SocketChannel

SocketChannel

protected SocketChannel (SelectorProvider provider)

Initializes a new instance of this class.

bind

public abstract SocketChannel bind (SocketAddress local)

Binds the channel's socket to a local address.

This method is used to establish an association between the socket and a local address. Once an association is established then the socket remains bound until the channel is closed. If the local parameter has the value null then the socket will be bound to an address that is assigned automatically.

connect

public abstract boolean connect (SocketAddress remote)

Connects this channel's socket.

If this channel is in non-blocking mode then an invocation of this method initiates a non-blocking connection operation. If the connection is established immediately, as can happen with a local connection, then this method returns true. Otherwise this method returns false and the connection operation must later be completed by invoking the finishConnect method.

If this channel is in blocking mode then an invocation of this method will block until the connection is established or an I/O error occurs.

This method performs exactly the same security checks as the Socket class. That is, if a security manager has been installed then this method verifies that its checkConnect method permits connecting to the address and port number of the given remote endpoint.

This method may be invoked at any time. If a read or write operation upon this channel is invoked while an invocation of this method is in progress then that operation will first block until this invocation is complete. If a connection attempt is initiated but fails, that is, if an invocation of this method throws a checked exception, then the channel will be closed.

finishConnect

public abstract boolean finishConnect ()

Finishes the process of connecting a socket channel.

A non-blocking connection operation is initiated by placing a socket channel in non-blocking mode and then invoking its connect method. Once the connection is established, or the attempt has failed, the socket channel will become connectable and this method may be invoked to complete the connection sequence. If the connection operation failed then invoking this method will cause an appropriate IOException to be thrown.

If this channel is already connected then this method will not block and will immediately return true. If this channel is in non-blocking mode then this method will return false if the connection process is not yet complete. If this channel is in blocking mode then this method will block until the connection either completes or fails, and will always either return true or throw a checked exception describing the failure.

This method may be invoked at any time. If a read or write operation upon this channel is invoked while an invocation of this method is in progress then that operation will first block until this invocation is complete. If a connection attempt fails, that is, if an invocation of this method throws a checked exception, then the channel will be closed.

getLocalAddress

public abstract SocketAddress getLocalAddress ()

Returns the socket address that this channel's socket is bound to.

Where the channel is bound to an Internet Protocol socket address then the return value from this method is of type InetSocketAddress.

If there is a security manager set, its checkConnect method is called with the local address and -1 as its arguments to see if the operation is allowed. If the operation is not allowed, a SocketAddress representing the loopback address and the local port of the channel's socket is returned.

getRemoteAddress

public abstract SocketAddress getRemoteAddress ()

Returns the remote address to which this channel's socket is connected.

Where the channel is bound and connected to an Internet Protocol socket address then the return value from this method is of type InetSocketAddress.

isConnected

public abstract boolean isConnected ()

Tells whether or not this channel's network socket is connected.

isConnectionPending

public abstract boolean isConnectionPending ()

Tells whether or not a connection operation is in progress on this channel.

open

public static SocketChannel open ()

Opens a socket channel.

The new channel is created by invoking the openSocketChannel method of the system-wide default SelectorProvider object.

open

public static SocketChannel open (SocketAddress remote)

Opens a socket channel and connects it to a remote address.

This convenience method works as if by invoking the open() method, invoking the connect method upon the resulting socket channel, passing it remote, and then returning that channel.

read

public abstract long read (ByteBuffer[] dsts, 
                int offset, 
                int length)

Reads a sequence of bytes from this channel into a subsequence of the given buffers.

An invocation of this method attempts to read up to r bytes from this channel, where r is the total number of bytes remaining the specified subsequence of the given buffer array, that is,

 dsts[offset].remaining()
     + dsts[offset+1].remaining()
     + ... + dsts[offset+length-1].remaining()

Suppose that a byte sequence of length n is read, where 0 <= n <= r. Up to the first dsts[offset].remaining() bytes of this sequence are transferred into buffer dsts[offset], up to the next dsts[offset+1].remaining() bytes are transferred into buffer dsts[offset+1], and so forth, until the entire byte sequence is transferred into the given buffers. As many bytes as possible are transferred into each buffer, hence the final position of each updated buffer, except the last updated buffer, is guaranteed to be equal to that buffer's limit.

This method may be invoked at any time. If another thread has already initiated a read operation upon this channel, however, then an invocation of this method will block until the first operation is complete.

read

public abstract int read (ByteBuffer dst)

Reads a sequence of bytes from this channel into the given buffer.

An attempt is made to read up to r bytes from the channel, where r is the number of bytes remaining in the buffer, that is, dst.remaining(), at the moment this method is invoked.

