U+2E2F)

'VERTICAL TILDE' is added to Start for backward compatibility.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character may start a Unicode identifier; `false` otherwise.

See also:

isUnicodeIdentifierStart

Added in API level 1

public static boolean isUnicodeIdentifierStart (char ch)

Determines if the specified character is permissible as the first character in a Unicode identifier.

A character may start a Unicode identifier if and only if one of the following conditions is true:

isLetter(ch) returns true
getType(ch) returns LETTER_NUMBER.
it is an Other_ID_Start character.

This method conforms to UAX31-R1: Default Identifiers requirement of the Unicode Standard, with the following profile of UAX31:

 Start := ID_Start + 'VERTICAL TILDE' (U+2E2F)

'VERTICAL TILDE' is added to Start for backward compatibility.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isUnicodeIdentifierStart(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character may start a Unicode identifier; `false` otherwise.

See also:

isUpperCase

Added in API level 1

public static boolean isUpperCase (char ch)

Determines if the specified character is an uppercase character.

A character is uppercase if its general category type, provided by Character.getType(ch), is UPPERCASE_LETTER. or it has contributory property Other_Uppercase as defined by the Unicode Standard.

The following are examples of uppercase characters:

 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
 '\u00C0' '\u00C1' '\u00C2' '\u00C3' '\u00C4' '\u00C5' '\u00C6' '\u00C7'
 '\u00C8' '\u00C9' '\u00CA' '\u00CB' '\u00CC' '\u00CD' '\u00CE' '\u00CF'
 '\u00D0' '\u00D1' '\u00D2' '\u00D3' '\u00D4' '\u00D5' '\u00D6' '\u00D8'
 '\u00D9' '\u00DA' '\u00DB' '\u00DC' '\u00DD' '\u00DE'

Many other Unicode characters are uppercase too.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isUpperCase(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is uppercase; `false` otherwise.

See also:

isUpperCase

Added in API level 1

public static boolean isUpperCase (int codePoint)

Determines if the specified character (Unicode code point) is an uppercase character.

A character is uppercase if its general category type, provided by getType(codePoint), is UPPERCASE_LETTER, or it has contributory property Other_Uppercase as defined by the Unicode Standard.

The following are examples of uppercase characters:

 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
 '\u00C0' '\u00C1' '\u00C2' '\u00C3' '\u00C4' '\u00C5' '\u00C6' '\u00C7'
 '\u00C8' '\u00C9' '\u00CA' '\u00CB' '\u00CC' '\u00CD' '\u00CE' '\u00CF'
 '\u00D0' '\u00D1' '\u00D2' '\u00D3' '\u00D4' '\u00D5' '\u00D6' '\u00D8'
 '\u00D9' '\u00DA' '\u00DB' '\u00DC' '\u00DD' '\u00DE'

Many other Unicode characters are uppercase too.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is uppercase; `false` otherwise.

See also:

isValidCodePoint

Added in API level 1

public static boolean isValidCodePoint (int codePoint)

Determines whether the specified code point is a valid Unicode code point value.

Parameters
`codePoint`	`int`: the Unicode code point to be tested

Returns
`boolean`	`true` if the specified code point value is between `MIN_CODE_POINT` and `MAX_CODE_POINT` inclusive; `false` otherwise.

isWhitespace

Added in API level 1

public static boolean isWhitespace (int codePoint)

Determines if the specified character (Unicode code point) is white space according to Java. A character is a Java whitespace character if and only if it satisfies one of the following criteria:

It is a Unicode space character (SPACE_SEPARATOR, LINE_SEPARATOR, or PARAGRAPH_SEPARATOR) but is not also a non-breaking space ('\u00A0', '\u2007', '\u202F').
It is '\t', U+0009 HORIZONTAL TABULATION.
It is '\n', U+000A LINE FEED.
It is '\u000B', U+000B VERTICAL TABULATION.
It is '\f', U+000C FORM FEED.
It is '\r', U+000D CARRIAGE RETURN.
It is '\u001C', U+001C FILE SEPARATOR.
It is '\u001D', U+001D GROUP SEPARATOR.
It is '\u001E', U+001E RECORD SEPARATOR.
It is '\u001F', U+001F UNIT SEPARATOR.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be tested.

Returns
`boolean`	`true` if the character is a Java whitespace character; `false` otherwise.

See also:

isSpaceChar(int)

isWhitespace

Added in API level 1

public static boolean isWhitespace (char ch)

Determines if the specified character is white space according to Java. A character is a Java whitespace character if and only if it satisfies one of the following criteria:

It is a Unicode space character (SPACE_SEPARATOR, LINE_SEPARATOR, or PARAGRAPH_SEPARATOR) but is not also a non-breaking space ('\u00A0', '\u2007', '\u202F').
It is '\t', U+0009 HORIZONTAL TABULATION.
It is '\n', U+000A LINE FEED.
It is '\u000B', U+000B VERTICAL TABULATION.
It is '\f', U+000C FORM FEED.
It is '\r', U+000D CARRIAGE RETURN.
It is '\u001C', U+001C FILE SEPARATOR.
It is '\u001D', U+001D GROUP SEPARATOR.
It is '\u001E', U+001E RECORD SEPARATOR.
It is '\u001F', U+001F UNIT SEPARATOR.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the isWhitespace(int) method.

Parameters
`ch`	`char`: the character to be tested.

Returns
`boolean`	`true` if the character is a Java whitespace character; `false` otherwise.

See also:

isSpaceChar(char)

lowSurrogate

Added in API level 19

public static char lowSurrogate (int codePoint)

Returns the trailing surrogate (a low surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding. If the specified character is not a supplementary character, an unspecified char is returned.

If isSupplementaryCodePoint(x) is true, then isLowSurrogate(lowSurrogate(x)) and toCodePoint(highSurrogate(x), lowSurrogate(x)) == x are also always true.

Parameters
`codePoint`	`int`: a supplementary character (Unicode code point)

Returns
`char`	the trailing surrogate code unit used to represent the character in the UTF-16 encoding

offsetByCodePoints

Added in API level 1

public static int offsetByCodePoints (CharSequence seq, 
                int index, 
                int codePointOffset)

Returns the index within the given char sequence that is offset from the given index by codePointOffset code points. Unpaired surrogates within the text range given by index and codePointOffset count as one code point each.

Parameters
`seq`	`CharSequence`: the char sequence
`index`	`int`: the index to be offset
`codePointOffset`	`int`: the offset in code points

Returns
`int`	the index within the char sequence

Throws
`NullPointerException`	if `seq` is null.
`IndexOutOfBoundsException`	if `index` is negative or larger then the length of the char sequence, or if `codePointOffset` is positive and the subsequence starting with `index` has fewer than `codePointOffset` code points, or if `codePointOffset` is negative and the subsequence before `index` has fewer than the absolute value of `codePointOffset` code points.

offsetByCodePoints

Added in API level 1

public static int offsetByCodePoints (char[] a, 
                int start, 
                int count, 
                int index, 
                int codePointOffset)

Returns the index within the given char subarray that is offset from the given index by codePointOffset code points. The start and count arguments specify a subarray of the char array. Unpaired surrogates within the text range given by index and codePointOffset count as one code point each.

Parameters
`a`	`char`: the `char` array
`start`	`int`: the index of the first `char` of the subarray
`count`	`int`: the length of the subarray in `char`s
`index`	`int`: the index to be offset
`codePointOffset`	`int`: the offset in code points

Returns
`int`	the index within the subarray

Throws

NullPointerException if a is null.

IndexOutOfBoundsException if start or count is negative, or if start + count is larger than the length of the given array, or if index is less than start or larger then start + count, or if codePointOffset is positive and the text range starting with index and ending with start + count - 1 has fewer than codePointOffset code points, or if codePointOffset is negative and the text range starting with start and ending with index - 1 has fewer than the absolute value of codePointOffset code points.

reverseBytes

Added in API level 1

public static char reverseBytes (char ch)

Returns the value obtained by reversing the order of the bytes in the specified char value.

Parameters
`ch`	`char`: The `char` of which to reverse the byte order.

Returns
`char`	the value obtained by reversing (or, equivalently, swapping) the bytes in the specified `char` value.

toChars

Added in API level 1

public static int toChars (int codePoint, 
                char[] dst, 
                int dstIndex)

Converts the specified character (Unicode code point) to its UTF-16 representation. If the specified code point is a BMP (Basic Multilingual Plane or Plane 0) value, the same value is stored in dst[dstIndex], and 1 is returned. If the specified code point is a supplementary character, its surrogate values are stored in dst[dstIndex] (high-surrogate) and dst[dstIndex+1] (low-surrogate), and 2 is returned.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be converted.
`dst`	`char`: an array of `char` in which the `codePoint`'s UTF-16 value is stored.
`dstIndex`	`int`: the start index into the `dst` array where the converted value is stored.

Returns
`int`	1 if the code point is a BMP code point, 2 if the code point is a supplementary code point.