Suppose that a byte sequence of length n is read, where 0 <= n <= r. This byte sequence will be transferred into the buffer so that the first byte in the sequence is at index p and the last byte is at index p + n - 1, where p is the buffer's position at the moment this method is invoked. Upon return the buffer's position will be equal to p + n; its limit will not have changed.

A read operation might not fill the buffer, and in fact it might not read any bytes at all. Whether or not it does so depends upon the nature and state of the channel. A socket channel in non-blocking mode, for example, cannot read any more bytes than are immediately available from the socket's input buffer; similarly, a file channel cannot read any more bytes than remain in the file. It is guaranteed, however, that if a channel is in blocking mode and there is at least one byte remaining in the buffer then this method will block until at least one byte is read.

This method may be invoked at any time. If another thread has already initiated a read operation upon this channel, however, then an invocation of this method will block until the first operation is complete.

read

public final long read (ByteBuffer[] dsts)

Reads a sequence of bytes from this channel into the given buffers.

An invocation of this method of the form c.read(dsts) behaves in exactly the same manner as the invocation

 c.read(dsts, 0, dsts.length);

setOption

public abstract SocketChannel setOption (SocketOption<T> name, 
                T value)

Sets the value of a socket option.

shutdownInput

public abstract SocketChannel shutdownInput ()

Shutdown the connection for reading without closing the channel.

Once shutdown for reading then further reads on the channel will return -1, the end-of-stream indication. If the input side of the connection is already shutdown then invoking this method has no effect.

shutdownOutput

public abstract SocketChannel shutdownOutput ()

Shutdown the connection for writing without closing the channel.

Once shutdown for writing then further attempts to write to the channel will throw ClosedChannelException. If the output side of the connection is already shutdown then invoking this method has no effect.

socket

public abstract Socket socket ()

Retrieves a socket associated with this channel.

The returned object will not declare any public methods that are not declared in the Socket class.

validOps

public final int validOps ()

Returns an operation set identifying this channel's supported operations.

Socket channels support connecting, reading, and writing, so this method returns (SelectionKey.OP_CONNECT | SelectionKey.OP_READ | SelectionKey.OP_WRITE).

write

public abstract int write (ByteBuffer src)

Writes a sequence of bytes to this channel from the given buffer.

An attempt is made to write up to r bytes to the channel, where r is the number of bytes remaining in the buffer, that is, src.remaining(), at the moment this method is invoked.

Suppose that a byte sequence of length n is written, where 0 <= n <= r. This byte sequence will be transferred from the buffer starting at index p, where p is the buffer's position at the moment this method is invoked; the index of the last byte written will be p + n - 1. Upon return the buffer's position will be equal to p + n; its limit will not have changed.

Unless otherwise specified, a write operation will return only after writing all of the r requested bytes. Some types of channels, depending upon their state, may write only some of the bytes or possibly none at all. A socket channel in non-blocking mode, for example, cannot write any more bytes than are free in the socket's output buffer.

This method may be invoked at any time. If another thread has already initiated a write operation upon this channel, however, then an invocation of this method will block until the first operation is complete.

write

public final long write (ByteBuffer[] srcs)

Writes a sequence of bytes to this channel from the given buffers.

An invocation of this method of the form c.write(srcs) behaves in exactly the same manner as the invocation

 c.write(srcs, 0, srcs.length);

write

public abstract long write (ByteBuffer[] srcs, 
                int offset, 
                int length)

Writes a sequence of bytes to this channel from a subsequence of the given buffers.

An attempt is made to write up to r bytes to this channel, where r is the total number of bytes remaining in the specified subsequence of the given buffer array, that is,

 srcs[offset].remaining()
     + srcs[offset+1].remaining()
     + ... + srcs[offset+length-1].remaining()

Suppose that a byte sequence of length n is written, where 0 <= n <= r. Up to the first srcs[offset].remaining() bytes of this sequence are written from buffer srcs[offset], up to the next srcs[offset+1].remaining() bytes are written from buffer srcs[offset+1], and so forth, until the entire byte sequence is written. As many bytes as possible are written from each buffer, hence the final position of each updated buffer, except the last updated buffer, is guaranteed to be equal to that buffer's limit.

Unless otherwise specified, a write operation will return only after writing all of the r requested bytes. Some types of channels, depending upon their state, may write only some of the bytes or possibly none at all. A socket channel in non-blocking mode, for example, cannot write any more bytes than are free in the socket's output buffer.

This method may be invoked at any time. If another thread has already initiated a write operation upon this channel, however, then an invocation of this method will block until the first operation is complete.