Throws
`IllegalArgumentException`	if the specified `codePoint` is not a valid Unicode code point.
`NullPointerException`	if the specified `dst` is null.
`IndexOutOfBoundsException`	if `dstIndex` is negative or not less than `dst.length`, or if `dst` at `dstIndex` doesn't have enough array element(s) to store the resulting `char` value(s). (If `dstIndex` is equal to `dst.length-1` and the specified `codePoint` is a supplementary character, the high-surrogate value is not stored in `dst[dstIndex]`.)

toChars

Added in API level 1

public static char[] toChars (int codePoint)

Converts the specified character (Unicode code point) to its UTF-16 representation stored in a char array. If the specified code point is a BMP (Basic Multilingual Plane or Plane 0) value, the resulting char array has the same value as codePoint. If the specified code point is a supplementary code point, the resulting char array has the corresponding surrogate pair.

Parameters
`codePoint`	`int`: a Unicode code point

Returns
`char[]`	a `char` array having `codePoint`'s UTF-16 representation.

Throws
`IllegalArgumentException`	if the specified `codePoint` is not a valid Unicode code point.

toCodePoint

Added in API level 1

public static int toCodePoint (char high, 
                char low)

Converts the specified surrogate pair to its supplementary code point value. This method does not validate the specified surrogate pair. The caller must validate it using isSurrogatePair if necessary.

Parameters
`high`	`char`: the high-surrogate code unit
`low`	`char`: the low-surrogate code unit

Returns
`int`	the supplementary code point composed from the specified surrogate pair.

toLowerCase

Added in API level 1

public static int toLowerCase (int codePoint)

Converts the character (Unicode code point) argument to lowercase using case mapping information from the UnicodeData file.

Note that Character.isLowerCase(Character.toLowerCase(codePoint)) does not always return true for some ranges of characters, particularly those that are symbols or ideographs.

In general, String.toLowerCase() should be used to map characters to lowercase. String case mapping methods have several benefits over Character case mapping methods. String case mapping methods can perform locale-sensitive mappings, context-sensitive mappings, and 1:M character mappings, whereas the Character case mapping methods cannot.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be converted.

Returns
`int`	the lowercase equivalent of the character (Unicode code point), if any; otherwise, the character itself.

See also:

toLowerCase

Added in API level 1

public static char toLowerCase (char ch)

Converts the character argument to lowercase using case mapping information from the UnicodeData file.

Note that Character.isLowerCase(Character.toLowerCase(ch)) does not always return true for some ranges of characters, particularly those that are symbols or ideographs.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the toLowerCase(int) method.

Parameters
`ch`	`char`: the character to be converted.

Returns
`char`	the lowercase equivalent of the character, if any; otherwise, the character itself.

See also:

toString

Added in API level 1

public String toString ()

Returns a String object representing this Character's value. The result is a string of length 1 whose sole component is the primitive char value represented by this Character object.

Returns
`String`	a string representation of this object.

toString

Added in API level 1

public static String toString (char c)

Returns a String object representing the specified char. The result is a string of length 1 consisting solely of the specified char.

Parameters
`c`	`char`: the `char` to be converted

Returns
`String`	the string representation of the specified `char`

toString

Added in API level 35

public static String toString (int codePoint)

Returns a String object representing the specified character (Unicode code point). The result is a string of length 1 or 2, consisting solely of the specified codePoint.

Parameters
`codePoint`	`int`: the `codePoint` to be converted

Returns
`String`	the string representation of the specified `codePoint`

Throws
`IllegalArgumentException`	if the specified `codePoint` is not a valid Unicode code point.

toTitleCase

Added in API level 1

public static char toTitleCase (char ch)

Converts the character argument to titlecase using case mapping information from the UnicodeData file. If a character has no explicit titlecase mapping and is not itself a titlecase char according to UnicodeData, then the uppercase mapping is returned as an equivalent titlecase mapping. If the char argument is already a titlecase char, the same char value will be returned.

Note that Character.isTitleCase(Character.toTitleCase(ch)) does not always return true for some ranges of characters.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the toTitleCase(int) method.

Parameters
`ch`	`char`: the character to be converted.

Returns
`char`	the titlecase equivalent of the character, if any; otherwise, the character itself.

See also:

toTitleCase

Added in API level 1

public static int toTitleCase (int codePoint)

Converts the character (Unicode code point) argument to titlecase using case mapping information from the UnicodeData file. If a character has no explicit titlecase mapping and is not itself a titlecase char according to UnicodeData, then the uppercase mapping is returned as an equivalent titlecase mapping. If the character argument is already a titlecase character, the same character value will be returned.

Note that Character.isTitleCase(Character.toTitleCase(codePoint)) does not always return true for some ranges of characters.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be converted.

Returns
`int`	the titlecase equivalent of the character, if any; otherwise, the character itself.

See also:

toUpperCase

Added in API level 1

public static char toUpperCase (char ch)

Converts the character argument to uppercase using case mapping information from the UnicodeData file.

Note that Character.isUpperCase(Character.toUpperCase(ch)) does not always return true for some ranges of characters, particularly those that are symbols or ideographs.

In general, String.toUpperCase() should be used to map characters to uppercase. String case mapping methods have several benefits over Character case mapping methods. String case mapping methods can perform locale-sensitive mappings, context-sensitive mappings, and 1:M character mappings, whereas the Character case mapping methods cannot.

Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the toUpperCase(int) method.

Parameters
`ch`	`char`: the character to be converted.

Returns
`char`	the uppercase equivalent of the character, if any; otherwise, the character itself.

See also:

toUpperCase

Added in API level 1

public static int toUpperCase (int codePoint)

Converts the character (Unicode code point) argument to uppercase using case mapping information from the UnicodeData file.

Note that Character.isUpperCase(Character.toUpperCase(codePoint)) does not always return true for some ranges of characters, particularly those that are symbols or ideographs.

Parameters
`codePoint`	`int`: the character (Unicode code point) to be converted.

Returns
`int`	the uppercase equivalent of the character, if any; otherwise, the character itself.

See also:

valueOf

Added in API level 1

public static Character valueOf (char c)

Returns a Character instance representing the specified char value. If a new Character instance is not required, this method should generally be used in preference to the constructor Character(char), as this method is likely to yield significantly better space and time performance by caching frequently requested values. This method will always cache values in the range '\u0000' to '\u007F', inclusive, and may cache other values outside of this range.

Parameters
`c`	`char`: a char value.

Returns
`Character`	a `Character` instance representing `c`.

Character

Unicode Conformance

Unicode Character Representations

Summary

Nested classes

Constants

Fields

Public constructors

Public methods

Inherited methods

Constants

BYTES

COMBINING_SPACING_MARK

CONNECTOR_PUNCTUATION

CONTROL

CURRENCY_SYMBOL

DASH_PUNCTUATION

DECIMAL_DIGIT_NUMBER

DIRECTIONALITY_ARABIC_NUMBER

DIRECTIONALITY_BOUNDARY_NEUTRAL

DIRECTIONALITY_COMMON_NUMBER_SEPARATOR

DIRECTIONALITY_EUROPEAN_NUMBER

DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR

DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR

DIRECTIONALITY_FIRST_STRONG_ISOLATE

DIRECTIONALITY_LEFT_TO_RIGHT

DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING

DIRECTIONALITY_LEFT_TO_RIGHT_ISOLATE

DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE

DIRECTIONALITY_NONSPACING_MARK

DIRECTIONALITY_OTHER_NEUTRALS

DIRECTIONALITY_PARAGRAPH_SEPARATOR

DIRECTIONALITY_POP_DIRECTIONAL_FORMAT

DIRECTIONALITY_POP_DIRECTIONAL_ISOLATE

DIRECTIONALITY_RIGHT_TO_LEFT

DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC

DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING

DIRECTIONALITY_RIGHT_TO_LEFT_ISOLATE

DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE

DIRECTIONALITY_SEGMENT_SEPARATOR

DIRECTIONALITY_UNDEFINED

DIRECTIONALITY_WHITESPACE

ENCLOSING_MARK

END_PUNCTUATION

FINAL_QUOTE_PUNCTUATION

FORMAT

INITIAL_QUOTE_PUNCTUATION

LETTER_NUMBER

LINE_SEPARATOR

LOWERCASE_LETTER

MATH_SYMBOL

MAX_CODE_POINT

MAX_HIGH_SURROGATE

MAX_LOW_SURROGATE

MAX_RADIX

MAX_SURROGATE

MAX_VALUE

MIN_CODE_POINT

MIN_HIGH_SURROGATE

MIN_LOW_SURROGATE

MIN_RADIX

MIN_SUPPLEMENTARY_CODE_POINT

MIN_SURROGATE

MIN_VALUE

MODIFIER_LETTER

MODIFIER_SYMBOL

NON_SPACING_MARK

OTHER_LETTER

OTHER_NUMBER

OTHER_PUNCTUATION

OTHER_SYMBOL

PARAGRAPH_SEPARATOR

PRIVATE_USE

SIZE

SPACE_SEPARATOR

START_PUNCTUATION

SURROGATE

TITLECASE_LETTER

UNASSIGNED

UPPERCASE_LETTER